Question about 1993 Chrysler Lebaron

1 Answer

I have a 1993 Chrysler Lebaron Convertible with 3.0 L V-6 and automatic 3 spd w/overdirve transmission. A couple of years ago, the transmission went into "limp-in" mode a couple of times, then seemed to "heal itself". Last week I got about 4 miles down the road, then the trans slipped out of gear. It would go into and out of gear, but was in 2nd gear whenever I could get it to go. Reverse went out as well. I'd like to get a scanner readout, but have been told that there is a second port to get transmission readings. Can I use and OBD2 scanner to determine if there is a sensor problem on the transmission?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

My friend, from the sounds of it a scanner is not going to help you. It sounds like your valve assembly and possibly one or more of the bands are shot. Usually, when a tranny starts to slip in and out of gear on it's own or slips under a load that is not something that can be fixed without replacing parts. If it was a shift solenoid then it would just not shift into or out of certain gears. I am not even sure that a 93 would have an electric shift solenoid.

I feel your pain though, my tranny went out 8 months ago and I tried all sorts of things to "heal" it, from flushes to new cooler to additives but deep down, I knew it was shot and it was. Now, $3500 later, it runs fine :)

Posted on Mar 23, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 Chrysler LeBaron Convertible with 6-way power seat.


This sounds like you have a defective switch to me. But make sure because it is not a returnable part. If the switch doesn't cure the problem you must replace the entire seat track assembly, they do not service parts for it. You can buy the switch at www.rockauto.com for about $70.00 including shipping.

Jul 15, 2016 | 1993 Chrysler Lebaron

1 Answer

I have a1993 chrysler lebaron ,3.0 v6 where is oil sending unit located


no Not all ways true I changed the Oil sending unit on My 1993 Chrysler lebaron convertible 3.0 Now it is still Leaking and it is not the oil filter the leak is above the oil filter. some where it is not from the engine block area !!! I replace valve cover Gaskets . and Oil sending unit. thank u . still coming from above the Filter and it is not th e filer.......

Feb 17, 2014 | 1993 Chrysler Lebaron

1 Answer

Do u know the firng order for a 1991 chrysler lebaron convertible 3Liter 6 cylinder motor


Check this diagram for 1991 Chrysler Lebaron 3.0 liter SOHC V-6 VIN "3"

zjlimited_788.gif

Hope this helps (remember to rating this free answer and leave a testimonial comment).

Oct 12, 2011 | 1991 Chrysler LeBaron

1 Answer

Firing order 1993 3.0 liter chrysler lebaron diagram


Check this for 1993 Chrysler Lebaron 3.0 liter SOHC V-6 VIN "3"

zjlimited_734.gif

In this link find additional details about Car's Firing Order

Hope this helps (remember to rate and comment this free answer; leave an testimonial).

Sep 26, 2011 | 1993 Chrysler Lebaron

1 Answer

I need a picture or instructions showing how to replace front turn signal bulbs in a 93 lebaron convertible


Resmove the two screws that secure the light housing, pull the housing out to expose the bulb socket,turn the socket clockwise to remove it from the housing, pull the bulb out and replace and reinstall

Aug 22, 2010 | 1993 Chrysler Lebaron

3 Answers

I have a 1992 Lebaron Convertible. @ 36 months


Have you tried jump starting it? Low voltage can cause lots of issues. It could be a bad alternator.

May 17, 2010 | 1995 Chrysler LeBaron

1 Answer

1993 chrysler lebaron steering belt


I'm sorry, I don't think you can get a pic for free, this will cost 25 bucks, or look for it on eBay for cheaper, a Haynes repair guide. http://haynes.com/products/?searchType=vehicleApplicationSearch2&searchEnd=yes&sfID1=&sfID2=&sfID3=&year=1993&make=Chrysler&model=LeBaron&x=6&y=6 copy and paste that into your address bar, or click if it's blue.

Jan 31, 2009 | 1993 Chrysler Lebaron

Not finding what you are looking for?
1993 Chrysler Lebaron Logo

444 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

80263 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...