Question about 1997 Toyota Camry

1 Answer

Just changed the oil it ran fine for 30 mins. then started losing power .parked it checked it the next day all the oil was on the ground checked all obvious things . no cracks plugs n pan . used diff oil filter is all i did diff

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 878 Answers

Sometimes the old oil ring from filter stays stuck , i suggest you take oil filter down and make sure that the old ring is not stuck up there good luck

Posted on Mar 23, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Dying 1996 Jeep Grand Cherokee Limited


I wouldn't think catalytic converter, without it giving some indication that it was going bad, but without testing it is hard to say.
When it cranks and won't start, check for battery voltage to the coil on the dark green wire, with key ON. If you have power at the coil, it might be a bad coil. If no power to the coil, it could be a Crank Position Sensor or the Cam Position Sensor inside the distributor. If one of those is bad, it can stop the computer from sending power to the coil.
Good luck.

Jul 06, 2012 | Jeep Grand Cherokee Cars & Trucks

1 Answer

89 K5 Blazer 350 TBI cranks but won't start... the rad hose blew, i fixed it then the next day it bogged and backfired, ran fine cold, but when warmed up it would lose power and stall when trying


Have you checked Google I found this hopefully it's not your timing or it may be flooded but doubtful have you tried spraying starting fluid into the intake while cranking it

Jun 01, 2012 | Cars & Trucks

1 Answer

Battry keeps draing


i'd have the battery and charging system checked

Jan 24, 2010 | 1991 Chevrolet Suburban

1 Answer

2002 BMW 325xi, doesn't start after oil change


It sounds like just a coincidence. I dont know what a GRR noise is supposed to mean. It either Cranks, No Crank, or it Cranks but does not Run. Just tow it to a qualified shop and find out what the problem is.

Dec 31, 2009 | 2003 BMW 325

1 Answer

Temp light comes on car dies and wont start until cools


id say its your thermostat
let me know how you make out

May 11, 2009 | 1989 Oldsmobile Cutlass Ciera

1 Answer

75 Stingray stalled while driving


Sounds like the ICM is going bad.(Unless for some weird reason you have points)It is locate inside the distributor.

I had the same problem on my firebird after it was parked for 3 months,the heat grease just broke down and allowed it to over heat.

You should also check the fuel screen on the fuel inlet.


Please rate this a fixya

Jan 30, 2009 | 1986 Buick Regal

Not finding what you are looking for?
1997 Toyota Camry Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...