Question about 2009 Hyundai Sonata

1 Answer

Where is the interior trim code located on a 2009 sonata?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,280 Answers

There are a few labels & a plate on the driver's door "B" pillar (below the door latch bolt). The black plate will give you two different paint codes. One for Interior and another for Exterior.

Posted on Mar 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the oil pressure sensor located on my 2.4l 2009 Hyundai sonata


you should find it near the front off engine @ crank pulley/oil pump area or near the oil filter housing

Dec 11, 2016 | 2009 Hyundai Sonata

1 Answer

How do I find the interior trim code? How many digits is it? It's a 2012 Ford Edge.


It's usually located on the drivers side door jamb. Like this info I found on the Internet. Interior trim code should be on the bottom part of label usually says INT TR for interior trim. Should be two digits. Like "4W" as an example. Good luck

26163865-0yogasqv4okla5taqdrpkjsb-2-0.jpeg

Apr 14, 2016 | Cars & Trucks

1 Answer

How do I replace the audio fuse in a 2009 Hyundai sonata


The fuse listing will be on the inside cover of the fuse block. Cars uaually have 2 of them.

Dec 06, 2014 | 2009 Hyundai Sonata

1 Answer

How do U replace dash lights on 09 Sonata?


take off outer trim molding usually clip on or few screws and that should open up to mounting brackets or more screws to the instrument cluster. once you have the instrument panel or cluster out you should see access to the lights.

Sep 27, 2014 | 2009 Hyundai Sonata

1 Answer

Hi guys, my 2009 Dodge Grand Caravan get a code C2204 ( Dynamic Internal Sensor) and I want to change the sensor, Can any one tell where is it located? Any help is appriciated. Thank u


REMOVAL

  1. Disconnect and isolate the battery negative cable from its battery post.
  2. Remove the instrument panel center stack console. See: Body and Frame\Interior Moulding / Trim\Dashboard / Instrument Panel\Service and Repair\Instrument Panel Bin - Removal

asetech74.jpg
  1. Roll back the front floor carpet from under the instrument panel toward the rear of the vehicle for access to components. See: Body and Frame\Interior Moulding / Trim\Carpet\Service and Repair\Carpet - Removal
  2. Remove the fasteners (2), then instrument panel center support brackets (2). There is one bracket on each side of tunnel structure.

asetech74_0.jpg 5. Disengage the right intermediate floor distribution duct (2) from the stud located on the floor support (3) and move it aside as necessary to access the dynamics sensor.


asetech74_1.jpg
  1. Disconnect the wiring harness connector (3) at the dynamics sensor (2).
  2. Remove the screws (1) mounting the dynamics sensor to the mounting bracket on the floor pan tunnel (4).
  3. Remove the dynamics sensor (2).

asetech74_2.jpg
Hope this helps....

Sep 16, 2011 | Dodge Grand Caravan Cars & Trucks

1 Answer

How to remove interior panel from tailgate?


Remove the liftgate pull handle. Refer to Liftgate Inside Pull Handle Replacement .
DO NOT attempt to remove the liftgate trim panel if there is a failure of the electric latch. Refer to Opening the Liftgate Without Electrical Power .
1
Liftgate Trim Finish Panel
2
Liftgate Trim Finish Retainer Clips (Qty: 2)
3
Liftgate Lower Trim Finish Panel
4
Liftgate Trim Finish Retainer Clips (Qty: 14)
mrtechwrench_6.gif

Nov 22, 2010 | 2009 Chevrolet HHR

2 Answers

How to remove 2001 hyndai sonata audio system


Instructions
Things You'll Need:
  • Screwdrivers
  • Wiring harness adaptor
  • Hyundai radio adaptor kit
  1. Open the coin holder and remove the two screws at the front. Pry the trim from around the gearshift lever and unhook the power wire to the cigarette lighter.
  2. Locate and remove the two screws from the bottom of the radio trim panel. Look for the screws, attached to a rod, below the glove box. Unhook the cable from the rod and pull the rod free.
  3. Place the shifter into "D" and slide the radio trim panel away from the dash. Locate the four screws at the front and sides of the stereo and remove them.
  4. Pull the stereo out of the Hyundai Sonata dash and disconnect the wires from the back of the unit. Connect the wiring harness adaptor to the original harness.
  5. Slide the new head unit into the Hyundai radio adaptor kit. Attach the wiring harness adaptor and antenna wire to the back of the new head unit and push the entire assembly into the dash.
  6. Secure the stereo in place with the four front and side screws and turn it on. Verify all of the speakers and features are working. Reattach the radio trim panel, insert the rod back into cable assembly and secure the trim around the gear shift.

In here you can find tips about remove radio...
- Hyundai Car Stereo removal
- Stereo Removal Hyundai (buy)

I really hope help you with this (remember rated this help). Good luck.

Oct 01, 2009 | 2001 Hyundai Sonata

1 Answer

Remove and replace passenger door mirror on 2009 ford explorer XLT, main part , I don't know how to remove the interior door panel. Pictures might help,


  1. Remove the front door trim panel handle bezel cover.
  1. Remove the front door trim panel handle bezel screws.
  1. Remove the front door trim panel lower screws.
NOTICE: To avoid damaging the front door trim panel, do not pull the bottom of the panel outward.
  1. Remove the front door trim panel by lifting upward on the armrest to disengage the panel clips.
  1. Disconnect the electrical connectors.
  1. Disconnect the lock rod cable from the front door trim panel.
  1. Disconnect the door handle conduit and cable from the front door trim panel.
  1. To install, reverse the removal procedure.

be patient during these procedures to not damage the trim panel...they cost $150>275 ec........GL hope this helps

Jul 06, 2009 | 2009 Ford Explorer

2 Answers

Hyundai Sonata Outside temperture location


front bumper bracket behind the lower grill.

Apr 21, 2009 | 2009 Hyundai Sonata

Not finding what you are looking for?
2009 Hyundai Sonata Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...