Question about 2005 Chrysler Sebring Conv

2 Answers

Back glass coming loose from the vinal

Well i had the cack glass repalced under my service contract .two days later i noticed the glass was comming loose from the vinal . i went back to the dealer and now they want to glue it. i told them i want it replaced and they said they have to fix it. i called chrysler custermer service and all they did was say it is up to the dealer. so i went to another dealer and they said it needs to be replaced . and i also called a dearler and they said they dont make a repair kit to glue it bacl to the glass. so i still can not get the dealer to replace it. i fell it is a brand new part and it should be replaced any one who might help i thank you

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Who to but on a back window of a chrysler sebring 2000 Convertible
like what kind of glue or tape will it take because we have the window so what do we so post to do?

Posted on Nov 04, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

I had the vynal pull away from the bottom of the glass on mine. Fortunetly it was still under the 36,000 mile warrenty. Took it to 2 different dealers and both told me it is a common problem but the back glass had to be replaced because the vynal comes with the glass and reglueing won't work because the vynal shrinks over time. Hopefully that helps.

Posted on Oct 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Spewing coolant


You could have a pin hole in your hose or in your radiator.

Oct 30, 2013 | 2001 Toyota Camry Solara

1 Answer

Hissing noise from under the hood- passenger side.


loose hose clamps hole in one of the vac lines it seems to only hiss when its under pressure

Jan 26, 2013 | 2004 Pontiac Grand Am

1 Answer

Sraying Coolant


clean the engine compartment and fill the radiator start the car and let it idle until you find the coolant leak

Jan 12, 2010 | 2001 Chrysler Sebring

2 Answers

Gross leak evap code


your evap vent solenoid needs replaced this part is located by the evap canister under the car.

Jul 27, 2009 | 2001 Hyundai Sonata

2 Answers

Holden Rodeo 2001, check engine light keeps coming on!?


I'm having same problem on my 2000 model rodeo 4wd 3.2L V6. Other day check engine light came on. I checked engine bay nothing abnormal, or power loss. Next day light was gone. 2 days later driving, a sudden loss of power and light came up. After idling for a couple of minutes, drove off with light still on but all power back. 1 hour later of faultless driving loss of power for a minute or so. Engine temp normal. Had break for 1/2 hour and set off for last hour of journey without fault except check engine light still on. Following dayon startup light went out???
Seeking help from experts.

Feb 09, 2009 | 2000 Isuzu Rodeo

1 Answer

Exterior vinal strip


not glue use what came factory on it meaning double sided tape. i kn ow that sounds dumb but double sided tape is actually a foam adheisive strip that is actually quite strong and more reliable and quicker than glue. just go to the local parts store and ask for it double sided molding tape

Aug 27, 2008 | 2000 Chevrolet Impala

1 Answer

Flywheel area, possibly transmission


the noise might be from a loose bendix on the starter,
the bendix is a little gear in fron of the starter see if there is any visual point to see it nad make sure it keeps away from the flywheel if not have the starter repalced, this bendix have a spring to keep it away from the flywheel also with a flash ligh try to see the closes you can to the center of flywheel sometimes they get crack where they atached to the engine,
and on the shifting might be a bad transmission or the shifter has to be inspected for your mechanic

May 31, 2008 | 1983 Chevrolet Silverado

Not finding what you are looking for?
Cars & Trucks Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...