Question about 2006 Chrysler Town & Country

Open Question

My headrest sleeve on the seat behind the driver's seat comes out when I pull the headrest up. I'm getting a replacement. Do I just push the new one down into the hole and hope it catches and stays in tightly?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 10 Answers

SOURCE: Front Seat Headrest

press and keep holding the release button between top of seat and the headrest and pull the headrest all the way up

Posted on Nov 19, 2008

  • 33 Answers

SOURCE: 2002 pt cuiser does the headrest come off i have new seat covers.

small hole in headrest base use small pin punch (or very stiff wire) press in hole and pull headrest up

Posted on Jan 07, 2009

  • 1 Answer

SOURCE: Removal of headrest on 2005 Ford F150.

i have a 1989 lincoln town car i would to remove the headrest can you help me

Posted on Jan 11, 2009

Kenny_praja
  • 4 Answers

SOURCE: how do you remove the venture headrests? i want to

There is tool required by GM dealership to remove head rest.

Tool # J 42372

Pull the seat toward steering wheel. Raise the head rest and insert the tool and take it off.

Posted on Sep 29, 2009

  • 1 Answer

SOURCE: How to fold down the back seats of my 90 camry?

ON MY 1990 CAMRY IN THE TRUNK LOCATED ON THE BACK SEAT IS A TYPE OF SWITCH TO UN LOCK THE SEAT THEN INSIDE MY CAR AT THE HEAD REST ON EACH SIDE YOU PULL UP ON THIS BUTTON LOOKING THING AND THE SEAT FOLDS DOWN
MY SEAT IS A SPLIT BACK WITH IT DOWN YOU CAN CLIMB RIGHT THROUGH TO THE TRUNK

Posted on Oct 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove headrest on 2006 sebring


Just removed them on a 2005 Sebring sedan. Easier with two people but one can manage just fine. The trick is a tiny hole in the plastic "sleeves" that the metal posts on the headrest slide into. You'll need a small poking device-Allen wrench, drill bit, tiny screw driver, whatever. The hole is on the right side of the right side sleeve on each headrest (as you're sitting in the back seat facing forward) and is perpendicular to the direction the metal rods go into the sleeves. Insert your small poker and depress the plastic button on the other plastic sleeve simultaneously while your helper pulls up on the headrest.

May 05, 2012 | Chrysler Sebring Cars & Trucks

2 Answers

How to remove the headrests to put seat covers on for a 1989 crown victoria?


90% of head rests just pull out. the others will have a button where the headrest goes into the seat. If yours doesn't have the button, then push the headrest down and **** it up with some force and it will come out. Just be carefull you don't hit yourself in the face with it. Been there done that

Feb 08, 2011 | 1996 Ford Crown Victoria

1 Answer

How do you remove the headrest on a 1998 daewoo


hi normally you can do this by...pulling the headrest top its maximum height , at the bottom you should see two black plastic rings, on either side of these rings are little partitions push these inward and pull the headrest at the same it can be a bit awkward but if you do one side at a time or get someone to pull the headrest while you push the clips in can be very helpfull...hope this helps please vote thanks

May 11, 2010 | 1999 Daewoo Lanos

1 Answer

How to remove the head rest from the driver's seat 05 sunfire


There should be tiny holes in the plastic covers at the base of the chrome rods attached to the headrest use a paper clip and push it in the holes as you pull on the headrest in the full up postion.

Dec 23, 2009 | Pontiac Sunfire Cars & Trucks

1 Answer

Cannot remove back seat headrests for 98 328i


Im doing the same thing.. Push the headrest full forward, then lift hard to get past last indent in pole.. This worked for the front as well.. i also could not find a hole to push

Apr 05, 2009 | 1998 BMW 3 Series

1 Answer

How do you remove the headrest on a 1996 ford crown victoria?


Head Restraints Each front seat is equipped with dual-post design front seat back head restraint (611A08). The front seat back head restraint is installed as follows:
  • It travels on dual posts which have notches to engage a spring-loaded catch in the guide.
  • The front seat back spring assembly retains the front seat head rest guide rod sleeve (610A16).
  • The front seat back head restraint is adjustable from its normal position to a raised position of approximately 25 mm (1 inch).
  • Pull up on the front seat back head restraint to raise it. Pushing down will return it to its normal position.
----------------------------------------------------------------------------------------------

Removal
  1. Unscrew front seat head rest guide rod retainers (610A18).
  1. Pull up on front seat back head restraint (611A08). Compress foam in area of front seat head rest guide rod sleeves (610A16).
  1. Remove front seat back head restraint positioning springs. Pull front seat back head restraint up and out.
Installation
  1. Slide front seat head rest guide rod retainers onto front seat back head restraint posts.
  1. Compress foam in front seat head rest guide rod sleeve area. Install positioning springs on front seat head rest guide rod sleeves.
  1. Insert front seat back head restraint posts (notches on posts facing rearward) into front seat head rest guide rod sleeves and push down to engage positioning spring.
  1. Tighten front seat head rest guide rod retainers onto front seat head rest guide rod sleeves.
  1. NOTE: Front seat back head restraint must operate smoothly throughout its range of travel, must remain in any fixed position, and must not be freely removable from the seat back. If any of these conditions are not met, check for proper installation of positioning spring onto front seat head rest guide rod sleeve.

    Adjust front seat back head restraint by applying hand pressure, either up or down, to center area of front seat back head restraint.

Mar 01, 2009 | 1996 Ford Crown Victoria

1 Answer

Remove 2003 saturn vue headrest


lift headrest to maximum and depress plastic sleeve button where the headrest shat come out off

Jan 11, 2009 | 2005 Saturn VUE

1 Answer

2002 pt cuiser does the headrest come off i have new seat covers.


small hole in headrest base use small pin punch (or very stiff wire) press in hole and pull headrest up

Jan 07, 2009 | 2001 Chrysler PT Cruiser

2 Answers

Toyota tacoma headrest removal


There should be a button on the base of the headrest to raise & lower it. Push the button, and lower it. With the button pushed, raise the headrest, and pull hard. They ARE tight.

Jun 25, 2008 | 1999 Toyota Tacoma PreRunner

Not finding what you are looking for?
2006 Chrysler Town & Country Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...