Question about 1985 Chevrolet Corvette

1 Answer

1994 CHEVY CORVETTE, PULLED A DI DISTRIBITOR OUT PUT BACK NOW WILL NOT FIRE.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,915 Answers

Hooked up the harness, right? Is the rotor back in? the only other thing is it is not lined up properly, and you will have to get the engine to #1 compression at TDC and pull the distributor, line the rotor up to #1 wire on the cap.

Posted on Mar 23, 2011

  • tlalvarez Mar 23, 2011

    ths is not for the HEI it is the DI bottom. Do U set the distributer thes same as a HEI?

  • mike mountain Mar 23, 2011

    it is the same procedure.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do put my 1991 Chevy C1500 truck with 4.3 back n time on motor and distribitor


PULL THE SPARKPLUG OUT OF THE #1 CYLINDER ROTATE ENGINE OVER TO FIND TOP DEAD CENTER ON COMPRESSION STROKE REMOVE DIST. CAP AND SEE WHERE THE ROTOR IS POINTING AND ADJUST SO THE
#1 WIRE IS LINED UP WITH IT

Nov 20, 2012 | Cars & Trucks

1 Answer

98 nissan pathfinder 3.0 wont start new distribitor no fire


What do you mean "the battery still no fire"?

Do you mean that there is no spark at the spark plug?
Have you pulled out a plug, grounded it and cranked the engine to check to see what colour (if any) the spark is?
If there is no spark at the plug, then either change the plugs if they look to be in very poor condition, or change the coil.

Nov 13, 2012 | 1998 Nissan Pathfinder

1 Answer

1996 chevy throttle body rough idle back fires when coming to stop


ignition module replace or pickup in distributor replace

Mar 09, 2012 | Chevrolet Cars & Trucks

1 Answer

I have changed twice the MAP sensor in Chevy Corvette 1994, but the car continues to run extremely rich


check the vacuum line on the fuel pressure regulator. If there is fuel in it, replace the regulator.

Dec 06, 2010 | 1994 Chevrolet Corvette

1 Answer

1985 corvette - it back fires like pops through the exhaust and we did a tune up . it had split fire spark plugs and we put ngk's


You might check to make sure the plug wires are not on the wrong plug.
Also make sure the plg wires are not damaged from pulling on and off.
There are other things to check depending on what things you did to do the tune up

Oct 11, 2010 | 1985 Chevrolet Corvette

1 Answer

Truck doint start.


You got a mess for sure.Bring the number one cylinder up on tdc,then pull the distributor out reinstall with the rotor pointing to the number on cylinder.You will have to go the your local library,most shops will not take food out of their families mouths any more times are hard. But you never know,If you ask nicely some shop will help you,try pepboys?

Jul 23, 2009 | 1989 Chevrolet C1500

1 Answer

My 89 chevy 4.3 truck doesnt start ,i did the hole top half.


Your distributor is 180 degrees out....you need to turn it 180 degrees from the position it is in.

Jul 23, 2009 | 1989 Chevrolet S-10 Blazer

1 Answer

Put 350 chevy motor lost track of distribitor wire


the power to the dist needs to be switched, so no you cant go to the starter...and yes you can plug the return

Apr 18, 2009 | 1984 Oldsmobile Cutlass

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...