Question about 2006 Chevrolet Impala

1 Answer

I went to start my car and the engines would not turn over. I assumed my battery was dead because my remote would not unlock my door my radio doesnt work windows ect. Put in a new battery and still will not start.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 388 Answers

Check both ends of the battery cables to be sure there is no corrosion causing them not to make good contact. Also check the full length of the cables as sometimes a cable insulation will crack and corrosion can build up inside the cable.

Posted on Mar 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Someone broke in to my car (TSX 2004); the car doesn't want to start anymore. Head lights come on, there is no power to the radio and the starter doesn't want to turn the engine... How do I get the ca


charge the battery.
so that wnen rested it reads 12.6vdc. then it will start.
also check all fuses in both fuse boxes.
they might have tried hot wiring things (like on TV) and blew fuses.
the battery is first. no power, all toys and EFI go , dumb.

Jan 20, 2014 | 2004 Acura TSX

1 Answer

For about the last week or two, my car door locks just continually unlock, as if someone is pushing the unlock button on the key fob. It does this even when the keys are not it in, and while it's


Sounds like you have button to one of your door locks that is stuck, you remove door lock switches and disconnect 1 at a time to see which one it is. Over time a stuck switch will drain the battery it's sending voltage to all locks constantly, there's a switch tied to ignition switch on some models that locks door when you start the engine and unlocks doors when you shut the engine off, Chev. Suburbans have that

Mar 26, 2013 | 2006 Chevrolet Cobalt

1 Answer

95 ford explorer battery went dead due to lights being left on, now keypad doesnt work


try closing and locking all the doors then unlock the drivers door with the key

Feb 26, 2012 | 1995 Ford Explorer

1 Answer

97 Saturn sl. battery went dead,,replaced


Did you check the alternator? if it is faulty the car will drain all the power from the battery until it goes flat

Jul 09, 2010 | 1997 Saturn SL

1 Answer

Battery went dead in 2007 Chevy Silverado truck. Now, remote does not work. Replaced battery in remote and it still does not work.


Make sure you have one working ignition key and all remotes for the vehicle.

1) Close all vehicle doors.
2) Insert the key into the ignition.
3) Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release in step 9.
4) Perform steps 5 through 8 in fairly rapid succession.
5) Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6) Turn the ignition switch to the OFF position.
7) Turn the ignition switch to the ON position.
8) Turn the ignition switch to the OFF position.
9) Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10) Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11) Repeat step 10 NOW for each additional transmitter (including any existing transmitters).
12) Turn the ignition switch OFF then to the ON position in order to exit the transmitter programming mode.

Feb 28, 2010 | 2007 Chevrolet Silverado 1500 2WD

1 Answer

Battery went dead so remote does not unlock door.


Call AAA or CAA and get em to use a slim jim to open door, probably cost $50

Feb 27, 2010 | 2008 Dodge Avenger

1 Answer

2006 kia spectra. The power door locks


security ----encrypted software dealer only

Dec 03, 2009 | 2006 Kia Spectra

1 Answer

Vue 2003 saturn


try locking and unlocking the car with the remote, maybe a anti-theft issue?? what do you mean" tries to start?" either the engine turns over or it doesnt. if it turns over, but wont run, thats another story.

Sep 21, 2009 | 2005 Saturn VUE

1 Answer

No sound from radio / now car totally dead


Its you antenna module above your headliner. It controlls your remote for keyless entry as well as your am/fm reception via an amplifier. GM part number is 12233252 for updated and revised version around $100 bucks online.

Jun 15, 2009 | 2003 Cadillac CTS

1 Answer

Need to re-program 2000 Chev.C3500 key fob need help


1. Close all doors
2. Insert key into ignition
3. Hold down the power UNLOCK button on the driver's door panel, continue to hold down
until instructed to release in step 9.

4. Perform steps 5 through 8 in a fairly rapid succession.
5. Turn the ignition to the ON position (as far as you can go without starting the engine.)
6. Turn the ignition to the OFF position.
7. Turn the ignition to the ON position (as far as you can go without starting the engine.)
8. Turn the ignition to the OFF position.
9. Release the power UNLOCK button on the door panel. The vehicle should respond by
door locks locking and unlocking automatically. (If locks do not cycle after you let go,
not before you let go of the unlock button, then the vehicle has not entered programming
mode and you must start procedure over. Remove key from ignition, open drivers door
and return to step 1 ). If the locks do cycle automatically then proceed to step 10.

10. Hold down the LOCK and UNLOCK buttons on the remote until the doors lock and
unlock. This may take up to 30 seconds.

11. Repeat step 10 NOW for each additional remote. (Including any existing remotes).
12. Turn the ignition to the ON position to exit the programming mode.
13. Test remote(s).

Jun 09, 2009 | 1999 Chevrolet Tahoe

Not finding what you are looking for?
2006 Chevrolet Impala Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...