Question about 2002 Chrysler Town & Country

1 Answer

Front passenger door window slowly rolled down by itself. it will not go back up. motor works, can hear it.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,044 Answers

You need to open the door up and replace the track that controls the up and down motion if it is broken. If that is in 1 piece and it still isn't working then the gear has slipped on the motor. This is a common occurrence as both of these are made of plastic material.

Posted on Mar 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

1998 Rav 4 power windows.. Front Passenger window will not roll up from master or passenger side. No noise, need new motor


Each system is bad. The windows need regulators(they come with motors) the radio probably died(check fuse). And the mirror switch is bad(Since you still have power to the drivers window).

Oct 21, 2014 | 1998 Toyota RAV4

1 Answer

1995 Ford Taurus front passenger window went down and won't roll up


Remove the switch panel and check to see there is 12V power there.. If there is Push the switch and see if the power comes out of it to drive the motor, if the power is not present check the wire back looking for the short.. usually if the power is missing none of the windows will work. look where the wires come out the door post to the door. look at fuses, If there is power and it does not come through the switch when you push the switch. the switch might be bad. in which case jump the switch to roll window up and buy a new switch (rock auto.com) if you apply 12v power and the window still will not go up.. you will need to replace the motor. not a hard job. you must remove door panel and remove regulator and motor and replace and reinstall. either junk yard part, craigslist part or new at Rock auto.. Post a comment and let us know what happens.

Aug 19, 2014 | 1995 Ford Taurus

1 Answer

Putting window back on track gmc jimmy passenger front window


some of them run with a wire this my have corroded and snaped take of door panel and check this

Aug 24, 2012 | Cars & Trucks

1 Answer

The front passenger window wont go up or down. How do i fix this?


Have to remove the door panel & replace a broken
window regulator

Jun 21, 2012 | 2003 Chevrolet Tahoe

3 Answers

Passenger window will not go up i think its


if the fuse was an issue then all the windows would be inop, not just one, the most common fault is the electric motor that runs the window up and down.

Oct 03, 2009 | 2003 Ford Expedition

1 Answer

04 taurus Power Windows, passanger side goes down, not up, new mo


It is most likely the switch itself. since the down works that means that there is power going to the switch. So, the up position switch is probably worn out.

Jul 23, 2009 | 2004 Ford Taurus

1 Answer

My rear passenger window won't roll down.


definatly no fuse try and swap the rear window swithes over and see if the other window works with that switch but my guess is that it is the regulator in the door not the motor ,that is the cablr that the motor wind up and down open the door cover and have a look at it

May 16, 2009 | 1995 Mitsubishi Galant

1 Answer

Power window not working, motor and electric good, whats wrong?


Well either the gears aunt lined up correctly or the motor old and tired. Doesn't have enough power/torque to spin gears. might just need a new motor.

Apr 26, 2009 | 1991 Ford Explorer

2 Answers

Passenger side front and back window not working.


Once those cables break, the window regulator is history.
Cheapest way is junkyard regulators.

Jun 05, 2008 | 1996 Isuzu Rodeo

Not finding what you are looking for?
2002 Chrysler Town & Country Logo

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...