Question about Hyundai Motor 2004 Sonata

1 Answer

Bumper cover loose - Hyundai Motor 2004 Sonata

Posted by on

  • Anonymous Mar 22, 2011

    What is the question ?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,280 Answers

Why is it loose? Have you looked at it? Was the vehicle involved in a collision? Have you determined WHERE it's loose? Perhaps some fasteners are missing... suppose?
Think you might get someone experienced with automobiles to look at it... Since I cannot, obviously, SEE it for myself?

Posted on Mar 26, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The rear bumper cover came off how can I reinstall it


2000 Toyota Sienna rear Bumper cover replacement (1998 ...

? 3:40
https://www.youtube.com/watch?v=AY1BBdg3q74
Sep 20, 2013 - Uploaded by SergSpace
2000 Toyota Sienna rear Bumper cover replacement (1998-2003) .... Automotive Bumper Repair Specialist- How to repairyour plastic bumper cover ... Toyota Sienna Rear Shock Installation 2003, 2004, 2005, 2006 - Duration: ... 2015 Toyota Sienna XLE - Duration: 28:13. by MikesCarInfo 35,234 views.

Fixing My Mom's Prius: Loose Rear Bumper Cover - YouTube




Nov 29, 2015 | 2005 Toyota Sienna LE

1 Answer

Where can I get front bumper cover clips for my 2005 Chrysler Sebring sedan?


Check your local wrecking yards. If you cant find them there then go to a dealer.

Sep 17, 2012 | 2005 Chrysler Sebring Sedan

1 Answer

How to replace front bumper cover



Instructions

Engage the emergency parking brake, to avoid causing the car to roll or move when removing the bumper.

Release the screws holding the wheel well liners in place with a screwdriver. This will expose the screws holding the bumper bolts. Release the bolts holding the bumper in place, using a wrench, and have a friend support it while it remains wired to the car.

Disconnect the wiring running to the bumper to separate the fog lights from the car. Pull out the light fixtures from the bumper cover.

Remove the grill in the bumper cover, taking out the screws holding it into the cover. This will allow you to separate the grill and the bumper cover.

Secure the grill and light fixtures into the new bumper cover, using the hardware you removed from the old cover.

Reconnect the necessary wiring. Support the bumper cover in front of your car or have your friend hold it in place again.

Secure the bumper cover using the retaining bolts you took out earlier. Tighten the bolts to hold the bumper cover securely against the car.

Replace the wheel well liners with the screws you took out.


Jul 07, 2012 | 2006 Chrysler Pacifica

1 Answer

How do I replace a tail light assembly on a 2007 toyota camry?


I tried to search all over the places on internet but to no avail. So did it on my own and the result was successful.

I replaced the passenger side rear tail light assembly of my Toyota Camry 2007. The method is same for the late models till 2011 no matter what the side is.

Its very easy to unscrew 3 nuts inside the trunk after removing the only portion of cover that covers the light but this is not it, there is a bracket under the light assembly which actually holds the edge of bumper and in order to pull it out of the bumper, bumper has to be partially taken out or loosen out.
To began the process I took the wheel out to unscrew 2 screws located right behind the wheel on the lining of bumper cover holding the mud flapper at the same time, if you have small philips screw driver of approx 2" length you might not need to remove the entire wheel. please see the image 1 as I took the pictures while fixing the light up and that too all alone.

10_14_2011_1_06_33_am.jpg
There are 2 more screws to be taken out one holds the flap and other holds the bumper cover, all need to be taken out to bring the flap apart.

10_14_2011_1_19_48_am.jpg
Now there is a most critical and important part for the entire job, after loosing the screws and after pulling the flap down there is a hidden bolt which will come with small sized socket (usually available in basic socket set kit)


10_14_2011_1_25_17_am.jpg

Loose the bolt like this.
10_14_2011_1_27_20_am.jpg

Now just hold the loose side of the bumper cover and pull it out towards yourself, that particular cover side will easily come off.

You need to loose another screw hiding in the cover right behind the bumper, open the cover with a help of the plain flat screw driver and take the bolt out.




10_14_2011_1_33_32_am.jpg

You have just loosen the edge of bumper cover holding the bracket of light, just pull the light towards you while facing it (do not forget to unplug the power supply sockets as in next image) bend it little to the top and slide the bracket out of the bumper cover edge and you got the light assembly out in your hand.







10_14_2011_1_51_50_am.jpg

Disconnect or unplug the power supply from the sockets, just press the plastic tip and pull the plug out from the light socket, if you just forget the order don't worry, the gray will go in gray and black one in black (please do this in the very first stage as i forgot to put this in a beginning)


10_14_2011_1_52_18_am.jpg

Now hold the new assembly, slide it's bracket in the bumper cover edge (the way it was taken off) slide the light carefully as there is a round shape plastic part in the body needs to hold the corner edge of the light assembly


10_14_2011_1_56_35_am.jpg

Put the 3 nuts back on the light bolts from inside the trunk.




10_14_2011_2_00_13_am.jpg


Attach the power sockets.

Push the snapped out side edge of the bumper cover back to its framing, the click sounds will confirm its proper attachment now put all the screws back in a same way they were taken out but don't forget to putting back the mud flap.


10_14_2011_2_05_52_am.jpg10_14_2011_2_06_20_am.jpg


10_14_2011_2_09_05_am.jpg

At the final stage, just mount back moldings from inside the trunk, please refer to the images, there are 2 bolts and rest clip in typed sockets, sometimes while snapping the moldings out the white male female clips remain in their housings, just take them out with hand or screw driver and put them back carefully back to the plastic molding before tucking them back


10_14_2011_2_15_52_am.jpg


10_14_2011_2_17_16_am.jpg




10_14_2011_2_20_04_am.jpg10_14_2011_2_20_24_am.jpg


10_14_2011_2_24_16_am.jpg

Hope this will help you guys out !

This entire process was done without any help of trained or professional, please handle the task by keeping maximum safety precautions and at your own risk :)

Faiz.

Sep 10, 2010 | 2007 Toyota Camry

1 Answer

One side of front bumper cover is hanging down on my 98 handa


You should remove the bumper cover and take a look and make sure that the cover is not broken, its all plastic and the hold down arms sometimes break off and bumper will hang, also look for missing or loose fastners,

May 28, 2010 | 1998 Honda Civic

1 Answer

How to replace the rear bumper cover on a Chrysler Pacifica


1. Open liftgate. 2. Remove both taillight assemblies by removing 2 hex-head bolts located in the area revealed when the liftgate is opened. 3. Remove 4 plastic retainers on the very bottom of the bumper cover in the rear. 4. Remove 2 phillips head screws in the wheel well rear lip. 5. Remove 4 pop-up plastic retainers in liftgate area. Use two screw drivers to lift the head and then pull the entire retainer out. 6. Remove a hex-head bolt from each side in the area revealed when the taillight assembly was removed. 7. Bend the bumper cover outward on each side to clear the wheel well lip and remove the bumper. Have a blanket or carpet on the ground to protect the bumper. 8. Remove metal clips from tabs that connect the upper bumper cover to the lower bumper cover. 9. Drill out pop-rivets that connect upper bumper cover to lower bumper cover. 10. Push tabs out of slots to separate the upper and lower bumper covers. 11. Release tab locks on chrome trim pieces and remove from upper bumper cover. 12. Reverse this process to replace the bumper cover.

Feb 16, 2010 | 2006 Chrysler Pacifica

1 Answer

2004 Buick Rainier front bumper cover popped loose (due to catching on snow from recent storm). How to I reconnect the sides of the bumper cover? (it is still attached in the center at the license plate)


youll have to kake sure that the fasteners are still in good condition if so pull the bumper around to where it should be and align the fasteners or the screws .if its fasteners youll have to push the fasteners into the slot on the bumper if its screws youll have to retighten them so that they are snug. happy motoring.

Dec 24, 2009 | 2004 Buick Rainier

2 Answers

2007 buick lucerne has water leaking into the spare tire wheel well. please advise


Remove trunk trim and covers , close trunk and wet car now look for leak source.

Jun 16, 2009 | 2007 Buick Lucerne CXS Sedan

1 Answer

Rear bumper cover is loose on one side


The sides of the bumper slide on over a large pin to hold them in place. The easiest and correct way of getting it back on is to unbolt the bumper cover from the impact absorbers in the rear and slide the cover off by pulling it straight back. When you slide it back on, make sure the cover goes on the pins on each side before pushing it all the way back in place and bolting it back up to the impact absorbers. If you have been rear-ended then the tracks that these pins slide into may be broken. If thats the case you will have to replace the bumper cover

Mar 25, 2009 | 1995 Ford Taurus

1 Answer

Need to replace the front bumper cover on a 1995 ford escort


its just the bumper cover.. once you buy the bumper cover it will replace your broke one,, however you my need to buy a bumpercover support..i think its only about $30 more..good luck keith...

Mar 15, 2009 | 1995 Ford Escort

Not finding what you are looking for?
Hyundai Motor 2004 Sonata Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...