Question about 1992 Buick Regal

1 Answer

92 regal trouble removing the rear rotor

92 regal trouble removing the rear rotor

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Spray some penetrating lubricant around all the edges of the rotor (front and back), give it about 25-30 minutes to soak in, and then go to town on it with a hammer banging on one side and then the other (North south, East west, South east north west etc)

Posted on Mar 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing rear rotors on a 2004suzuki verona


this is covered in the FSM, buy one.
or log in to alldata.com
or suzuki pit stop plug (google them )
read the brake chapter?
same as the front, it is, so never done brakes before, is that it?
the only uniqueness is step4
all steps work on most cars until step 4.

  1. jack it up, use stands
  2. wheel off
  3. calipers off, and tied up per FSM (they unbolt.....)
  4. remove secret bolt at rotor center. see it? at 7PM
  5. the plug at 11am , is for inserting a 8mm screw to force off stuborn rotor, seen on most suzuki's 92 to now.l
  6. now remove rotor.


2bd852d6-a247-43dd-9473-382f9317ba01.jpg

Oct 12, 2014 | 2004 Suzuki Verona

2 Answers

Searching for cild lock location 92 buick regal?


look on the door by the latch mechanism

Oct 18, 2012 | 1992 Buick Regal

1 Answer

92 buick regal dies after warms up


Have you determined if it is loosing spark when it dies ?
Any check engine trouble codes ?

Jul 10, 2012 | 1994 Buick Regal Gran Sport

2 Answers

92 buick regal gran sport replacing harmonic balancer having trouble getting the retaining bolt off can you help me


if you don't have a 1/2 impact gun, then take a breaker bar and socket, and lock the breaker bar under the passenger side rail and use the engine starter to brake the bolt lose. be careful !!

Apr 17, 2011 | 1992 Buick Regal

1 Answer

How to remove front rotor on 92 lincoln town car


92 is rear wheel drive so it is pretty staight forward. Jack up vehicle and block up then remove the wheel.Then remove the front brake calibur which is usually held on with two bolts from the backside of it.Now remove the dust cover from the rotor,you will see a cotter pin,remove it,then remove the nut.After this the rotor should slide off!

Aug 05, 2010 | Lincoln Town Car Cars & Trucks

1 Answer

Having trouble removing rear disc brake rotor fron


This vehical has drum styal park brake shoes on the inside of the brake rotor so make sure the park brake isn't set and you can turn the rotor. If you can't turn the rotor you will have to look into this first if the park brake is set or sticking you won't get the rotor off if thats ok try spray with penting oil helps a little. I use a 4 or 5 lb sluge hammer and hit the rotor kinds close to the wheel studs about 5 times then hit the outer edge from the back side also works on the outerside. Don't be afread to hit hard I never broke one.

Jun 26, 2010 | 2005 Toyota Highlander

2 Answers

How do I manually open the hood of a 92 Buick Regal


REMOVE THE PLASTIC COVER BETWEEN THE BUMPER & ENGINE FRAME. THEN REACH UP TO THE LATCH &PRESS UNTIL IT POPS OPENED.

Feb 07, 2010 | 1992 Buick Regal

1 Answer

Manual lock out hubs on 92 ford ranger, cant get the rotor to come off


Have you removed the nut holding the rotor on? Remove the big nut holding the bearing in, and the rotor will come off. You will still need to knock out the rear bearing and seal.

Aug 09, 2009 | 1992 Ford Ranger

1 Answer

1996 buick regal 3.8L. Rear brakes loud thumping


Check for leaks in the brake lines and calipers or brake cylinders. If leaking have it repaired right away its not safe. Change the brake fluid, take the old fluid out add new fluid or have it professionally done.

May 13, 2009 | 1996 Buick Regal Olympic Gold

1 Answer

Rear brake not working on Buick Regal 2004


open the bleeder with someones foot on the pedal. If brake fluid sprays out, replace the caliper. If fluid doesn't spray out, replace the brake hose.

Mar 15, 2009 | 2004 Buick Regal

Not finding what you are looking for?
1992 Buick Regal Logo

Related Topics:

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...