Question about Suzuki Aerio

1 Answer

Transponder key Hello again .I have bought a new transponder key for my suzuki baleno and without incurring expensive transportation costs to get to dealership ,it wont start .Someone suggested I remove the reader coil. Its supposedly very simple .Is this a good idea and how do you do it? Thanks

Posted by on

  • novachaser Aug 04, 2008

    Hi Thanks for reply . I still have the old key ,well half of it anyway, as the other piece broke on the floor somewhere, And yes I did buy the new one from the dealership. They conveniently forgot to tell me that the car had to be at the garage to be transponded.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

Ex my honda civic had a transponder key at one time, but some body cut the wires behind it and it still runs. what happend to the old key and did you buy this one at the dealership?

Posted on Aug 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to know if you have a way to replace an ignition key without replacing ignition switch


Yes. Try dealership first. They will need region, vin no and proof you own car and they should be able to order one. Bit expensive but sometimes going through a locksmith can be hut and miss, especially if you have a transponder in the key. Dealer is the best way from my experience.

Jun 26, 2016 | Cars & Trucks

1 Answer

Saab 2003 key not recognized how to by pass to get it started


There's an antenna for the transponder receiver built into the key surround on the 9-5, it could have had a knock or be faulty.

On the 9-5 if the transponder stops working and you get a key not accepted message then you can override it by pushing the unlock button on the key remote with the ignition turned to on and it should let you start the car.

May 26, 2016 | Saab Cars & Trucks

1 Answer

How toprogramm car key toyota matrix


  • 1 First you will need to purchase a blank Toyota transponder key. You can do this from the dealership, a locksmith, or an online source such as eBay. Once you have the key, take the blank key and the master key to a locksmith that he or she can duplicate the key. This will be much cheaper than the dealership.
  • 2 Now that you have the newly cut key and the master key, you can program the Toyota transponder key. Sit in the driver's side of the Toyota vehicle. Press and release the brake and gas pedal simultaneously.
  • 3 Insert the master transponder key. Do not turn it. Push and release the gas pedal 5 times within at least 15 seconds of inserting the master key.
  • 4 Press and release the brake pedal 6 times within 20 seconds of completing step 3, then remove the master transponder key.
  • 5 Insert the newly cut transponder key into the ignition, but do not turn. Press the gas pedal once.
  • 6 Wait up to 2 minutes or whenever the security light on the dashboard turns off. Once the light goes off, remove the new transponder key and press the brake pedal once. The new transponder key should now be programmed. Test the key by attempting to start the engine. If the engine does not start, repeat the steps above.
  • Mar 02, 2015 | 2010 Toyota Matrix

    1 Answer

    Lost keys for ignition


    hello,you need to seek your local vehicle locksmith,who will cut and reprogram the new key to your vehicle,or the other choice may be transporting your vehicle to the main dealership,and instruct them to carry out all necessary work,(ordering replacements from the main suppliers,and then re coding to your vehicle) though the 2nd choice may well end up quite expensive,but do ring around for the best quote .hope that helps, cheers.

    Jun 25, 2014 | 1999 Ford Expedition

    1 Answer

    Transponder key programing


    the operators guides in the glove box answers all this.
    lost that?
    ask your suzuki dealer for that,

    Mar 23, 2014 | 2005 Suzuki Baleno

    1 Answer

    Baleno not starting


    let him fix it, or find a new mechanic,
    here in USA , any ASE mech can to that.
    i do not understand those facts above.
    did not and self
    nor key.
    seem it is 2 problems.
    engine dont run right.?
    and
    the Immobilizer is bad?

    May 30, 2013 | 2005 Suzuki Baleno

    1 Answer

    I lost my keys and have two new ones just wondering how i program them to my vehicle without going to dealership?


    If you don't have an original key you are out of luck and will have to go to a dealership or locksmith to get them programed. If you still have one of your original keys you can reprogram the new ones yourself. Follow this link if you still have an old key.

    http://www.ehow.com/how_5029209_program-chevy-transponder-chip-key.html

    Feb 24, 2011 | Chevrolet Malibu Cars & Trucks

    1 Answer

    Key signal


    UNLESS YOU HAVE WARRANTY LEFT,IT'S UP TO YOU FOR REPAIR COST..THE WIRELESS CONTROL MODULE THAT CHECKS FOR THE PROPER KEY SIGNAL MAY HAVE FAILED OR YOUR KEY TRANSPONDER MAY BE DEFECTIVE..ANYTHING ELECTRONIC TODAY IS EXPENSIVE TO REPAIR

    Jun 19, 2009 | 2006 Dodge Charger

    4 Answers

    Chip key


    You can go to ebay and get a transporter key for about $10 shipped to your door. Take it to a hardware store to have it keyed or a locksmith if you know a good one. Next follow the instructions that come with the key. I just bought a Venture cheap and it had only one key. The dealers and everyone else want $60 or more.

    Jan 15, 2009 | 2000 Chevrolet Venture

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    478 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Suzuki Experts

    yadayada
    yadayada

    Level 3 Expert

    63990 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21990 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6812 Answers

    Are you a Suzuki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...