Question about 2001 Chrysler PT Cruiser

1 Answer

My ptcruiser will not star.My ignition coil pack will only fire on 1and4 2and3 will not fire. I put a new coilpack and a new camsensor and a new cranksensor and it will not star.It a 2001 pt cruiser with a 2.4liter engine.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 878 Answers

Make sure the firing order is correct cause if not it will not start,you can go to local part store they give for free

Posted on Mar 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

05ccherokee coilpack diagram


Hi. The Coil Pack Retrofit (CPR) allows the use of 'coil on plug' individual ignition coils on engines with distributor based ignition systems and D, B, F and H series engines. You can also visit https://www.reliable-store.com and download the manual for better understanding. It has all the information along with the diagrams. Good day!

Mar 21, 2018 | Cars & Trucks

2 Answers

How do i put new coilpacks on my 2003 trailblazer?


Hello Deborah,

Place a spark tester on your coil lead to test for spark.

If you have fuel pressure, reasonable compression and a spark your engine should at least try to start.

Why did you replace the coil packs in the first place? and did your vehicle run before the swap?

Jul 22, 2017 | 2003 Chevrolet TrailBlazer

1 Answer

How do I fix a spark plug that's not firing on a 2004 ford mustang


If its not firing i would check your coils pack thats where your spark comes from so if there is none the coilpack or packs have probably burned up. or it could be a burnt out plug try the cheepest first plug if no spark coils will need to be checked .. easy to do. remove a or that plug not firing put it in the wire and ground it out on engine while someone turns it over if you see spark it should be blue orange is bad if you see none then plug is bad use a good one try again if still no spark coil pack.

Mar 03, 2016 | Ford Cars & Trucks

1 Answer

Why the 3&4 plug not firing third coilpack so I know it not that


Either the plug wires are worn or the plugs themselves.
What are your resistance readings on the coil packs & ignition wires? What condition are the spark plugs in?

Mar 03, 2015 | Cars & Trucks

1 Answer

No fire from #3 & #6 coilpack have replaced coilpack cranksensor camsensor


Year, make, model, and engine size?

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Apr 09, 2013 | Cars & Trucks

1 Answer

Not getting spark in #1 & #4 cylinder


Since both one and 4 are fired using the same coilpack if the location of the coilpack is easy to get to you can swap it with the 3/2 coil pack and see if the miss moves to 3/2 thus eliminating the ignition module and related circuits and confirming the coil is faulty

Dec 11, 2012 | 2000 Chevrolet Cavalier

2 Answers

2000 subaru forester ignition coil wiring


Are there any other possible problems, or you are just not receiving spark at all now?

The coilpack could be dead and just need replaced. If you have a voltmeter or a test light, check the wiring on both sides of the coilpack harness to make sure it is receiving power.
I don't believe Subaru used ignitors past '99, but if they did, your should be located on the firewall behind the throttle body. Make sure it's plugged in and receiving power.

Coil packs do go bad from time to time. I had to replace mine in my
'98 Impreza a while back.

Goodluck!

Mar 15, 2010 | 2000 Subaru Forester

2 Answers

96 dodge caravan wont fire on cylinder 1 or 4. coil pack is good. fuses are good. just no spark


check pulse on coil pack conector with noid light ,remember cylinders 1&4 fire at the same time. check pulse while cranking. most likely you have a bad computor or a broken wire

Feb 25, 2010 | 1996 Dodge Caravan

1 Answer

One coil pack is not firing at all


i would change the ignition module, test for a strobing ground to the coil thats not firing, and also check for key on power constantly at the coil if you are missing the ground your module is bad please rate and let me know if this helps -jeff

Sep 01, 2008 | 1999 Buick LeSabre

Not finding what you are looking for?
2001 Chrysler PT Cruiser Logo

383 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...