Question about 1997 Pontiac Sunfire

1 Answer

Need to find out how to replace the license plate bulbs, cant get to them

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 40 Answers

You must first remove the trunk door fascia. That is the plastic panel on the inside of your trunk. There should be about 6 screws on the inside that hold that. Once that is off you should be able to get to the bulbs from there.

Posted on Mar 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 license plate bulb


Use a screwdriver in the recess on the plate light. Pry out the light unit. Release bulb from the contact spring. Install the bulb using a reversal of the removal procedure. Make the tension of the contact springs sufficient to hold the bulb firmly.---------------------------------------------------------------------------------------------
Renault CAN Clip V124

Jan 15, 2013 | 2001 Ford Windstar

1 Answer

I need to know how to replace the license plate bulb on a scion xa


Email Chris Bacon here: www.autolumination.com
*License Plate Light Bulb Size: 168
I buy all of my bulbs there.

Sep 09, 2012 | 2006 Scion xA

1 Answer

How to replace License Plate Bulb '96 Jeep Grand Cherokee Limited


Hi Timmy:

Check this procedure from Repair manual...


LICENSE PLATE LAMP - REMOVAL
(1) Remove screws and license plate lamp visor from liftgate (Fig. 10).
(2) Remove bulb from lamp socket.

INSTALLATION
(1) Install a bulb in lamp socket.
(2) Position license plate lamp visor on liftgate and install screws (Fig 10).


4_28_2012_5_22_57_pm.jpg


Hope this helps.

Apr 28, 2012 | 1996 Jeep Grand Cherokee

1 Answer

Need to replace bulbs that lights license plate. License plate and light is part of trunk


raise trunk lid look on the inside behind your license plate light there should be access to the bulb there. You will see the wires going in to the bulb there will either be a flt plate that can be removed to access bulb or where the wires enter there will be a round socket that you can twist counter clockwise and remove the bulb socket for bulb replacement. hope this helps.

Jan 15, 2011 | 2003 Lincoln Town Car

1 Answer

I need to replace the bulbs above the license plate on my 2002 eldorado how do you replace them....get at the old bulbs


Hello: Remove the license plate, then remove the screws on the chrome piece behind the license plate and the you can access the bulbs.

Nov 24, 2010 | 1999 Cadillac Eldorado

1 Answer

Replace license plate bulb.


You need to pull the cover of the bulb off, There may be a clip it may need help from a screwdriver. Replace the bulb and replace the cover

Jul 05, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

2001 LeSabre - replace rear license light. The rear license plate lights do not light up the license at night. How do you get to them? What size bulb do you need?


kind of tricky, took me an hour to get it figured out, but you got to open the trunk and take out the 10 or so 10mm nuts sticking out of the backside of the lid, then the whole solid piece where the lights are on the back will slide off, then you can change the bulbs above the license plate and put it all back together, im cant remember off hand the bulb size, but your local auto parts store will have that info when you go to buy them

Mar 05, 2010 | 2001 Buick LeSabre

1 Answer

License plate bulb needs replacing


Remove license plate. Unscrew the screws on the underside of the bumper. Slide the lights back toward the trunk and then down through the opening. Unscrew bulb and replace with a new one.

Reverse steps to reinstall the lights.

Feb 06, 2010 | 2003 Chevrolet Impala

1 Answer

1999 Dodge Neon rear license Plate bulb


LICENSE PLATE LAMP BULB
REMOVAL
  1. Remove screws attaching license plate lamp to rear bumper
  2. Remove lamp from bumper.
  3. Remove bulb socket from lamp.
  4. Pull bulb from socket.

INSTALLATION
  1. Install bulb into socket.
  2. Install bulb socket into lamp.
  3. Place lamp in position.
  4. Install screws attaching license plate lamp to rear bumper.

Oct 08, 2009 | 1999 Dodge Neon

1 Answer

2002 license plate bulbs


its real simple look at the license plates then look up you will see 2 screw per lamp / unscrew them and slide remove its a 194 bulb so get some ready then replace and put back / Please rate my response thank you very much

Feb 01, 2009 | 2002 Toyota Avalon

Not finding what you are looking for?
1997 Pontiac Sunfire Logo

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...