Question about 1991 Ford Festiva

1 Answer

Do you have to take the motor out to change the front crank seal in a 91 ford festiva?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 33 Answers

It would be easier but you can probably get away with loosening the engine mounts and letting the engine drop a little bit to gain acsess to the seal easier...

Posted on Mar 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my ford festiva is misfiring


It could be a few different things. Bad plugs, bad plug wires, dirty rotor/distributor cap, or a vacuum line that isn't working properly to name a few to start with. I'm wrenching on a 91 Festiva right now as well... Let me know what you've come up with so far and I will see what I can do to help.

Jun 10, 2014 | 1991 Ford Festiva

1 Answer

Steering problems in 91 ford festiva.


Sounds like lower control arm is lose. Either ball joint or tierod end are bad or not tight. Check nut for tightness. If tight jack front of car up and shake tire up down left right. That will show you whats lose

Jan 23, 2013 | Ford Festiva Cars & Trucks

3 Answers

1989 Ford Festiva oil leak near the crank what do i do?


The rear main seal is out.you have to pull the engine or move the transmission back or out. Personally if you can not do the job yourself it can be expensive. I would find another car to buy.

Apr 19, 2017 | 1993 Ford Festiva

1 Answer

Is the crank pulley pressed on crank for a 93 ford festiva


remove the large bolt at the center of the crank pully and the bolts on the smaller pully and the warer pump pully put jack under oil pan, remove front upper engine mount and lower the jack this will allow you to remove the timing belt cover and then pry off the pully with a large screw driver

Apr 25, 2011 | 1993 Ford Festiva

1 Answer

1988-1993 ford festiva leaking oil around the crank pulley... could the oil be coming out of timing chain seal... are could it be a the seal on the crank shaft.. if so would i need to removle the engine to...


This sounds like the crank seal, the engine doesnt have to be removed, in order to get to seal is like replacing the ttiming belt, and once in the timing belt i would replace the crank and cam seals, also do the timing belt, and maybe the waterpump, you will need to remove the crank pulley and then the timing covers then align timing marks for timing belt before ou remove it, with timing belt off the crank pulley then slides off the crankshaft and the seal is behind it, the cam shaft gear unbolts and the seal is behind the gear, once the gears are off then you will be able to remove the seals from the engine,heres a few diagrams to help. good luck and i hope this is helpful,60d826b.gifca916fa.gifcb2cb5a.gif

Oct 31, 2010 | 1993 Ford Festiva

1 Answer

I have park lights & tail lights but no HEAD LIGHTS,91 ford festiva please help.


check/replace the headlight switch also check the dimmer switch under the column it could be bad too

Jan 20, 2010 | 1991 Ford Festiva

1 Answer

91 FORD FESTIVA LIFTER ADJUSTMENT


No, they are hydrolic lash/lifters, no adjustment.

Oct 28, 2008 | 1993 Ford Festiva

1 Answer

Change ford festiva front light bulb


Hello, the front light bulbs are easily changed by twisting the plastic holder in the back of the lamp that holds the bulb counter-clockwise. You turn it about a 1/4 turn and then it pulls out and you can switch bulbs. Do not touch the new bulb with your fingers because oil from your fingers will cause the bulb to burn out quickly.

Oct 20, 2008 | 1993 Ford Festiva

1 Answer

Motor change


Do you know what codes he is referring to? I have never heard that one before.

May 21, 2008 | 1992 Ford Festiva

Not finding what you are looking for?
1991 Ford Festiva Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...