Question about Chevrolet Suburban 1500

1 Answer

Tail lights not working. fuses look good, brake lights work, hazards work, but running lights don't

Posted by on

  • 3 more comments 
  • Anonymous Sep 05, 2008

    tail light tag light side marker light not working

  • Anonymous Sep 24, 2008

    Same damn problem

  • Danib820 Nov 15, 2008

    All lights working except rear running lights (tail lights) and license plate lights. Replace all 6 bulbs, replace Tail Lamp Circuit Boards (both sides). All fuses are good. Still doesn't work.

  • emma314 Jan 24, 2009

    Brake lights are out... I replaced all the bulbs and the fuses look fine. Relay problem?

  • Anonymous May 02, 2009

    All lights working except rear running lights (tail lights) and license plate lights. Replace all 6 bulbs, . All fuses are good.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Tail lights working fine, signal lights work brake lights do not come on when brake is applied

Posted on Jan 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you find short from fuse box on 99 Cadillac Deville works the tail lights, hazard, headlights, blinkers, cruise, brake lights, coolant fans?? All fuses checked good.


Hi Mary ANN , need some clarification ,the fuse's for all these thing's you have listed , the tail lights, hazard, headlights, blinkers, cruise, brake lights, coolant fans are good ? If good what makes you think you have a short ? Explain ! Are these thing's not working ? That wouldn't mean you have a short . You could have a bad ignition switch !

Oct 19, 2015 | Cadillac Cars & Trucks

2 Answers

Subaru outback wagon tail light not working off


There are several components of your 1997 Subaru Outback that can cause your tail lights to stop functioning correctly. To help pinpoint the cause of the problem, it would be very helpful to also check your front marker lights. If the marker lights are working, then we know that the problem is not the headlamp switch or the tail and illumination relay (located in the fuse and relay box).

The components to check are:

> Fuse #23 (20 Amp) in the Main Fuse Box.
> Fuse #5 (10 Amp) in the Fuse and Relay Box
> Tail And Illumination Relay
> Headlamp Switch

May 06, 2012 | 1997 Subaru Outback

1 Answer

No turn signals,brake lights. have tails lights. all fuses in fuse box under check out ok


The turn signals and the brake lights go through the hazard switch. Try cycling it a few times and see if that solves the problem. If the fuses are good and the 4way's don't work, I would suspect that switch.

Sep 21, 2011 | 1994 GMC Suburban

1 Answer

Tail lights not working. fuses look good, brake lights work, hazards work, but running lights don't- gmc sierra 2500


do the front marker/park lights work if not you could have a bad light switch on the tail light side of the switch.you need to check the brown wire at the back of the truck in the wiring harness as this is the tail light wire that feeds the bulbs.if you have power there then you will have to check for power at the socket,if no power at the socket but were you check the wire then there is a problem between the two that you will have to check out.if there is no power when checking the wire then you will have to check for lose of power between the switch and rear wiring.make sure the fuse is good by using a test light and not by looking as sometimes they look good but don`t work.

Jul 11, 2011 | GMC Sierra 2500 Cars & Trucks

3 Answers

98 town car my brake lights both turn signals work my hazards work, but my running tail lights don't work


Hello,

Inside your instrument fuse panel look for fuse #31 which powers up the light control module and the main light switch, also while there be sure and check fuses 1, 3, 5, 7, and 9 to be sure they're not blown.

Good luck!

Let me know if this helps.

Rodney

Jun 14, 2011 | Lincoln Town Car Cars & Trucks

1 Answer

87 celica. tail lights do not work, but brake and others do


Check the tail light failure sensor. Located in the driver's side kick panel fuse box. ~Rick89GTS

Jan 06, 2010 | 1987 Toyota Celica

1 Answer

Left side brake and hazard lights don"t work


sounds like a bad turn signal switch, wiggle it , just a little bit,... see if some of the lights start to work. do your turn lights work correctly??

Dec 02, 2008 | 2000 Chevrolet Lumina

3 Answers

Tail lights and brake lights not working - not fuse - what can it be?


Brake light switch, located on upper brake pedal should be checked, that is most likely your brake light issue, but U say tail lights aren't working, but running lights do, tail lights and running lights I would consider to be the same, so can u clarify that for me? Let me know how the u do w/ brake light switch, and if u have issue w/ tail lights?

Nov 01, 2008 | 1994 Ford Thunderbird

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,425 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...