Question about Chrysler Voyager

1 Answer

When cold my 2.8crd 05 plate voyager makes a noise when first moving off its when its changing up the gear but does not appear to do it after the first change up, its been like this for 3 days and noe the orange eninge light has come on.. any ideas

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert whose answer got voted for 20 times.

  • Expert
  • 178 Answers

Firs check the codes using a scanner some auto parts stores do it at no cost as it may not have anything to do with it i say this because i had the similar problem but the light never came on and the shifting was perfect but the noise was thereat first when cold then all the time even after i serviced the transmission so i took the chance and replace the module is located in the transmission body under the battery bracket this was recommended to me by a transmission expert the original had 2 gaskets and a aluminum plate in between the one i put on had only 1 gasket no plate he said it was the same but improved part it worked so there was a second time on a different van i work as a mechanic and this time i didn't service the transmission just went strait to the same part and it worked also i can not tell how much the part cost the guy trade it for some of my work i hope this gives you an idea but wont hurt to make sure rise the front wheels and put it on gear i use a hose to hear where the noise is coming from put one end close to my ear and the other in the place i thin the noise is please let me know if this helps thank you

Posted on Mar 22, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 1998 Plymouth Voyager. It has an automatic transmission. It will go forward ok, but when I try to backup the transmission squeals like its slipping and the van won’t move. Any advice will be...

The reverse plates in the transmission are burned up. There's a coating on the plates that cause them to catch on each other and the gears to function correctly. In your case for some reason the coating has come off and the plates are slipping causing the squeal.

Nov 16, 2017 | 1998 Plymouth Voyager

1 Answer

My wife has a Peugot 307 petrol engine. When pulling off from cold, there is a grinding / grating noise. It only occurs when the car is moving and lasts 1 to 2 minutes. Dip the clutch and the noise...

Sticking clutch throw-out bearing arm or linkage/cable, or pedal, so that throw-out bearing is just barely and intermittently touching the throw-out plate of the clutch. Depressing the pedal slightly engages the bearing to the plate causing positive drive of the bearing, quieting the noise. After running a while, the bearing moves sufficient distance to disengage. Next time it happens, with the vehicle stopped, in neutral and with the parking brake set, stick your toes under the clutch pedal and pull it back, see if the noise stops or changes..

Sep 07, 2017 | Peugeot 307 Cars & Trucks

1 Answer

I have a Toyota Corolla AE 100 manual gear shift gets stuck

why my 2006 corolla car gearbox is stuck in third gear and cannot move

May 29, 2010 | 1991 Toyota Corolla

1 Answer

My son has a 77 ford f150 will not go into gear

It sounds like the pressure plate is not disengaging the clutch completly, if at all. If it makes a grinding
noise when you step on the clutch,( without moving
the shifter from neutral) you most likly have bad
throwout bearing or pressure plate or both. If no
noise try adjusting the clutch. Under the truck, on the
left side there is a 3/8" rod from the clutch pivot assy.
to the clutch fork. Remove the return spring and turn
the rod toword the fork until the bearing touchs the
the plate replace the spring and back the rod off
1 +1/2 turns. While your under ther remove the inspection plate and check for shrapnal, also have
somone step on the clutch and see if everything is
moving.(eng. is off while doing all this. had to say it)
Start the truck and give it a try, if no improvment
you need a clutch job.
One more thing, with the truck on level surface and
the engine off, block the wheel and shift through the
gears, if it shifts easily ok. This was to eliminata
bent or broken shift forks in the transmission cover.
Hope this helps. Good luck.

Jan 26, 2010 | Ford F-150 Cars & Trucks

1 Answer

97 Ford Power Stroke, starting problem.

Does the starter engage the drive gear with the action of a solenoid? It may not be pushing (pulling) the gear far enough. There may be a slipping ring gear on the flex-plate. If you pull the starter again, you can try to see if the ring moves in and out or appears to be slipping around on the flex-plate. The flex plate could be loose on the crankshaft. In any case, the engine or the transmission would have to come out. Check the starter engagement before removing the torus and flex-plate.

Sep 14, 2009 | 2001 Ford Super Duty F 450

2 Answers


Clutch plate springs brocken.Thats where your noise is comming from.The only solution is to change the clutch.Hope that was helpfull.

Jul 24, 2009 | 1993 Toyota 4Runner

1 Answer

Noise in the gear box after changeing the oil

sounds like the drive plate on the back of the torque converter

Feb 19, 2009 | 2002 Ford Excursion

1 Answer


this sounds as if your drive shaft has failed, take to your nearest mechanic and have him verify this this should only cost about 200 euros to repair if it is the drivshaft.

Jan 22, 2009 | 2002 Chrysler Voyager

4 Answers

Chrysler voyager automatic transmission problem

Sounds like you have yourself a bad shift solenoid pack this is mounted on the front of the transmission under a thick rubber boot and has an 8 or 10mm bolt holding a plug into it, these usually fail hot as it is an electronically controlled solenoid and there are tiny little springs and magnets inside that can stick also while you are in there do yourself a favor and change the two speed sensors on the transmission they are about $22 each and can also cause the problem you are explaining. the shift solenoid pack is about $120 on ebay and some sellers actually sell them along with the input and output speed sensors you may try changing those first and see if it solves it but i have a feeling your solenoid pack is failing also when you change these parts it may take the computer a few trips to relearn shift points but you'll know it fixed it right off the bat.. please rate and good luck -jeff

Sep 01, 2008 | Chrysler Voyager Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides