Question about 2004 Pontiac Montana

1 Answer

WHY DOESN'T MY INTERIOR LIGHTS COME ON WHEN I USE MY REMOTE CONTROL OR EVEN WHEN I OPEN THE DOOR THEY WON'T TURN ON?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 65 Answers

Hello
I would check to see that the interior lights are not turned off , the switch that scrolls up and down next to the headlight switch might be turned all the way down if not you need to check the fuses
Good luck
Chris

Posted on Mar 22, 2011

  • irma gephart Mar 22, 2011

    Thank you for your solution! I will try your solution tomorrow. I will let you know if it worked. Thanks again.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't get dome lights on when door is opener even with override switch off?


The following lamps may be manually turned ON by placing the interior lamp switch in the ON position, or by opening a door while the switch is in the AUTO position.
?€¢
The dome lamp


?€¢
The liftgate lamps


?€¢
Courtesy/map lights

The courtesy lamp supply voltage circuit of the body control module (BCM) supplies battery positive voltage to the dome lamp, the liftgate lamps, and the map lamps. When any door is opened, the door jamb switch contacts close providing a door open input to the BCM. The BCM then provides a ground to the interior lamps with the switch in the AUTO position. The interior lamps receive a ground at G401 with the switch in the ON position.
Important: If the liftgate is opened after all the modules go to sleep, the dome light will not come on. The liftgate ajar switch input to the BCM will not wake up the BCM once it has gone to sleep, so the dome light will not come on. Once the BCM gets an input to wake it up, from remote keyless entry (RKE) or a door handle, the dome light will turn on when the liftgate is opened.
If the driver inadvertently leaves any interior lamp ON, the BCM will turn it OFF after a 20 minute time-out.
The courtesy lamps will turn OFF immediately if the ignition switch is turned to the ON position or approximately 20 seconds after all doors are closed.
The courtesy lamps are controlled by the body control module (BCM). Inputs from the dome lamp switch and the door ajar switches are monitored by the BCM. When a door ajar switch is closed, or the dome lamp switch is turned to the ON position, the BCM supplies the B+ for the courtesy lamps.
With out a factory Tech2 scan tool or equivalent an knowing how these systems work ,you best bet is to take your vehicle to the dealer or some other ASE certified repair shop !

Sep 04, 2015 | 2009 Buick Enclave

1 Answer

Where is the timer located that controls the dome and outside mirrors lights?


Lamps, Courtesy The interior courtesy lamps are controlled by the generic electronic module (GEM) and are activated by the interior lamp relay. The interior lamp relay coil is grounded by the GEM when:
  • a door is opened.
  • illuminated entry is requested from remote anti-theft personality module.
The courtesy lamps will turn off if:
  • ignition switch is turned to RUN.
  • illuminated entry off request is received from remote anti-theft personality module or after 25-seconds.

Mar 17, 2015 | 2003 Ford Taurus

2 Answers

Interior lights won t turn on


It can be one of two problems. One: pending on what kind of car you have. ..there is a switch near the steering column that turns left or right...adjusting your dash lights and or turning on/you interior lights.#2...check the interior fuse bus panel/box

May 22, 2014 | 2005 Jaguar S-Type

1 Answer

My interior lights won't go off?


Switch has to be replaced, Or just take the fuse out for them.As long as it doesn,t control other functions,

Nov 02, 2012 | 2000 Dodge Caravan

1 Answer

My 1995 4runner backdoor or window won't open


Does the back interior light work? if no, chances are you have the #1 problem with back windows in 4runners, a connection under the back door panel, works itself loose, just plug it back together tight.otherwise check the fuse.#2 if that doesn't work did you bump into the back door, motor placement is sensitive to dings, and gets stuck. if not those prob a motor? i think i am not a mechanic.

Sep 07, 2012 | 1995 Toyota 4Runner

2 Answers

I have a 2005 GMC Sierra 1500 Z-71 - the interior dome light works with the dash switches, but won't work when the door opens. Why?


Is there a button by the headlight control switch? I recently found out that the dome light only comes on while the doors are open when this button is engaged

Jul 01, 2012 | 2005 GMC Sierra

1 Answer

1999 mercury villager interior light won't go off.


If the door adjar light is on than you have a bad door switch. They are part of the door latch assembly. It is more common for the drivers side to go bad but it could be anny of them. A scan tool would be helpful in narrowing down which one it is. What you can try is spraying carb or brake cleaner into the part of the door that holds the door shut (the latch). Spray it into every nook and crany in that area. Open and close the door several times will a serving the door adjar light. If it goes out problem solved. If it doesn't go out get it scanned to see which one has failed and then pull that door pannel to inspect. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Feb 19, 2012 | 1999 Mercury Villager

2 Answers

Drivers door power window control stopped working.power mirrors won,t work interior lights want come on when you open drivers door but the other three doors interior lights come and the power window...


Since it is only happening on the drivers side door to multiple switches and lights on that door only, I think the problem is the wiring harness as it enters the drivers door by the door hinges.

May 04, 2009 | 2000 Ford Taurus

Not finding what you are looking for?
2004 Pontiac Montana Logo

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...