Question about 2005 Buick Park Avenue

1 Answer

The oil light is on a beeping sound comes on like my seat belt is not fasten....it has oil in it....likes 1000 miles for an oil change

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 65 Answers

Hello
Does the icon look like a oil can or is a oil life reminder light if it is a oil can icon then you need to check the vehicles oil pressure and make sure that it does have the correct amount of oil pressure and you have voltage to yhe oil pressure sending unit(switch) if it does then you need to replace the oil pressure sending unit(switch) seen alot of problem with the sending units
Good luck
Chris

Posted on Mar 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Beeping noise coming from glove box area. It beeps 3 times, slight pause then 2 or 3 more times. When I pick up speed for a few miles, it stops. C2 sensor????


Please tell us what vehicle you are working on. Does CEL come on? Does car have security system? Does this still happen if passenger is in car with seat belt fastened?

Jul 12, 2017 | Cars & Trucks

1 Answer

1991 mazda b2600 truck oil light dashboard comes on even with oil


Rod and main bearings are shot. Time for another engine, if you really like this old truck.

Jul 27, 2016 | Mazda Cars & Trucks

1 Answer

Seat belt lights come on when driving down the road


sensor on the seat belt fastener bad. Wiggle it to make it go off with the seat belt locked in place or change the sensor.

Dec 26, 2011 | 2006 Chrysler PT Cruiser

1 Answer

'02 Rendevous beeping randomly, no lights or trouble indicatiors on. Beeps when parked, beeps while driving, no rhyme or reason apparant. sometimes goes 10 or 15 minutes without beeping, other times beeps...


The audible warnings alert the driver of a system concern or a critical vehicle condition. The radio generates the audible warnings through the left front speaker. The radio receives audible warning requests via the class 2 serial data line from the IPC or body control module (BCM). If the radio receives multiple audible warning requests, the warning with the highest priority sounds first. The following lists the audible warning priority and the pulse rate:
Fast rate chime--200 pulses per minute
Medium rate chime--150 pulses per minute
Slow rate chime--50 pulses per minute
Single chime

Is the sound heard different from typical Audible Warnings ?

Fasten Safety Belt Warning
The radio activates the fasten safety belt audible warning as requested by the IPC. The IPC sends a class 2 message to the radio indicating the chime frequency, slow rate and duration (5 pulses). The fasten safety belt warning sounds and the fasten safety belt indicator illuminates when the following occurs:
• The ignition switch transitions to ON.
• The inflatable restraint sensing and diagnostic module (SDM) detects that the driver's seat belt is not buckled, signal is low. The IPC receives a class 2 message from the SDM indicating the driver's seat belt status.
If the seat belt is buckled when the ignition is turned on, the chime does not sound. If the seat belt is buckled while the chime is sounding, the chime stops. If the seat belt is unbuckled after the initial transition to ON, the chime does not sound.
Headlamps On Warning
The radio activates the headlamps on warning as requested by the body control module (BCM). The BCM sends a class 2 message to the radio indicating the chime frequency, fast rate and duration, continuous. The headlamps on warning sounds when the following occurs:
• The ignition is OFF.
• The BCM determines that the driver's door is open, signal is low.
• The BCM determines that the headlamp switch is in the park or head position.
Key-In-Ignition Warning
The radio activates the key-in-ignition audible warning as requested by the BCM. The BCM sends a class 2 message to the radio indicating the chime frequency, medium rate and duration, continuous. The key-in-ignition warning sounds when the following occurs:
• The ignition switch is OFF.
• The body control module (BCM) determines that the driver's door is open, signal is low.
• The BCM determines that the key-in-ignition switch is closed, signal is low.
Turn Signal Reminder
The radio activates the turn signal warning as requested by the IPC. The IPC sends a class 2 message to the radio indicating the chime frequency, medium rate and duration, continuous. The turn signal warning sounds when the following occurs:
• The ignition switch is in the RUN position.
• The turn signal switch is in either turn position, sensing, within 1 second, an open to B+ transition in the turn signal control circuit, left or right turn.
• The vehicle has traveled a distance of 1.2 km (¾ mi) by counting pulses on the vehicle speed input circuit.
The IPC turns OFF the turn signal reminder when either the ignition switch is turned to the OFF position, or the turn signal switch returns to the OFF position, sensing, within 1 second, no transitions from open to B+ in either of the turn signal control circuits, left turn or right turn.
Additional Chimes
The following chimes will turn ON when an associated indicator/message turns ON in the IPC/DIC:
• ABS indicator
• AWD Disable indicator
• Battery/Charge indicator
• Brake indicator
• Change Engine Oil indicator
• Door Ajar indicator
• Hot Coolant Temp indicator
• Low Brake Fluid indicator
• Low Fuel indicator
• Low Oil Level indicator
• Low Oil Pressure indicator
• Low Tire Pressure indicator/reset
• Low Washer Fluid indicator
• MIL (Service Engine Soon) indicator
• Oil Life Reset
• Park Lamp Out indicator
• Rear Hatch Ajar indicator
• Service Traction System indicator
• Service Vehicle Soon indicator
• TRAC OFF indicator
For a description of an indicator refer to Indicator/Warning Message Description and Operation .
For diagnosis of an indicator refer to Symptoms - Instrument Panel, Gages and Console .

Did the Mechanic check for DTC'S - diagnostic trouble codes in the BCM or insturment cluster ? Did you try a Buick dealer ?

Jul 09, 2017 | 2002 Buick Rendezvous

2 Answers

When I turn the car on. I can hear a beep, but no light comes on.


How many beeps do you hear? If it's 4 in a row, and sounds like the same beep you get when you program your radio, you could have an electrical problem. My '03 just started doing that too.

Dec 17, 2009 | 2003 Chevrolet Malibu

1 Answer

Check engine light


go to Pep Boys and Auto Zone and have the code read for free.  and fix it now, as it doesn't sound like something you can wait on.
Also the oil change had absolutely nothing to do with the problems you are having now.
Cars cost money, and it doesn't sound like you are keeping up with the maintenance on this one, sadly you'll pay more in the end.

Apr 03, 2009 | 2003 Kia Rio

1 Answer

Oil light comes on and beeps


Changing oil can't hurt. When was the last time you had it changes?How many miles on that engine?Changing approximately ever 3,000 miles is common practice. The engine oil light and the automatic transmission are two seperate problems.     Engine oil light come on because the sensor reads a low oil preasure.If the engine is not worn then the light can be caused by the sensor getting cloged up (from dirty oil ) and not reading the preasure correctly.  

Jan 04, 2009 | 1996 Volkswagen Jetta

2 Answers

1996 Ford Taurus Making a beeping sound


was the vehicle ever in an accident? Does the airbag light come on when starting? If the lamp is burned out it will send an audible beep to warn

Nov 23, 2008 | 1996 Ford Taurus

2 Answers

Beeping


When you turn key on check if airbag light on instrument cluster comes on. 5 beeps is the tone to let you know your airbag light in instrument cluster is inop..

Sep 03, 2008 | 2003 Ford Escape

2 Answers

Fasten seat belt ding will not stop.


IF YOU TAKE THE PLASTIC OFF NEXT TO THE SEAT YOU CAN RETRACT THE SEAT BELT ALL THE WAY BACK WITH A STAR LIKE WRENCH

Jul 30, 2008 | 1991 Honda Accord

Not finding what you are looking for?
2005 Buick Park Avenue Logo

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...