Question about Honda Pilot

Open Question

Where is the vacuum hose on a honda pilot - Pilot Honda Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2004 honda pilot how to replace the thermostat


You can test to see if it is the thermostat by running the vehicle allowing the coolant in the engine to become hot. Then squeeze the top radiator hose. You may want to use gloves to protect your hands. If you feel a lot of resistance in the hose in the direction of the engine then it is likely that the thermostat is stuck. To replace the thermostat remove the two bolts that secure the thermostat cover. They are located where the top radiator hose connects to the engine block. You can also verify if it is defective after removal by dropping it in boiling water and seeing if it opens. The correct temperature for it to open is usually written on it. They are not that expensive so it is best to use one from the dealer. Regardless, make sure it is designed to open at the same temperature. The assembly (thermostat/gasket) is number 5 in the image below. Just google part#19301-P8E-A10
25362176-ouxd4s33pet12qcxqxxnymvu-4-0.png coolant thermostat Honda Pilot Honda Pilot Forums

Jan 09, 2015 | 2004 Honda Pilot

1 Answer

My 2993 Honda Pilot will crank and partially catch and back fire in the engine area. What could the problem be? jjannelli1@comcast.net


You've done 200k miles in a Pilot since 2003!! Do you ever sleep? What ever the maint done it failed to spot any defects. My guess there is a very weak mixture from a big air leak from hose/gasket/manifold etc.

Nov 03, 2014 | 2003 Honda Pilot

1 Answer

Location of thermostat on a 2008 honda pilot


normally at the end of the top radiator hose

Sep 14, 2014 | 2008 Honda Pilot

1 Answer

2009 honda pilot


blown fuse. wires to the actuator are broken /corroded, actuator not operational, vacuum line loose / cracked missing.

Aug 13, 2014 | 2009 Honda Pilot

1 Answer

How to remove transmission on honda pilot


In order to pull the transmission on a honda pilot it all comes out from the bottom. You must remove the front suspension all the engine harness, pipes and hoses unbolt the suspension subframe bolts and drop the whole thing at one time. Use a suspension lift designed for this or you could drop it and loose it.

May 02, 2014 | 2007 Honda Pilot

1 Answer

Where is the IAT/MAF sensor on my 2003 Honda Pilot


Just past the air filter and before the throttle body. 2 screws hold it in and it can be seen if you look into the air intake hose coming from the air filter box.

Dec 23, 2013 | 2003 Honda Pilot

2 Answers

Where is the pcv valve on a 2009 honda pilot 6 cylindar engine and how do you replace it?


http://www.piloteers.org/forums/2-general-discussions/30092-pcv-vacuum-hose-location.html

Sep 01, 2013 | 2009 Honda Pilot

1 Answer

Cruise control not working on 2003 honda pilot


First thing would be to check the fuse. If the fuse is good, use a vacuum pressure tester and test the control unit. It wouldn't be a bad idea to test the power to the cruise control unit as well.

Nov 10, 2010 | 2003 Honda Pilot

1 Answer

WHERE IS THE THERMOSTAT LOCATED IN 2001 HONDA PILOT


Honda didn't make the Pilot until 2003. Check th year. On the 2003 model you can find it on the driver's side of the engine where the lower radiator hose connects at the engine. Hope this helps,...ZMANRACING

Dec 05, 2009 | 2004 Honda Pilot

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...