Question about 1991 Dodge Dakota

1 Answer

I have a 1995 Dodge Dakota and I need to know how to remove the driver side door glass. thanks .

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

First take off the inside panel. It usually has on or two screws and tree plugs that allow you to pop the rest off the panel off carefully. Once you get it almost off if you have powered windows and locks you have to disconnect them from the power source with the connection you'll see inside the door panel.After the panel is removed lower the window to where you can see the bottom of the glass through the openings in the door. Two people is better for this job. you need one to pull on glass from the top the other to hold onto the window regulator (this is what the window fits into looks like a scissor lift. Pull glass till it is free on both sides. Now tilt the glass sideways and remove it from the inside of the door carefully it is a tight fit but it does come out. Remember how you take it out because that is the way it has to go back in the same way. Happy Motoring!!!!

Posted on Mar 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Are 1995 and 1989 dodge dakota windshield glass interchangable?


the seal is different, 89 is a rubber seal and 95 is bonded, and think its 5mil larger on 95.

Dec 06, 2014 | 1995 Dodge Dakota

1 Answer

How to replace driver's side window on a 1987 dodge dakota


you need to remove the inner door panel and unbolt the glass from the regulator

Aug 22, 2012 | 1987 Dodge Dakota

2 Answers

HOW TO FIND THE CHASSI VIN NUMBER OF DODGE DAKOTA SPORTS


dont you have a owners manual. its says the chassis no location. if you have vehicle registration book, it will be having chassis number written. Usually vehicles chassis plate are seen at driver door side or between glass and dashboard or behind the engine below wind shield. chassis number is written in chassis of vehicle too. pull up your vehicle using lift and check the right side of the chase and you will see chassis number marked. thanks

Jan 28, 2011 | 2004 Dodge Dakota

1 Answer

I have a 1995 dodge dakota. I need to replace driver side door. Need to know how to take door off properly. Need diagram or something. HELP.


Removal & Installation
  1. Matchmark the hinge-to-body and hinge-to-door locations. Support the door either on jackstands or have somebody hold it for you.

  2. Remove the lower hinge-to-door bolts.

  3. Remove the upper hinge-to-door bolts and lift the door off the hinges.

88470g00.gif

Details of a common door assembly-Dakota shown
Click to Enlarge

To install:

  1. If the hinges are being replaced, remove them from the door pillar.

  2. Install the door and hinges with the bolts finger-tight.

88470g60.gif

View of the door hinges-1994-96 Pick-ups

Oct 23, 2010 | 1995 Dodge Dakota

1 Answer

I need a left front door/window schematic on line for a 99 Dodge Durango. I need to see how to put it together.


Front Door
  1. Remove the door trim panel.
  2. Remove the water dam.
  3. Remove the inner and outer door belt weatherstrips.
  4. Lower the window to the full down position and align the glass regulator arm with the access holes in the inner door panel.
  5. Remove the front glass run channel.
  6. Remove the nuts attaching the glass channel to regulator arm.
  7. Separate the glass and lift it up and out.
  8. Disengage the power window motor wire connector from the door harness, if equipped.
  9. Loosen the bolts in slotted holes attaching regulator to door inner panel.
  10. Remove the bolts attaching window regulator to inner door panel.
  11. Remove the regulator through the access hole in the inner door panel.
  12. Installation is the reverse of removal. Tighten the nuts attaching the glass to the lift plate to 7 ft. lbs. (9 Nm).
3455a81.gif
Power window regulator mounting—Dakota, Durango

6125789.gif
Window regulator removal—Dakota, Durango

Posting more on next post for door panel removal and installation.

Oct 26, 2009 | 1999 Dodge Durango

2 Answers

How do you remove the rear glass on a 1997 dodge dakota. I am in need of replacing my broken glass.


You can start by pulling the interior back by the rear window. There are two tabs on both ends on the bottom frame, you can bend them straight.Try to pull the bottom of the window out and watch out for the hinges to carefully lift up the window itself.

Sep 24, 2009 | 1997 Dodge Dakota

1 Answer

1995 Dodge Dakota> Removing door panel. Can't remove Window knob.. have to replace locks(both sides)....easiest steps to replacing the locks??


Their are two options on removing the door crank-one the base of the crank top comes off where it is connected to the panel and if you pry slight with a thin tool it will expose where you can remove with either a torx or a nut driver-second option you must slip in door panel clip removal tool to relase the spring clip-these fly if you don't keep be careful. clip tools are at most auto parts store-by slighty spreading the door crank look down and you will see spring clip.Note it's either nut removal or spring removal.

Sep 17, 2009 | 1995 Dodge Dakota

2 Answers

How do you install a window regulator for a 2001 dodge dakota?


well first take off the door panel it shouldnt be hard remove plastic cover off door.Make sure your window is all the ways up before you remove the motor.you can hold it up with duct tape or anything similar.Then remove the screw that go to the regulator sometimes it has rivets wich have to be drilled off.The new regulator should come with screws if it has rivets if not u use the same old screws.Also unplug the harness of it . Install new one,screw it on and reverse the procedure.Any problems keep me posted

May 23, 2009 | 2001 Dodge Dakota

1 Answer

How to replace power window motor on 2001 dakota


its not hard guys Take the door trim panel by taking off screws and mirror cover / pull out bottom of door and then sides pull up and outthen take off vapor barrier then look inside of door put tape on glass to hold it up take out bolts on the regulator and exchange it Please rate my response thank you very much

Dec 16, 2008 | 2001 Dodge Dakota

Not finding what you are looking for?
1991 Dodge Dakota Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...