Question about Lincoln LS

1 Answer

Engine running extemely rough as if on 4 cylinders. Transmission is shifttinf rough from drive to reverse and back again.

Posted by on

  • Anonymous Mar 22, 2011

    You don't have a vehicle
    Need more on running rough
    Who works on veh,what testing has been done,etc
    Check light & codes !!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lincoln Master
  • 4,369 Answers

The trans is shifting rough due to the engine issue. Is CEL light on? DTC codes?

Check Engine Light flashing or solid on?

Posted on Mar 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1991 Toyota Camry 4 cylinder automatic transmission. I was driving about 10 mph when it just stopped moving. The engine starts and runs fine but when I put it in drive or reverse it won't drive....


You have internal problems with it. Clutches are bad, or could be a hard part broken. The grinding is from the inside of the transmission turn and you put it in park. This is a normal sound, if you were driving and slammed it in park. Except your not moving.

Dec 30, 2014 | Cars & Trucks

1 Answer

How to install flywheel ford f150 6 cylinder engine


Pull drive shaft 4 bolts next pull transmission cross member 4 bolts pull transmission lines 2 pull all wiring 2 pull transmission inspection cover 4 bolts pull transmission 6 bolts pull flywheel 6 bolts install new and reverse process

Aug 12, 2014 | 2005 Ford F-150 SuperCab

1 Answer

My Lexus es300 wont drive when put into reverse or drive. Could this be because of transmission/ bad solenoid or could it have something to do with bad ABS sensor?


There are so many things it could be, but I think I would have it towed to a competent shop and check the diagnostics. More info might help you get more DIY help. Running rough... engine diagnostics, transmission not engaging... transmission diagnostics. Electronic diagnostics are your eyes on modern automobile problems. I hope this helps.

Mar 22, 2014 | 2000 Lexus ES 300

1 Answer

2001 Mazda Protege runs rough once its warm


The following are the general instructions on the start of diagnosing any electronically controlled engine or transmission problem.

The engine and the automatic transmission (transmission control is only for automatics, engine is still computer controlled no matter the transmission type) in this vehicle are computer controlled and in most cases when a fault occurs a fault code is stored in the memory of the computer control module. There are exception to this, such as the Mass Airflow Meter and fuel pressure problems. What must be done is to have all the basic testing done such as a scan of the system for fault codes as well as a check with a live data scanner tool for engine functions that are not within range of normal, a trained technician is required to know what is correct and what isn't, then based on careful diagnostics done from a factory repair manual the correct part is replaced or the wiring repaired or the computer replaced (known as the PCM or ECM,ECU), which is very rarely the problem. Other basic checks must be done as well such as mechanical problems with the engine as well as engine state of tune and mileage on the engine. The transmission can have mechanical issues as well such as no gear engagement at all or a failed pump or other pressure related problems. Also engine mechanical problems can and do cause many drive-ability related problem such as rough idle and other symptoms.

Nov 05, 2012 | 2001 Mazda Protege

2 Answers

1997 Carolla- engine dies when shift to reverse or drive, starts again when put in park. Is this a transmission problem or starter/ignition problem?


There is a switch that only only allows you to start the engine in Park or Neutral. It sounds as if yours is faulty or has a bad connection. Finding it will be the problem.

Jun 19, 2017 | 1997 Toyota Corolla

1 Answer

Turns over then stalls


Check the mass airflow sensor. Possible dirt build up.
Check the rubber vacuum hoses for leaks.

Jun 06, 2017 | 2004 Ford Freestar

1 Answer

Hi my 2001 ford expedition code read po304 my neutral kicks in but does not move back when pushing only forward and my reverse kicks in but does not move and the over drive light is flashing and when in...


A code p0304 is a number 4 clyinder missing causing the rough run condition, last cylinder on the passenger side ,coil or spark plug the transmission problems and overdrive light on is a transmission problem.

Apr 07, 2010 | 2001 Ford Expedition

1 Answer

Random misfire/rough idle/stall


Low fuel pressure due to faulty fuel pump will give misfire codes due to fuel starving conditions. Have fuel pressure tested, preferably when running bad.

Jun 20, 2009 | 1998 Plymouth Voyager

1 Answer

91 LEGACY STARTED RUNNING ROUGH


The cylinders are numbered as on the spark pack you changed. You might have done better putting the seafoam in the tank as an injector cleaner. Not sure why you changed so many parts, you seem to know how to get the codes from test connector lead hookup and the blink pattern. You might also want to check the fuel rail pressure and the crank and cam angle sensors. Before replacing the injector, swap the #4 injector with the adjacent one and see it the code moves with the injector or stays put. If the code stays on #4, then check the injector wiring, if it moves clean or replace the injector.

Mar 16, 2009 | 1991 Subaru Legacy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...