Question about 1993 Geo Tracker

1 Answer

Back up Light Not Working

My backup lights are not working. I have replaced the bulbs, checked the wires and replaced the reverse switch. I have not checked the manual transmission fluid level. Would that affect it??

Posted by on

  • joensab Oct 03, 2008

    my back up lights stopped working after a new clutch assembly was installed. A new clutch cable was installed as well.

×

1 Answer

No try:ck fuse,switch adjustment if any try jumper wire from 12v sourse to switch.there has to be power cut between switch to power or from switch to lights

Posted on Aug 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why don't my 1998 s10 backup lights work when car is in reverse, stop and tail lights work fine all bulbs and fuses seem to be good ?


if the backup bulbs are good then check the neutral switch as this is where the reverse switch is, its part of the neutral switch. it may have stopped working and need replacing. you will be replacing the neutral switch. if you have power out of the switch then check for power and ground at the light socket as there could be a bad wire or connection.

Aug 16, 2014 | Cars & Trucks

1 Answer

2004 Ford Escape BACKUP LIGHTS both are completely not working. We have new bulbs and the fuse is new what could be the problem for the lights not working?


My guess would be the neutral safety switch on the transmission.
The switch also acts as a backup light switch when the shifter is in reverse.
I would check for power at the switch for the reverse light circuit.

Oct 01, 2012 | 2004 Ford Escape

1 Answer

1996 Camry reverse lights don't work


Check if you are getting power to the reverse light switch. Turn ignition on, disconect terminals to the switch and check for power on the positive terminal using a light bulb or a test meter whatever. If power is there jumpthe 2 terminals and check if light backup light works. If it does replace switch. If ther is no power at switch check wiring from fuse box. If light does not work when switch is jumped check wiring to back.

Sep 11, 2012 | 1996 Toyota Camry

2 Answers

My backup (revese) lights do not work on both sides. I suspect that the reverse switch could bd faulty. All the fuses are oaky. Where is this switch located?


BACK-UP LIGHT SWITCH The back-up light switch is located at the upper left side of the transaxle case. The switch is screwed into the transaxle and serviced by replacement. No adjustment is possible.
---

Also, first try to replace the bulbs.

---
Also, if the above two solutions do not work, it could be a wiring problem.

Jul 12, 2010 | 1993 Dodge Caravan

1 Answer

My backup lights will not come on when in reverse; bulbs are good and fuse is not blown; where is the switch for the reverse/backup lights???


the reverse back up lights usually light up when the car is in reverse gear.., however get the wiring checked as you already have checked the fuse and bulbs.

Mar 03, 2010 | 1994 Mercedes-Benz C-Class

1 Answer

Backup lights don't come bulbs check ok


On the side of your transmission, there will be a switch with several wires coming out of it. This is your reverse switch and most likely it will need to be replaced

Oct 02, 2009 | 1992 Chevrolet K1500

2 Answers

Backup lights do not work...1987 325ic...new bulbs installed, all other lights work perfectly...in reverse, with lights on, backup lights do not come on. Where is the backup light switch? There is a set...


it depends if it is auto or manual. There is a nuetral saftey switch on the auto-located on the manual valve arm(the piece that the linkage from the shifter connects to at the trans.) On the manual trans. there will be a 2 pole switch on the top shift plate that is for reverse only. The starting(clutch engagement switch)is located at the clutch pedal-2 seperate switches. First check for power at the back up light bulb connecter with reverse engaged(may have power at all times when key is on). Then check for ground when reverse is engaged-from bulb connecter to ground) with reverse engaged. The switch will just provide the ground when reverse is engaged. The power comes from an alternate source. Most likley a switch issue but at least this way you can be sure.

Aug 09, 2009 | BMW 325 Cars & Trucks

1 Answer

Reverse lights not working on 1993 Ford Ranger


Not sure what transmssion you have but basically it goes from fuse on P/O wire to either the MLP switch on automatic or just a backup lamp switch on manual and leaves the switch on BK/PK wire to the bulbs. Should be easy to trace with a 12v test light.

Feb 05, 2009 | 2006 Ford F-150

1 Answer

S80 backup light wont work


There are only 2 things to check other than the bulbs, 1st the back up lite fuse, and the 2nd the back up light switch on the trans, if the fuse is ok replace the backup light switch.

Nov 19, 2008 | 1991 Volvo 240

Not finding what you are looking for?
1993 Geo Tracker Logo

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...