Question about 2002 Chrysler Sebring

1 Answer

I'm not sure how to put a timing bell in my 2002 Chrysler Sebring. Please help me.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

When setting the marks on the intake cramshaft sprockets (the two on top), one of the them need to be removed. With a wrench and an extension you can move the whole intake cramshft removed to align with the wholes so you can put the bolts back in place. Don't forget to activate the timing chain tensioner before try to start the engine this is very important!! It is recomended to do two or three complete turns on the engine by hand by turning the cramshaft with a socket to make sure no interior parts are on the way. Good luck!

Posted on Mar 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water pump on a 2002 chrysler sebring and now am ready to put the timing belt on , when i took the old belt off both the cam gears turned slightly towards each other , please help , thank you


first up --is the timing belt going back in the same direction you took it off
if you don't know then get a new belt as an old belt running in the wrong direction to which it was running will fail very quickly and if that happens there is valve bending problems
next the timing marks face each other exactly( 9 and 3 oclock)

Feb 28, 2017 | Chrysler Cars & Trucks

1 Answer

2005 Chrysler Sebring alarm prob


If the car alarm keeps shutting off you should take it to a mechanic who fixes cars. The alarm in the car is a motion sensor when the car is locked but the sensor is turned off.if the sensor is still on the alarm could go on. The alarms sound comes from a bell inside the car and it vibrates against the inside of the car. The bell could be getting rusty.

May 24, 2013 | Cars & Trucks

1 Answer

How do i change headlights


That is a somewhat common problem with those. If you remove the bulb from the back of the headlight lens under the hood you can some times put a funnel into the open socket and use a hair dryer to dry the condensation. Then you need to be sure the rubber gasket between the lens and the bulb socket is in good repair so it dont build up like that again, I hope this helps.

Sep 21, 2012 | 2002 Chrysler Sebring

1 Answer

2002 chrysler sebring how to set correct time


The only way to set correct time is by putting the marks on the crank and cam gears in line with the marks on the timing housing or block. Other then that there is no way to adjust timing.

Mar 26, 2011 | 2002 Chrysler Sebring

1 Answer

2002 Chrysler Sebring Convertible - Trunk lid will not stay open


All gas charged supports are not created equal. I recommend using O.E. for this application.
Snow,ice and trapped water make the lid heavier than it should be make sure these are not the issue.

Jan 12, 2010 | 2002 Chrysler Sebring

1 Answer

Oil light on while driving 2002 Sebring


2.7 ? This motor has oil problems if not changed every 3000 miles. Put a chrysler filter on it and the correct weight of oil, never use a fram oil filter.

Jul 02, 2009 | 2002 Chrysler Sebring

1 Answer

Paint color code


The below link will take you to the 2007 Chrysler Sebring colors. Please note that you mentioned it was a 2002, then a 2007. The link is for 2007.

http://www.paintscratch.com/cgi-bin/makepaint2.cgi

Jun 02, 2009 | 2002 Chrysler Sebring

1 Answer

The heater does not put out heat


I had the same problem, turned out to be the water outlet was bad, check the fluids make sure it stays full, helped with mine

Apr 12, 2009 | 2002 Chrysler Sebring

Not finding what you are looking for?
2002 Chrysler Sebring Logo

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8560 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...