Question about Geo Tracker

1 Answer

I need to find out the name of a part on my 1993 GEO Tracker. I have a picture of the part, but the picture does not show the name. The picture is located here: http://www.kick-fix.com/tranny/clutch/clutch.JPG It is listed as Part # 11 This is my only vehicle and I need it fixed ASAP and without a part name, I can't begin to order the part. Many Thanks, Shadowe

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Looks like what I would call the Cutch Throw Out Arm. It is connected to the Throw Out Shaft.

Is the part actually broken or did it just come loose and slip on the shaft? There is a pinch bolt that both holds it on the shaft and clamps it tight to the splines so it can't rotate. If the bolt was stripped or broken you could pick one up at any good hardware store. Likely to be metric.

Good luck

Posted on Mar 21, 2011

Testimonial: "Thanks! I am hopeful that is the part and truly appreciate your response."

  • Shadowe1993 Mar 23, 2011

    That piece actually broke off and the nut and washer are missing. I had guessed anything would be metric, being that it was built in Canada. We will be needing to replace the arm, bolt, washer and nut. Now we have an idea what it is called it should not be terrible hard to find, and hopefully not expensive. Many Thanks!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many quarts transmission fuild needed for 1993 tracker manual geo chevy How many quarts of transmission fuild needed for geo tracker 1993 manual


lost he operators guide>? glove box

go here
http://www.fixkick.com/index9.html
click 1994 book
see page PDF 201, there it is, and all other like facts,

save the book so next time have one.

Feb 13, 2015 | Geo Cars & Trucks

1 Answer

Radio wont turn on after installation on 1993 geo trackdr


not even the dial show stations , the display active (not back light)
but shows its digitally active??
if not, the fuse is blown or there is no power to radio.
or its ground is open.
or OMG bad radio
it only takes, 5min to bench test any radio.
wana learn.?

Jun 21, 2014 | 1993 Geo Tracker

1 Answer

How to hook spark plugs and wires to distributor cap on 1993 geo tracker


Do them one at a time if not you need to know the firing order

Jan 19, 2014 | 1993 Geo Tracker

2 Answers

1993 geo tracker won't shift into second gear


3sp, 4sp or 5speed
all are different, radially.

Apr 06, 2013 | 1993 Geo Tracker

1 Answer

1993 geo tracker , the front cv joint axles need new boot and bearing. Is it easy for a back yard mechanic?


ITS NOT A HARD JOB TO DO BUT YOU NEED TOOLS LIKE TIE ROD END REMOVING TOOL,YOU NEED SHAP RING PLIERS,YOU NEED HYDRALIC JACK AND AXLE NUT SOCKET 1/2 BREAKER BAR AND A TORQUE WRENCH RANGES TO 200 FT LBS YOU WILL NEED REPAIR MANUAL FOR TORQUE SPECS.THE ,MANUAL WILL SHOW AND TELL YOU HOW TO REMOVE FRONT AXLE SHAFT CV JOINTS.IT WILL LOT CHEAPER TO BUY WHOLE FRONT AXLE WITH NEW CV JOINTS.YOU NEED CV JOINT BOOT CLAMP TOOL AND ITS A WHOLE LOT OF CLEANING INVOLVE PLUS PACKING NEW BEARINGS WITH GREASE.ITS MORE OF HEAD ACHE BEST TO BUY NEW ONE.

Aug 28, 2010 | 1993 Geo Tracker

1 Answer

Reset Check engine light on 1993 Geo Tracker without scan tool.


A 1993 Tracker will have OBD1 technology. Just unplug the battery for 5minutes and plug it back in. If the light persists You will have to find out and repair the problem that your cars computer believes it has.

May 11, 2010 | 1993 Geo Tracker

1 Answer

1993 geo tracker fuel injector


ecm does control but is also based on input from the Throttle position senser. unplug the TPS and try again. Also make sure the ECM and engine grounds are good

Feb 21, 2010 | 1993 Geo Tracker

2 Answers

Was told there are 3 fuel relay switches on a 1993 geo tracker...Can you tell me all the locations?


The data svcs only show 1 fuel pump relay on this vehicle, it is located under left side dash under and perpindicular to ecm.

May 31, 2009 | 1993 Geo Tracker

1 Answer

1990 GEO trakcer window regulator


interior door panel is removed...window glass is removed from regulator...regulator (criss cross scissors shaped) with bolts or rivets holding it in place in window frame is removed....motor is removed from regulator if it is power window......reverse procedure with replacement with exception of bolts needing to replace rivets usually when DYI...good luck and hope that gives you a general picture of the job, which is rated at 1.5 hrs in the book for a pro to do

Dec 04, 2008 | 1993 Geo Tracker

1 Answer

1993 geo tracker clutch pedal


the rubber or the whole pedal
and why
state your problem.
seen em all.

Jul 09, 2008 | 1993 Geo Tracker

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...