Question about 2001 Oldsmobile Aurora

2 Answers

My passenger side window does not work also the windows in the back. Could u please help me. Thanks!

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Expert
  • 1,114 Answers

It sounds like the window lock may be on. Make sure that it is off, press it quite a few times as they can get hung up/frozen and not allow you to use the main switch. If that is not the issue, then I would recommend that you use the switch on each of the impacted doors to see if you can raise the windows. If that is not the issue the I doubt that 3 of 4 motors would have gone out simultaneously, but if all else fails, then you will want to see if you are getting power to the electric motors that operate the windows.

Posted on Mar 21, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 296 Answers

You need new motors. Common problem with Oldsmobile's cheap parts.

Posted on Mar 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power window


more than likely motor in door itself or switch if you have checked fuses

Jan 13, 2014 | Mazda RX-8 Cars & Trucks

4 Answers

2006 Toyota Avalon- Changed the battery and the driver side button to roll the passenger side window down doesn't work. The remainder of the buttons work, just not that single button. The passenger side...


try going to passenger door window switch and reset it by going down and holding for extra 3to5 seconds after window is down, do same to go up, then try doing it with master switch don forget to hold it longer, this is a reset also used on Scion vehicles, hope it helps.
Good luck

Jan 09, 2011 | 2005 Toyota Avalon

2 Answers

Power window switchs on 1996 gmc jimmy


Inspect or replace the window lock and unlock switch on the drivers door power window switch. There is a lock and unlock switch that will disable the switches to the other power window in the Jimmy. Check to make sure that switch is in the unlock position to have the other power window switch to work.
Thank you for suing fixya and good luck.

Apr 19, 2010 | 1996 GMC Jimmy

1 Answer

1998 chavy Cavalier-all windows but drivers side dead


you have to run a power wire to the motor in the door and press up on the window button it should go back up if not then you need to change the button hook up or the motor

Mar 17, 2010 | Chevrolet Cavalier Cars & Trucks

1 Answer

96 Camry Power Window problem


the power windows of most toyotas only works if the master switch located on the drivers side is good. remove the master switch check for burned traces on the printed circuit board. solder a jumper wire across the burned part and it should work

May 30, 2009 | 1989 Toyota Camry

2 Answers

Power windows


Hi
it happen with me also actually the problem is the power window get jammed from the inner part..... you if you able to open it just open now clean it well then spray the lube into it and for a long time it work properly..... thankyou
power-windows-jserdy1edku5qfscwskpevsm-4-0.jpg

power-windows-jserdy1edku5qfscwskpevsm-4-2.jpg

power-windows-jserdy1edku5qfscwskpevsm-4-5.jpg

Mar 18, 2009 | 1996 Ford Windstar

2 Answers

New battery in 06 mazda 6


1. Turn ignition switch to "on" position.
2. Open passenger window completely from passenger side window switch.
3. Close passenger window completely from passenger side window switch, and hold switch for an additional 2 seconds.
4. Turn ignition back to "lock" position.

That's it. Works like a champ. And here you thought it was more than just a battery dying....I did.

Aug 11, 2008 | 2006 Mazda 6

Not finding what you are looking for?
2001 Oldsmobile Aurora Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...