Question about 2001 Mitsubishi Galant

1 Answer

Removal of passenger door panel on 2001 Galant

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Simple there are 4 or 5 screws you need to remove. Sit in the car and facing the door panel theres one in the coin pocket, another in the door handle( you have to hold the handle out to get to this screw) one one the top left and two more on the right of the panel ( your car may have the last 3 screws exposed already if not they look like two plastic dots and you need to open them with your finger or a flat head) make sure all the screws are out and then grab the whole panel from the bottom and it pull it up and towards you. it pops right out theres maybe 8-10 or these points that need to be popped off then the panel will hang from the window trim then just pull it up carefully. Careful now the panel will be just hanging by the power door lock electric plug. unplug it and your good to go. Follow in reverse these instructions to replace panel.

Posted on Apr 06, 2011

Testimonial: "You are right on. Thanks"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove electric passenger side view mirror freom 2007 mitsubishi galant es


not exactly same steps but similar. Most cars I have worked on the screws were along the bottom and on the arm rest. Make sure you remove all screws some may be under a access panel. Use caution when pulling on clips

Jun 26, 2016 | 2007 Mitsubishi Galant ES

1 Answer

Door handles wont open doors


Fixed 1997 Ford Explorer Door wont open - YouTube

? 2:03
https://www.youtube.com/watch?v=Gs3eC8E-gbU
Sep 6, 2014 - Uploaded by craiwin
I fixed my 1997 Ford Explorer Door won't open problem! ... I have the same problem but my passenger side door on my 2001 Ford Explorer locked and won't open smh ... will this work for the rear passenger doors? ... How to Replace Rear Inside Door Handle Latch Cable 2002-05 Ford Explorer Mercury ...

98 Ford Explorer Door Won't Open Part 1 - YouTube

? 0:30
https://www.youtube.com/watch?v=oY4IcNdGK68
Apr 5, 2010 - Uploaded by gdellinger
A couple weeks ago the door handle just stopped working on the... 98 Ford Explorer Door Won't Open Part 1 ... The remote would open all other doors. ... on a Ford Exploer 91-2001 - Duration: 7:27. by diversity2 37,309 views.

98 Ford Explorer Door Problems- how to open without panel ...

? 4:22
https://www.youtube.com/watch?v=lJ0Fsh3561s
Jan 1, 2013 - Uploaded by inwinblades
98 Ford Explorer Door Problems- how to open without panel removal. inwinblades .... HELLO panel removal??? door won't open... Been searching all ... ok this better work on all doors, im aboutt o try this on my rear passenger door. .... I didn't care about the plastic door handle so i just "busted" it to pieces.

Rear doors can't open from inside - Ford Explorer and R





Jan 05, 2016 | 2001 Ford Explorer

1 Answer

How to replace " cabin


The 2001 model Aztex has 2 cabin filters, they usually come 2 to a box when you buy them.
The charcoal carbon filters are the best.

Removal:

•Open the IP compartment door.
•Remove the rear inside IP compartment door.
•Open the HVAC module assembly access door
•Remove the RH passenger compartment air filter from the HVAC module.
•Slide the LH passenger compartment air filter to the HVAC module opening.
Remove the LH passenger compartment air filter from the HVAC module.

Installation Procedure:

•Install the LH passenger compartment air filter into the HVAC module opening.
Slide the LH passenger compartment air filter toward the left side of the HVAC module.
•Install the RH passenger compartment air filter into the HVAC module opening.
•Close the HVAC module assembly access door.
•Install the rear inside IP compartment door.
•Close the IP compartment door.

I Hope this information is helpful.

Sep 03, 2011 | 2001 Pontiac Aztek

1 Answer

Passenger door panel removal. it seems like the


Hi!!

Here is a blow out diagram of the door panel for your vehicle.

5a45432.jpg

If you feel you need step by step instruccions with illustrations to R&R the door panel, click the following link http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c1528006f79c

Don't forget to rate this post!! Good Luck!!!


Jul 17, 2010 | 1996 Toyota Corolla

1 Answer

How to remove the door panel of my 2001 Galant to replace the power window master switch?


how about placing the panel back on to the door ledge when placing the door back on, I am having a problem tith this. do i have to remove that little triangle cover by the side view mirror to put it back on the ledge?

Dec 25, 2009 | 2001 Mitsubishi Galant

1 Answer

Driver/Passenger interior door panel removal Re: 2002 Chevrolet S-10. How is it attached at the top? First vehicle for my son as we are trying to elimate the plastic on plastic rattles in the passenger...


nothing is attached at the top of the door panel, just try lifting it but be sure you remove the cover of the sidemirrors to ease up the lifting. hope this helps

Jul 06, 2009 | 2001 Cadillac DeVille

2 Answers

Need to replace Mirror Assembly, 03 suburban


Your going to have to remove the inside door panel to get to the three bolts that hold the out side mirror assembly. Once you have the door panel off you'll see the three bolts that hold the mirror assembly, just un-bolt and un-clip the wire harness to the electric/heated mirror. To install the new mirror assembly, just do everything in reveres. Go to Auto Zone and by extra door panel clips, there is a good chance of breaking some of the retainer clips and Auto Zone will have the step by step instructions to replacing the mirror assembly and the removal to the door panel. Good luck and keep me posted. Be glad to help.

Jun 22, 2009 | 2001 Chevrolet Suburban

1 Answer

Door panel removal


The book says 1. remove panel pull strap 2. remove door handle bezel 3. on 1995-2001 models,remove power accesory panel and trim panel upper extension. 4. remove armrest screws and pad. 5. remove window handle,I guess if not power windows.
KD makes a tool to go in between door panel and door to pop the door clips loose. KD 3705
You will also have to have a window crank tool if it is manual window. KD431
Hope that will help.

Mar 23, 2009 | 2001 Chevrolet Silverado 1500

Not finding what you are looking for?
2001 Mitsubishi Galant Logo

371 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...