Question about 1995 Toyota Camry

Open Question

I have a 300SEI auto. After taking off from a stop (no problem), the car would not change to 2nd gear. It went to "neutral" no gears at all. After 15 minutes it had 1st gear again but again on gear change it went into "neutral". Ichecked the gearbox oil, it is full. Before this, no indication of any problems, gear changes were smooth. Thanks. TBez

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: transmission 1990 4runner

your transmission is going to ****. get a new one. or convert it to a manual

Posted on Oct 22, 2008

SOURCE: ENGINE LACKS POWER (4AGE) 1600 CC, 4 CYL, TWIN CAM

I had the fuel pump recently replaced i just assumed the fuel filter was replaced also cause my fuel pump is in the gas tank. My air filter is clean and I have 4 fuel injectors, no carburetor. A friend of mine who has looked at my car for me says it sounds like there is some kind of air leak but can't figure out where it is coming from?

Posted on Oct 28, 2008

countrysi248
  • 443 Answers

SOURCE: Automatic gearbox takes a long time before it will change gears

Have you serviced your transmission latley ? like filter and fluid change ? just a thought .. first thing I would do . then go from there. Jerry

Posted on Apr 27, 2009

  • 3 Answers

SOURCE: GEARBOX PROBLEM

I hate to break it to you, but one of the most common problems with a 90-95 mr2 turbo or non turbo, is the transmission. It's sad to say but it sounds like your syncros. It is one of the biggest flaws with the car. I love mr2's. I have owned several, and everyone of them have had the same problem. It's most common in the shift between 1st and 2nd gear, but it will eventually start to go in every gear. up shift or downshift. It will start gradually, and eventually get to the point where you wont be able to put it into gear. Makes racing a nightmare. If you slam it into gear when it's not going, you run the risk of grinding your gears, bending your forks, and other various costly repairs with your transmission. I suggest that you don't punch it. Shift before 4500 rpms in all your gears until you can afford a complete rebuild. When you do that make sure you use the proper gear oil. If you use a cheap one, or have a non toyota mechanic do it, they may use a gear oil that will actually destroy your syncros faster. Trust me the car is a wonderful car. You won't have more fun in another car until you drive a Corvette z06.... I say that just cuz it is the only other car in the world I will drive beside my mr2.......Best of luck mate.

Posted on Sep 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Runs great until shifting from 1rst to 2nd gear (auto-trans)suddenly bogs down like it went into neutral, what could this be


run the fault codes and check for TCM problem. If it shifts into neutral like you describe then the engine would increase in rpms as the load came off. More than likely shifting into a too high gear which indicates a selector program problem.

Dec 15, 2014 | 2001 Ford F250 Super Duty Super Cab

1 Answer

3000gt transmission


Hi,
Look on a 3000GT forum (search on Google) to find out how to read the transmission codes. I bet they are stored in the transmission computer. This will tell you what needs fixed.

Also, does sound like the shifter may be out of adjustment. Maybe a cable is broken or loose.

GL,
TD

Oct 30, 2013 | Cars & Trucks

1 Answer

1999 civic auto transmission problem, won't catch gear while running


Check your input or output sensors on top of tranny. Check engine light?

Apr 06, 2017 | 1999 Honda Civic

1 Answer

A problem with my VW Golf mk4 2.3 V5 auto gear selection. Hi all, ive got a mk 4 golf 2.3 v5 auto, the gear transition between 2nd and 3rd is playing up. When the car is cold it will either make the...


hi, i would like to warn u that i had this issue with the same car, eventually the gear box stopped going above 2nd gear ,would not change up even in semi manual,i was told i needed new gear box,had a recon box fitted, but now the garage says i need a new computer cause it not communicating with the gear box properly,cost so far 1200 pound + what ever computer cost, fingers crossed this works

Oct 12, 2012 | Cars & Trucks

1 Answer

I was driving my car "1996 Chrysler Cirrus 2.5L V-6 automatic" yesterday. when the transmission went into neutral. i got off to the side of the road safely. when i tried to put it into gear i had...


this sounds like transmission failure as limp mode would allow reverse and 2nd gear only to allow you to drive to a shop to have it checked out.

Jun 20, 2011 | Chrysler Cirrus Cars & Trucks

1 Answer

My 2004 audi s4 makes gronchy noise when i put it in to 2nd gear when cold whats causing it?


If I've understood your problem correctly.....when changing from 1st gear into second the box is giving a metal on metal crunching sound?
  • This would be the syncromesh ring which is not equalizing the speed correctly.
  • The problem usually happens when there is wear on the same part.
  • Check to make sure that the correct transmission fluid has been used in the box.
  • To alleviate the problem and delay the time when it will require attention, use the double de- clutch method of changing gears, especially when the transmission is cold.
  • The double de-clutch is carried out in the following way.
  1. When in gear and changing from 1st gear to 2nd, change into neutral and release the clutch and then depress again before selecting 2nd gear....It is not required to rev the engine in the neutral position when changing up....
  2. When changing down rev the engine when the shift lever is in neutral for each change.
You'll soon get the hang of it and stop the crunching sound, protecting the box at the same time....
Regards Johngee

Nov 13, 2010 | 2004 Audi S4

1 Answer

Is it advisable to shift to 2nd gear directly from neutral in cars. what will be the damages.


the idea of being able to change manually in an auto box is that you have more control in snow and ice.
when in snow/ice you should pull away in 2nd gear(stops wheel spin).
you will do NO DAMAGE whatever.....

Jun 23, 2010 | 2002 Hyundai Accent

1 Answer

Honda auto gearbox problem


worn shift fork. shifts linkage could be binding.

Mar 29, 2009 | 2000 Honda Accord

1 Answer

My '01 Mustang V6 revs high when in neutral/when changing gears.


sounds more like the IAC, Idle air control valve.. they can be cleaned with carb and choke cleaner gently...

Nov 17, 2008 | 2001 Ford Mustang

Not finding what you are looking for?
1995 Toyota Camry Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...