Question about 1989 Mazda 323

1 Answer

Mazda E-BG5P tune up specs

Not too sure how this web site works...
Am after the correct plug and gap for this engine.
Regards

Posted by on

  • Anonymous Mar 30, 2014

    I mean I need to the number placement on the spark plug gap for changing the spark plugs for the correct setting for proper engine performance and operation.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

At an auto parts store, if you tell them the car you have (year, make, and engine), they can look up the correct one for you. If you go with the Bosch Platinum +2 or Platinum +4, they'll come pre-gapped, so you don't have to gap them yourself. I was unable to find a listing for what the proper gap is, but at the store they can either tell you or sell you a pre-gapped plug that you won't have to worry about setting.

Posted on Aug 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a knock sensor and a 1 -misfire code. I recently gave my car a tune up and within a month i had a check engine light on. Can you tell me what i should check? Thanks


If you could elaborate a bit more on what was done to the car we could pinpoint the problem right away. However, typically a tune up is plugs, wires, cap, and filter. Given those four changes, I would point my finger at the plugs. Many of times spark plugs do not come pre-gapped. Meaning the distance between the metal and the electrode, white looking ceramic are not measured per spec. If you did not gap the plugs, I would recommend taking them out and adjusting the gap to spec. You can call the dealer and ask them for the recommended spec. I have attached a pic of a spark plug with an arrow indicating how the gap is measured. You will need a feeler gauge to measure the gap and adjust.rltofixya_3.jpg


Without proper gap the engine can/will misfire.

May 26, 2011 | 1995 Nissan 200SX

2 Answers

Sparkplug gap 94 mazda 626


Make: MAZDA
Model: 626 - LX
Year: 1994
Engine: L4 - 2.0L - FI - - GAS

Part Number RC12YC
GAP .044" w/DOHC (Original Equipment Manufacturer and/or Original Equipment Equivalent)


Make: MAZDA
Model: 626 - LX
Year: 1994
Engine: V6 - 2.5L - FI - - GAS

Part Number RC12MC-4
GAP .044" w/DOHC (Original Equipment Manufacturer and/or Original Equipment Equivalent)


Hope helps (remember to rate this answer).

May 13, 2011 | Mazda 626 Cars & Trucks

1 Answer

Changed spark plugs in my 1999 chevy blazer and it wont crank over. Gapped the plugs to specs...should I've also changed the wires, cap & rotor also?


When you go to an auto store and they give sell you spark plugs they should already be gapped to spec. There is no need to adjust the gap. This may be the reason your car will not start. I would try new spark plugs first then wires. Since the vehicle is a 99 it probably could use a tune up (spark plugs, wires, coils, cap, rotor, chassis lube, and transmission fluid check and flush if needed). Also make sure that the engine block ground strap is in good condition and that there is no corrosion covering the ends of the ground strap. The ground strap is typically located near the firewall and is directly attached from the engine block to the frame of the car.

Mar 11, 2011 | 1999 Chevrolet Blazer

1 Answer

I have Mazda 323 car of 1991& it's engine is BG5P EGI-MPI, it is not start, I need engine wiring diagram


Sorry threw some old papers out a few years back as its so old its obsolete

Jan 01, 2011 | 1991 Mazda 323

4 Answers

What are the spark plug gap specs for a 2008 Kia Rio?


The gap is .044"

Hope this helps

Bob

Oct 18, 2009 | 2008 Kia Rio

1 Answer

Tune up Mazda 6


the owner of the car should be able perform engine tune-up . Prepare the tune up tools and materials . so that when tune-up is performed ,engine should be on peak performance and within specification.Use multi tester , Use timing light,use dwall meter ,use tachometer ,use feeler guage, adjust spark plug and contact point gaps. Adjust Idle speed and Idle mixture. Adjust tappet clearance,observe safety rules.If the owner of the car cant do the job done because of work then the owner of the car should go to a car mechanic and let them tune-up the engine.

Oct 02, 2009 | 2004 Mazda 6

1 Answer

Spark plug gap setting for a 98 range rover


what have you replaced with your tune up? should change plugs and plug wires, as well as the fuel filter, and air filter. the plugs should be set to factory spec.. be absolutely sure you've got the correct wires going to the correct plugs. the coil packs are a pain to get to but if all else fails, it may be time to replace them.

Sep 30, 2009 | 1999 Land Rover Range Rover

1 Answer

2000 Mazda Millenia


Exhaust leak? Please describe. Make sure correct spark plugs were used (I think gap distance makes a difference, but ask a local mech or store parts employee) and the intake manifold is put back on with correct torque specs. Make sure there are no leaks in the air intake hose, air box, etc as this will effect performance.

Jul 28, 2008 | 2000 Mazda Millenia

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

551 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...