Question about Ford Fusion
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Ford Focus side brake lights
i have had this problem before with fords and the solution i found was to take out the door chime and clean up the conacts and then instal it again just how it was in there.....first i would disconnect the negative side of the battery before you do this because when i did it i got zapped. after you connect it try the brake lights and tell me what happens.
also #2 check for a bad ground wire (any black wire attached to the body or frame usually with a green screw) check for corrosion. if corrosion is present take off that wire and scuff up both sides of where the screw and the eyelet connect with the body then connect again.
Posted on Sep 30, 2008
You will need to look in trunk and pull back the covering over the light area on the side you need to replace. Once exposed, look for the wires going into the light housing and twist the plug to unlock it and remove the bulb. Twist and remove the old bulb or Pull the bulb out of the socket. Reverse the process to install the new bulb and replace the socket.
Posted on Aug 27, 2009
Common fault on FORD
Usually due to a poor connection in the YELLOW PLASTIC CONNECTOR underneath the passenger seat.
Just push it together properly and it should clear the AirBag fault
Posted on Sep 06, 2009
Tips for a great answer:
Nov 15, 2016 | 2003 Ford Focus
Feb 24, 2011 | 2003 Ford Focus
Jan 04, 2011 | 2000 Ford Focus
May 17, 2010 | 2000 Ford Focus
Oct 23, 2009 | 2003 Ford Focus
Jun 04, 2009 | 2000 Ford Focus
Jun 01, 2009 | 2006 Ford Focus
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: