Question about 1994 Honda Prelude
How to change the oil and filter on a 1994 honda prelude
Um, need a 17 mm wrench or socket to remove the drain plug under the motor and the oil filter is behind the motor almost center, but get to it from the front or maybe driver side of the car. When u remove the oil filter, make sure the old o ring was remaoved as well, can easily tell if it is by looking at the old filter, it should still be on it.
Put some old oil on the new filter o ring to make sure it doesn't kink when u install it. To tighten the filter, screw it by hand until it' s snug, then give about half a turn more.
Engine should need about 3.7 litres or less to be full. So put 3 litres in it, start car for about 10 seconds and turn it off. Verify oil level and top up as necessary.
Posted on Sep 09, 2008
Tips for a great answer:
Feb 05, 2015 | 1994 Honda Passport
Apr 05, 2011 | 1994 Honda Prelude
Feb 06, 2011 | 1992 Honda Prelude
Dec 31, 2010 | 1998 Honda Prelude
Sep 09, 2010 | 1996 Honda Prelude
Sep 10, 2009 | 1999 Honda Prelude
Mar 14, 2009 | 1988 Honda Prelude
Feb 27, 2009 | 1993 Honda Prelude
Dec 22, 2008 | 1994 Honda Prelude
89 people viewed this question
Usually answered in minutes!