Question about Chevrolet S 10

1 Answer

I have a 1985 s10 with the2.8 5 speed trans when i let the cluch pedal up it makes a constant rubbing noise and a high pitched squeel and its all qieut when i shove the pedal down any sugestions?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,740 Answers

Hi and welcome to FixYa, I am Kelly,
Your clutch release bearing (throw out bearing) has failed. The transmission has to be unmounted from the engine to change this bearing. (Just like a clutch job!) Being this is a 1985 vehicle you should inspect the clutch plate and the pressure plate for wear. The fingers on the pressure plate should be quite worn if the throw out bearing is doing as you stated in your post. I.e rubbing sound and high pitched squeel. Inspection of the clutch plate consists of making sure the rivets are still not even with the friction pad surfaces. Don't forget to also inspect the engine flywheel for abnormal wear while your working in this area.

Things you might need.... U joints
Transmission rear seal
Clutch Plate
Pressure Plate

Thanks for choosing FixYa,
Kelly

Posted on Mar 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 endeavor making whining noise from rear end at any speed. It is a front wheel drive. Put on new tires, still doing it.


If the sound gets higher pitched with higher speed, you may have a bad wheel bearings. If the whining stays constant, there may be something rubbing like the brake backing plate (especially on drum brakes). Try putting your hand near the backing plate after you drive it a bit. The friction from rubbing will make it hot.

Mar 19, 2017 | Cars & Trucks

1 Answer

Squeeling noise


i think,its timing belt noise.

May 14, 2013 | 1992 Honda Accord

1 Answer

Renault Kangoo 1900 diesel van squeeling over 26 mph but ok if i hold the same speed.


suspected clutch throw out bearing
failing
pressing on the clutch pedal loads up the bearing and the noise stops but removing the foot from the peddle allows the the pressure plate fingers to spin a loose bearing race ans so makes the noise

Mar 16, 2017 | Cars & Trucks

1 Answer

1985 toyota mr2 engine noise


It still could be the throw-out bearing. When going bad, they have a high pitched whine or whistling, and if bad enough, could imitate a vibrating sensation. IDK, I would have a mechanic there listen to it.

Jul 12, 2012 | Toyota MR2 Cars & Trucks

1 Answer

Hyundai accent 2005 when starting up the vechile and driving there is a constant ugly sound coming from the front passenger side wheel and when applying the brakes on there is a high pitch squeel


That screeching sound is a warning that your brake pads are worn down to the point where they should be immediately replaced. If you do not replace the pads, you'll score the rotor and incur an additional expense. Remember to replace the brake pads on both sides, i.e., driver and passenger side.

May 01, 2012 | 2005 Hyundai Accent

1 Answer

I have a 1999 dodge ram 1500 when you push the clutch in all the way there is a grinding noise and tough to engage into gear and there is a high pitched squeeling noise that comes and goes as the pedal...


you need to replce the cluch and preasure plate. the clutch is gone, its hard to shift because there is nothing left to pushout on the plate and the squeeling is from the same problem, the clutch works like brakes, when the pads are gone and you step on brake you get asqeeling sound from it being metal to metal the same thing is happening with your clutch

Mar 26, 2012 | 1998 Dodge Ram 1500 4WD

1 Answer

The heater fan on my 98 chevy silverado stopped working... worked on high at first but made a high pitched noise and stopped all together


Run 12V directly to the motor and see if it will run, if it dosent than the motor is bad, if it does than the resister is bad, the resister makes the blower run and also regulates the speeds for the blower, but chanses are if it was making a high pitch squeel before it quit the motor went out.

Dec 10, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

98 saturn Sc2 makes a helicopter sound in the front. Thought it was the tires replaced all 4 but it still makes the same sound. What could it be?


this isn't a solution, just a brainstorm of ideas
-front rotor? (brakes) this would cause lots of noise and viberation while braking over 50 mph
-it could be your belts?... if it makes the noise while the car is parked, and increases pace when you rev the engine.
-it also could be the cluch, (if standard tran) as that can make a high pitched chirping noise, but that is unlikely...

Jul 07, 2009 | 1993 Saturn SL2

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...