Question about Chevrolet Silverado 3500HD

1 Answer

Reset oil change light 2004 c6500 with cat engine Manuel trans.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,740 Answers

Hi and welcome to FixYa, I am Kelly.

Most all GM vehicles reset the "change oil light" in one of 2 ways:

See this link because it does the best to describe the steps and would rather the author got the credit writing the article:
http://www.ehow.com/how_4663244_change-oil-light-gms-chevrolet.html

If this does NOT work for you respond here and I will dig deeper noting you have the CAT engine. It is in the owners manual but if you are not the original owner you may not have the manual.

Thanks for choosing FixYa,
Kelly

Posted on Mar 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Reset oil change light on 2004 Oldsmobile Alero or Bravada w/o (DIC) Driver...


I see alot of people cant figure out how to reset there oil change light on a 2004 Oldsmobile Alero/ Bravade w/o (DIC) driver information center. To do this follow the steps below.
Turn the ignition to ON, with the engine off. Fully depress and release the accelerator pedal slowly three times within five seconds. The reset is complete when you hear the chimes and the “CHANGE OIL” light goes out. If the light stays on and no chime is heard, you will need to repeat the reset procedure. Turn the key to OFF. If the “CHANGE ENGINE OIL” message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.
and its as easy as that and now you can change your oil on your own and not need a dealership to reset it for you.

on Aug 31, 2010 | Oldsmobile Alero Cars & Trucks

1 Answer

Just had catalytic converter replaced. A week later the car developed a rattle while accelerating and the check engine light came on. Now the oil light is coming on while acceleratting


Sounds like the mechanic who changed the Cat Converter hit the wires to the oil sending unit or a metal shield on the engine that needed to be removed to replace the Cat was not put back properly and is so loose it is hitting the wire to the oil sensor... Get it checked out by a RELIABLE mechanic...

Dec 25, 2012 | 2004 Nissan Sentra

2 Answers

2004 Range rover Check Engine Light


The Range Rover actually has 4 oxygen sensors - 2 in front of the Cat and 2 behind the cat - try to check / replace the other 2

Dec 21, 2009 | 2004 Land Rover Range Rover

1 Answer

Service engine soon light on in 2004 buick rendevous after accident. no codes given. turns on when engine starts.ran scanner- no codes... had to reset everything after car repairs. told not related to...


oh thats the change oil light expect it every 3500 to 4500 miles they glow.. you can usually reset it by holding down the trip button with the car off and then turn the key to the II position where everything lights up
so read me >>>>>
Buick Rainier 2004-06, Buick Rendezvous 2002-05 w/o (DIC) Driver Information Center
Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three time in five seconds. If the CHANGE OIL SOON’ indicator flashes two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on for five seconds, repeat the procedure.
Buick Rainier 2004-05 wI (DIC) Driver Information Center
The DIC display is located on the instrument panel cluster above the steering wheel. The DIG buttons are located on the steering wheel. Press button with the gas pump symbol to display engine oil life. Press button with the arrow symbol to reset engine oil life display.
Buick Rendezvous 2002-06 wI (DIC) Driver Information Center
To reset Service Reminder Indicator, turn ignition on with engine not running. Press the MODE button until DIC reads oil life left hold SET to reset. Press and hold the SET button until 100% is displayed. You will hear three chimes and the change oil message will go out. If the CHANGE ENGINE OIL’ message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.

May 08, 2009 | 2004 Buick Rendezvous

1 Answer

I changed my oil on my LX and the change oil warning is not reset


RESETTING THE ENGINE OIL LIFE INDICATOR
On LX and EX models

If maintenance is done by someone other than your dealer, reset the maintenance minder as follows:

1. Turn the ignition switch to ON ( II ).

2. Press the SELECT/RESET knob until the engine oil life indicator
is displayed.

3. Press the SELECT/RESET knob for about 10 seconds. The engine oil life indicator and the maintenance item code (s) will blink.

4. Press the SELECT/RESET knob for more than 5 seconds. The maintenance items code (s) will disappear, and the engine oil life indicator will reset to "100".

Jan 01, 2009 | 2004 Honda Odyssey

2 Answers

Light indicator


stop by a checkers or autozone and let them check for codes . go from there. thanks.

Dec 30, 2008 | 2005 Dodge Ram 1500

2 Answers

Oil and service lights


you most likely need to take the cat to a saturn dealership to have the code reset for the oil change light. Saturn is notorious for designing their cars so that it is necessary to the dealership for repairs.

Oct 10, 2008 | 2005 Saturn ION

2 Answers

2004 Nissan Murano How do you clear maintenance light after oil change?


press maintanence button until you see engine oil, then hold trip/reset button... :)

Oct 03, 2008 | 2004 Nissan Murano

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,412 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...