Question about 2000 Toyota Sienna

1 Answer

Have a Year 2000 Toyota Sienna. Engine won't be started after 3 misfires at 1, 3, and 6. Need help to find a solution. Thanks.

Posted by on

  • xiaop_2000 Mar 21, 2011

    Thanks a lot. I'll start from checking the sparks.. Hopefully it can be started in some point and can be driven to local service station.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 376 Answers

Here are a couple of suggestions if it ran before this problem.Check to make sure that your getting spark to those cylinders.If your getting spark then the next would be have the camshaft and crankshaft sensors tested to make sure that they are operating properly.Since there electrical they should be tested by a local service station since the electrical values are different for each vehicle.If they are operating ok then I would have your injector system balance tested for proper operation.

Posted on Mar 21, 2011

  • xiaop_2000 Mar 21, 2011

    Thanks a lot. I'll start by checking the sparks and hopefully it can be started at some point so I can drive it to local service station...

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

First start any day is a nightmare. My 2000 toyota sienna hardly starts the first time i try to start. after going around, there is no problem starting. Any advice what is wrong?


Might be fuel pressure leakdown. Try turning the key to RUN for about 3-seconds, but not START. Then turn to OFF. Repeat 3 times and then try to start. If it starts, you have a bad check valve in the fuel pump that's allowing fuel pressure to drain down overnight. Replace fuel pump.

If that doesn't work, try depressing the gas pedal halfway while cranking the engine. If that helps, check out the engine coolant temp sensor. A sensor that's out of calibration will send bad info to the computer and the computer will provide too lean a mixture for a cold engine. Depressing the pedal overrides the sensor and the computer adds gas.

Aug 01, 2017 | 2000 Toyota Sienna

1 Answer

2000 toyota sienna got code p1190 and multi misfires.changed spark plugs and wires and all 3 coils.


perhaps you have a timing issue that only a good mechanic can correct . like valves got bent , etc

Dec 07, 2015 | Toyota Cars & Trucks

1 Answer

P1190 code 2000 toyota sienna


multi misfires can be from injectors --dirty and not squirting properly or low fuel pressure ---fuel pump or dirty filters
plugs are only half of a misfiring problem and the injectors are always left out
Next time include all details like make, model , year of car in your question to get a better answer

Dec 07, 2015 | Cars & Trucks

2 Answers

Obd2 port not working 1999 toyota sienna


Run for 3-4minutes thn turn off n disconnect nevative battary lead 4 5minutes thn connect nevative battery lead n try tht 50-50

Apr 01, 2014 | 1999 Toyota Sienna

1 Answer

My 2006 toyota sienna DVD player won't shut off


Engine room Junction Box - on left side of Engine Compartment (Drivers side in USA) - Fuse RAD 1 (20A), Fuse RAD 3 (30A) - there is another fuse that goes to your ECU, it works with the radio, but you won't need to pull it. In case you do - it is Fuse ECU-B (10A)

Oct 14, 2013 | Cars & Trucks

1 Answer

Serpantine belt diagram 2000 sienna


For serpentine belt replacing and diagram details,click the link below:----http://schematicsdiagram.blogspot.com/2011/12/2000-toyota-sienna-serpentine-belt.html
---------This will help.Thanks.helpmech.

Dec 18, 2011 | 2000 Toyota Sienna

1 Answer

I have a 1998 toyota sienna with 132,000 miles on it. Recently I noticed a "shuddering" or hesitation while driving that was intermittent at idle and driving. The check engine light came on...


my name is Jerry Tiet. Base on my experience on 1998 Toyota Sienna with the DTC P0303 show there is a misfire in cylinder #3. a possible cause is the ignition coil of the #3 cylinder. Compare the resistance value of the ignition coil of cylinder #3 with the other coil or simply switch ignition coil #3 with one of the other ignition coil and clear the DTC with the scan tool. Then run engine for couple days. If the check engine light on again. Let me know what is the DTC code.

Nov 11, 2010 | 1998 Toyota Sienna

1 Answer

Need Detailed Diagram for Audio Wiring In 2000 Toyota Sienna


2000 Toyota Sienna Stereo Wiring Constant 12V+ Blue/Yellow Switched 12V+ Gray Ground Brown Illumination Green Dimmer n/a Antenna Trigger Black/Red Antenna Right Front Front Speakers 6 1/2" Doors Left Front (+) Pink Left Front (-) Purple Right Front (+) Green Right Front (-) Blue Rear Speakers 6 1/2" Side Panels Left Rear (+) Black Left Rear (-) Yellow Right Rear (+) Red Right Rear (-) White

Apr 04, 2010 | 2000 Toyota Sienna

Not finding what you are looking for?
2000 Toyota Sienna Logo

Related Topics:

317 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...