Question about 2006 Chrysler PT Cruiser

2 Answers

How to clean seats

I have an 06 pt cruiser and I need to find out how in the world to clean the seats with its cloth? Any liquid will stain even water. It leaves a permanent area and I need to find out what cleaner can I use. thank you
Stacey

Posted by on

  • mslee28 Oct 15, 2008

    I also have a 2006 PT Cruiser with cloth seats and even plain water will stain and leave a stain circle. What's up with that? What can I use to remove the stains?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

I ALSO HAVE A 2006 PT AND WORK FOR A CHRYSLER DEALER. THEY USED THIS MATERIAL IN PT AND JEEP AND IT IS TERRIBLE TO CLEAN. THE ONLY PRODUCT THAT WE FOUND THAT WORKS IS WOOLITE CARPET CLEANER IT IS CARRIED BY WAL-MART IN A GRAY SPRAY BOTTLE AND SAYS PET + OXYGEN ON THE LABEL. IT IS WITH CARPET CLEANERS NOT AUTO. YOU NEED A MEDIUM BRISLE BRUSH AND NEED TO DO THE COMPLETE SEAT YOU CANNOT SPOT CLEAN THESE IT MAKES IT WORSE. AFTER THERE ALL CLEAN AND DRIED GOOD ADD A COAT OF FABRIC PROTECTOR IT WILL KEEP THEM CLEAN A LITTLE LONGER

Posted on Oct 22, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 2,039 Answers

By a foam base cleaner go to the service station that have a shop vac apply the foam rub and remove with shop vac thank pierre

Posted on Aug 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the starter relay for a 2006 pt cruiser


    2006 wont start, battery is good - PT Cruiser Forum

    www.ptcruiserlinks.com > ... > Tech & Performance Forum

    Sep 22, 2010 - 10 posts - ‎2 authors
    Is it possible that is the starter relay? I didnt even realize it had one until I started looking online. Where would the starter relay be in the engine ... Having issues with my starter relay.
    2 posts
    May 20, 2014
    Starter not engaging
    8 posts
    Apr 28, 2011
    06 PT: Starter relay?
    10 posts
    Jan 28, 2011
    2006 PT Cruiser GT won't start - PT Cruiser Forum
    10 posts
    Sep 8, 2009
    More results from www.ptcruiserlinks.com images for where is the starter relay on a 2006 pt cruiser

Jan 25, 2016 | Cars & Trucks

1 Answer

Can anyone.tell me the Torqe specs for a 2004 or cruiser


Head and Cam Bolt Torque specs? - PT Cruiser Forum

www.ptcruiserlinks.com > ... > Tech & Performance Forum

Nov 5, 2012 - 2 posts - ‎2 authors
I am putting everything back on after replacing the head gasket. I was wondering what the Torque Specs and Sequences are for both the Head ... Torque Specs
10 posts
Jul 28, 2012
Valve cover torque specs
5 posts
Jul 4, 2011
Timing Repair Project - Bolt Torque Specs
7 posts
Jun 16, 2011
torque specs?
9 posts
Mar 20, 2006
More results from www.ptcruiserlinks.com

Dodge Stratus / Chrysler Pt Cruiser / Sebring Camshafts ...

? 5:07
https://www.youtube.com/watch?v=2wB2o27eWgo
Aug 20, 2015 - Uploaded by World Mechanics
Dodge Stratus / Chrysler Pt Cruiser / Sebring Camshafts Install and Torque Specs 2.4 Engine. ... 2004 Chrysler PT CruiserCamshaft Install

Dodge Stratus / Chrysler Sebring / Pt Cruiser 2.4 Head ...

? 6:08
https://www.youtube.com/watch?v=7rY7tDbye-8
Aug 16, 2015 - Uploaded by World Mechanics
... Stratus / Chrysler Sebring / Pt Cruiser 2.4 Head gasket Install and torque specs We took this video to ... 2004 Chrysler PtCruiser head gasket

Jan 18, 2016 | Cars & Trucks

2 Answers

I have a 2003 pt cruiser the air bag light stays on , code for open driver's door retractor, clean connector and check wires, light went out till next start up the light came back on , removed con


The seat belt switch cannot be adjusted or repaired and, if ineffective or damaged, the entire front seat belt and retractor (drivers side) must be replaced.
For more details on this issue,click the link below:-----
http://technoanswers.blogspot.in/2012/06/pt-cruiser-seat-belt-and-retractor.html

-------
This will help.
Thanks.

Jun 25, 2012 | Cars & Trucks

1 Answer

2004pt cruiser with rough idle but drives good


I had same problem...Clean thottle body...Take hose from air cleaner off,two silver clamp...Take cover off throttle cable,open butterfly,wet cloth with carb cleaner,Wipe inn side,clean soot out...Done....I have 2004 PT 26000 all city miles

Nov 16, 2011 | 2004 Chrysler PT Cruiser

1 Answer

My pt cruiser 06 2.8 turbo started leaking oil?


OK, anytime oil gets into the cooling system or vice versa, there's a strong possibility that there is a leak at the head gasket.

Could have to do with overspeeding the engine.

The cooling system can get up to 14 to 16 psi, enough to burst into the oil lines which run next to the cooling lines in the head and block.

If it's spilling on the front driver's side of the car, then you have some serious problems with this engine.

Jul 31, 2010 | 2006 Chrysler PT Cruiser

2 Answers

2002 pt cruiser overheating was told i need a new raditor and thermostat for 1 grand sounds fishy


Flush rad & change coolant & thermostat. Check operation of rad fan, & make sure it is coming on when engine reaches normal operating temperature. Be sure to bleed air out good when refilling rad/cooling system. Start engine & turn heater on when refilling & let rad fan come on & off at least 2 or 3 times before putting cap back on rad, and refill rad as needed as you do this. then fill return bottle to proper level & see what happens.

Jun 27, 2009 | 2002 Chrysler PT Cruiser

2 Answers

I find that the seats do not clean very well ..is there a secret to cleaning this "material" without leaving water spots or stains


if they are cloth cleaning them is very tough, i usually get a profecional to do it but if its not so bad you can rent out a carpet cleaning machine from your local supermarket or hardware store, it works quite well on car seats and carpet

Jun 14, 2009 | 2005 Chevrolet Equinox

Not finding what you are looking for?
2006 Chrysler PT Cruiser Logo

1,087 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

63456 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...