Question about 2000 Chrysler Concorde

1 Answer

2000 concord turn signal lights stopped working

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 38 Answers

It can be a multitude of problems.

Is it the front or the back?
If it is the front or and you have the ability to get it out, does it have the appearance of being "burnt-out" (be careful to never touch an electrical system on a car without disconnecting the battery first and letting it cool down). Without touching the bulb itself (the oil from your fingers can cause the bulb to burn out) inspect the area around the socket of the bulb and make sure it is tight. If it is and still will not turn on after making sure it is tight, remove the bulb after it cools down, take the bulb and users manual to the closest auto dealer and find a replacement bulb. If it still doesn't work. Talk to the sales associate at a place such as AutoZone or Oreillys. They can show you the ins and outs of your car.

Posted on Mar 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change a turn signal relay on a 2000 Chrysler Concorde


The Combination Flasher, also referred to as the combo-flasher, is mounted to the in-line bracket which is located to the right of the Junction Block. The flasher can be removed by pulling in a rearward direction. The left under panel silencer duct must be removed to access the flasher. The combo-flasher is black in color for ease of identification.
The Turn Signal and Hazard Warning Flasher is combined into one unit called a Combination Flasher (Combo-Flasher). The combo-flasher controls the flashing of the hazard warning system and the turn signal system. An inoperative bulb or incomplete turn signal circuit will result in an increase in flasher speed.

Ref: http://www.10w40.com/questions/auto-repair-questions/where-is-the-flasher-relay-on-a-2000-chrysler-concorde
Good Luck

Mar 03, 2015 | 2000 Chrysler Concorde

1 Answer

Left turn signal stops working


Had simular problem with wife 2000 Jeep Cherookee.
My signal light were not working at all.Check flasher relay under steering colum

Nov 28, 2012 | 2000 Jeep Grand Cherokee

1 Answer

2004 concorde brake lights not working


I would check for voltage at the fuse and the brake light switch.
The power goes from the brake switch thru the turn signal switch.

Sep 16, 2012 | 2004 Chrysler Concorde

1 Answer

My 2000 Concorde turn signals don't work


Do your flashers work? If not it may be the flasher unit is bad. It is located under the dash on the drivers side on or near the fuse box. If the flashers work you may have a problem with the turn signal lever or the wiring connected to it.

Sep 11, 2012 | 2000 Chrysler Concorde

1 Answer

Turn signal no work at all


check the hazard warning light switch as this is often the most common fault ,the switch stops working ,turn indicators on and have a play with the hazard switch

Apr 08, 2012 | 1995 Chrysler Concorde

1 Answer

2000 chrysler concorde turn signal/hazards don't work fuses good changed multifunction switch still no go whats next?


I am having the same problem with my 1999 chrysler concorde amoung other problems. But they will work at times and then they will just stop for no reason. Have you found any solutions yet?

Aug 24, 2011 | 2000 Chrysler Concorde

1 Answer

'99 chrysler concorde turn signal lights are not working...i replaced the bulbs, checked the fuse...still nothing


If the turn signal lights come on but do not flash, the flasher relay is defective. If the lights will not come on, there is a loss of power so check the fuse as you have already done and replace it even if it looks good. See if you have voltage at the fuse.

Oct 28, 2009 | 1999 Chrysler Concorde

1 Answer

I have a 2000 chrysler concorde that the engine light just popped on - the error codes are po302, po420, po340


P0302-cylinder #2 misfire detected
P0420- catalyst efficiency below threshold bank 1
P0340-No cam signal at PCM.
The Cam sensor most likely needs to be replaced first. Clear the codes after that and drive and see what comes back on.

May 29, 2009 | 2000 Chrysler Concorde

Not finding what you are looking for?
2000 Chrysler Concorde Logo

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...