Question about 2001 Ford F350 Super Duty SuperCab

1 Answer

Hi have a Ford F 350 Diesel 2002 The engine just stopped Fuel pump works when separate power connected, but it does not work with ignition on. When I run the pump forced it comes up diesel But it seems that it will not come out to the injectors Regards Gunther

Posted by Anonymous on

  • yadayada
    yadayada Mar 21, 2011

    Are you aware the pump only runs/has power for one second unless the engine is starter or the engine is cranking over. Your testing must take this into account.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 142 Answers

Check your alternator if it is charging service your fuel filter drain the water with the yellow tab make sure you didnt put regular gasoline in it. check your fuel inertia switch. check the fuses. make sure your fuel isnt gelling if so use power service diesel treatment emergency red bottle. Check your power to the fuse panel. check all fuseable links.

Posted on Mar 21, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I bleed diesel fuel system from air , due to changing fuel filter,from Ford transit van 135 T 350.


Hi, You need to connect a hand priming pump between the fuel supply pipe & the fuel filter keep squeezing the pump until it becomes firm. continue squeezing the priming bulb durin engine cranking.

Nov 25, 2014 | Ford Cars & Trucks

1 Answer

Truck just died at stop sign a block from home and will not start


assuming the vehicle is a diesel because you say you drained the water separator ? What engine ? What fuel pressure does it have to the injectors ? Do the injectors fire ?
Ford 7 3 powerstroke crank no start due to low icp injection pressure...
Do you know how to trouble shoot diesel engines ? Your best bet take it to a qualified repair shop .

May 06, 2017 | 2008 Ford F-350 Super Duty

1 Answer

Replaced engine in bobcat. It a diesel, and I know nothing about Diesel engines. There is only two wires coming from the injector pump. That's it. I bleed all the air out of the lines and it still won't...


Not sure about that particular engine - but one of the thing that needs to work, assuming the timing and compression etc are good, on a diesel engine in order for it to work is the fuel solenoid. It has to have 12v of power to it in order to let fuel pass to the engine. When power is turned off the valve shuts and stops all fuel. It is located on the injector pump and will have one hot wire when the ignition is on. You can hear and feel it click open with the ignition turned on/off.

You also need power going to you glow plugs prior to turning it over - check you are getting power to the plugs with the ignition on(power should come one for 5-15 seconds or so and then turn off), a simple test light works to test power - I have also installed an engine that had all four glow plugs that were bad, if it is a used engine I would just change these so you know. You may have power to the glow plugs, but that doesn't mean the plugs themselves are good.

If you have this working properly try using a low volume inline fuel pump before the injector pump just to get it primed and running.

Sep 20, 2013 | Isuzu Cars & Trucks

1 Answer

2001 mustang fuelpump not turning on, low power to it from harness thru trunk


To troubleshoot the issue, i suggest you few help links with accurate solution step by step:---
-------------

Fuel pump not running?
http://schematicsdiagram.blogspot.in/2012/02/fuel-pump-not-running.html
-----------

Fuel pump not working on 1991 Ford Ranger?

http://technoanswers.blogspot.in/2012/01/fuel-pump-not-working-on-1991-ford.html

------------

Fuel pump has no power on 2002 ford 350 7.3 diesel?

http://technoanswers.blogspot.in/2012/01/fuel-pump-has-no-power-on-2002-ford-350.html

------------


Emergency fuel shut switch on Ford car?

http://schematicsdiagram.blogspot.com/2011/12/emergency-fuel-shut-switch-on-ford-car.html

---------------

How to jump fuel pump On Chevrolet Silverado 1500?

http://schematicsdiagram.blogspot.com/2011/12/how-to-jump-fuel-pump-on-chevrolet.html

---------------------


How to Increase gas mileage on 2011 2500HD Duramax 6.6?

http://schematicsdiagram.blogspot.com/2011/12/how-to-increase-gas-mileage-on-2011.html
------

How to test Fuel Pressure and replace Fuel Pump?

http://repairhelpcenter.blogspot.com/2011/11/how-to-test-fuel-pressure-and-replace.html
--------------------------

Fuel Running Lean

http://technoanswers.blogspot.com/2012/10/fuel-running-lean.html
------------

How to relieve fuel pressure?

http://technoanswers.blogspot.com/2012/01/how-to-relieve-fuel-pressure.html

---------------

Refueling problem?

http://repairhelpcenter.blogspot.com/2012/01/refueling-problem.html

-------

Toyota Tercel consuming more fuel?

http://repairhelpcenter.blogspot.com/2012/01/toyota-tercel-consuming-more-fuel.html

---------

How to maximize fuel economy on your vehicle?

http://schematicsdiagram.blogspot.com/2011/11/how-to-maximize-fuel-economy-on-your.html

-------

Fuel gauge jumps from empty to full?

http://schematicsdiagram.blogspot.com/2011/12/fuel-gauge-jumps-from-empty-to-full.html

------------

Gas gauge stuck on empty on 2002 Mercedes Benz 240c?

http://repairhelpcenter.blogspot.in/2012/02/gas-gauge-stuck-on-empty-on-2002.html

------------------

No power to the control side of the fuel pump relay?

http://schematicsdiagram.blogspot.com/2011/12/no-power-to-control-side-of-fuel-pump.html

--------------

These will help.

Thanks.

Dec 06, 2012 | 2001 Ford Mustang

1 Answer

SYSTEM WONT BLEED


diesel engines high pressure pumps not suppose run dry.diesel fuel keep high pressure pump cool and lubricated.problem could be fuel pressure regulator in the fuel filter water separator housing.replace fuel filter see if it helps problem could be fuel pressure regulator in fuel filter housing, the fuel pressure regulator has a air bleed orifice that allows vent to the fuel tank.make sure fuel pump fuse okay pump getting power. i would let garage or dealership check it out if all fails because your diesel engine fuel timing is pcm controlled if let fuel system go dry you probably have to have fuel injection timing reset or could have damage high pressure pump letting it run dry i hope thats not the case because high pressure pump not cheap part i hope it not that.

Sep 17, 2012 | 2008 Ford F-350 Super Duty

1 Answer

Hi, I have a 1992 Ford F-350 commercial box truck. It's been seating for approx. 3 yrs. I drained the two fuel tanks cause gas smell bad. Put In fresh gas but I get no fuel rail fuel presser reading....


YOUR PROBLEM IS MOST LIKELY,DUE TO BAD FUEL AND SITTING FOR A LONG TIME, YOUR FUEL PUMPS. I AM ASSUMING THAT THE TRUCK IS REGULAR GASOLINE FUEL AND NOT DIESEL. ENGINE. MOST FUEL PUMPS IN THE TANK WILL FAIL IF FUEL IS ALREADY GUMMED OUT, FUEL WILL SMELL LIKE "TURPENTINE" FLUID. CHECK FUEL PUMPS IF THEY COME ON FIRST BY OPENING THE FUEL CAPS AND HAVING ANOTHER PERSON TURN THE IGNITION KEY TO THE "ON" POSITION, AT THE SAME TIME PUT YOUR EAR CLOSE TO THE FUEL FILLER TUBE OF THE TANK THAT THE FUEL TANK SWITCH IS ON. YOU SHOULD HEAR A LOW GROWLING SOUND, IF NO SOUND COMING FROM THERE PUMP IS NOT WORKING. SOMETIMES (VERY RARE) YOU CAN JAR THE PUMP TO WORK BY BANGING ON THE BOTTOM OF FUEL TANK WITH A RUBBER MALLET, DO THIS AS SOON AS THE IGNITION KEY IS TURNED TO THE "ON" POSITION.

Jul 01, 2011 | 1992 Ford F350

2 Answers

2006 ford f350 deisel turns over wont start unless i use starting fluid it then runs great. changed fuel filter oil filter and oil, wrench symbol came on went into engine fail safe mode, said something...


the diesel engine is a 6.0L or a 6.4L? because the 6.0L don't use electronic throttle control. they control the demand of diesel threw the high pressure oil system they have a sensor call injector pressure regulator. this sensor is responsible of maintain the proper pressure in the high pressure oil system so that the engine could start . i also suggest you to check if it is any leak on the high pressure oil system or if the low pressure system is delivering the pressure required for the high pressure system to work properly. to do that you most have a scan tool. also you can check the pressure of the diesel pump that its in the chassis to eliminate the high pressure oil system as the cause of your concern. if u don't have the proper gauges to check the pressure of the diesel pump you could remove the cap of the small fuel filter that is next to the oil filter remove the filter and put the ignition switch in the on position and see in the container if you have a fast or slow filling. if you encounter that the filling is too slow then your problem is with the fuel diesel pump that is on the chassis this pump is called HFCM, Horizontal Fuel Control Module

Jan 30, 2011 | 2006 Ford F 350 Super Duty

1 Answer

2003 ford f 350 diesel cannot get the engine to


CHECK ELECTRIC FUEL PUMP FUSE THAT SUPPLYS THE INJECTION PUMP FUEL.IF ALL IS GOOD.REPLACE FUEL FILTER AND AIR FILTER.MAKE SURE GLOW PLUGS AND GLOW PLUGS CONTROLLER IS WORKING. IF NOT. THAT WILL CAUSE NO STARTING PROBLEMS BIG TIME.

Sep 08, 2009 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

Won't start 2005 f350 diesel


NHTSA ID: 05V266000 Issued: 06/20/05 No. of vehicles: 00078675
Fuel system, gasoline:Delivery:Hoses, lines/piping, and fittings
on certain pickup trucks and chassis cab Vehicles equipped with 5.4L
or 6.8L gasoline Engines, the fuel jumper line may have an incorrect
end form.
The fuel line may separate at the connection to the main fuel
bundle. If the fuel line separates, an operator may notice a
gasoline odor and/or fuel on the ground, loss of power, and the
Engine will eventually stall. Fuel leakage in the presence of an
ignition source could result in a Fire.
Dealers will install an external retention clip at the fuel jumper
line to the main fuel bundle connection. The recall began on June
20, 2005. Owners should contact Ford at 1-800-392-3673.

Aug 26, 2009 | 2005 Ford F 350 Super Duty

2 Answers

2002 f350 wont start


i had to replace my oil pressure regulator sensor it contols the oil pressure required to have the injectors open and spit fuel, if you replaced it and still no start replace the the cam position sensor

Jul 20, 2008 | 2002 Ford F350 Super Duty DRW Reg. Cab

Not finding what you are looking for?
2001 Ford F350 Super Duty SuperCab Logo

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...