Question about 2003 Mitsubishi Galant

1 Answer

How doyou change aheatercontrol valve on a 2003 galant

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 49 Answers

Well, I would take it to a shop, I attempted to replace mine but after removing most of the passenger side interior and realized I still was going to have a hard time getting to it. I put it back together and let the dealer fix it. I was approx $270.

For future reference I was told by the mechanic who fixed it to never turn the temp. knob all the way in either direction. He said the way the control is designed that if it is in either extreme position that it puts pressure on the gear teeth of the valve. One by one they break off and that clicking noise I heard for several months was the catch moving over the missing teeth. When the last one broke off it quit.

Posted on Mar 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i bypass heater core on a 2001 ford ranger edge 3.0 without bypass controll valve


to by pass a heater core just connect the two hoses to the heater core together with a connector and hose clamps.

Feb 20, 2015 | Ford Ranger Cars & Trucks

1 Answer

2003 Mitsubishi Galant 2.4 cylinder 3 misfire


on thesae oldr cars 2 and 3 cylinder fire together same as 1 aND 4 ,without head under the bonnet i honestly couldnt tell you the answer but i might be inclined to suspect a valve not seating correctly all the time

Mar 27, 2013 | 2003 Mitsubishi Galant

1 Answer

2003 Galant 4cyl .. After not knowing Car timing belt was what broke ..Car was attempted to turn on various times... How will I know if I have to re-built the engine ?


The Galant has an interference engine, when the timing belt breaks the valves stop and the pistons strike them. At the least you need a new head. There is really no way to tell how much damage was done without tearing the engine apart.

Sep 20, 2011 | 2003 Mitsubishi Galant

1 Answer

How do you change the plugs on a 2003 mitsu gallant 4 cyl


Your coils and spark plug caps are one in the same. You need to unbolt the coil/plug caps on top of the valve cover. Lift them out of the way and you will find the spark plugs underneath.

Oct 06, 2010 | 2003 Mitsubishi Galant

1 Answer

Doyou need to change the water pump when changing the timing belt on an 2003 rio L4 1.6 liter engine


as you have taken apart most of the front part of the engine you might just as well do the whole job.....personally i change my belts every 75k and do the pump at the same time,labour being the highest cost.

Aug 21, 2010 | Kia Rio Cars & Trucks

1 Answer

My 2003 mitsubishi galant has turned off while driving. It has started back up about 12 hours later.


hi i have just answered a similar question to this one, try checking the idle control valve and see it needs cleaning, common fault with these vehicles..hope that helps

Aug 06, 2010 | 2003 Mitsubishi Galant

1 Answer

Torque Spec


78 inch pounds

Nov 21, 2009 | 2003 Mitsubishi Galant

1 Answer

Where are the spark plugs on the Mitsubishi 2003 Galant ES 4 Cylinder engine?


Just behind the aluminum valve cover...where you pour in your engine oil.

Oct 07, 2009 | 2003 Mitsubishi Galant

1 Answer

2002 mitsubishi heater not working


approx. $200-250 - takes less than an hour to replace if that part is the problem

Jan 09, 2009 | 2003 Mitsubishi Galant

Not finding what you are looking for?
2003 Mitsubishi Galant Logo

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...