Question about 1989 Buick Skylark

Open Question

Could you tell me where the engine mounts are located on a 1989 Buick Skylark and how many there are? Also location of signal flasher on same model?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 333 Answers

SOURCE: Flashers Won't work

The turn signal flasher is in a clip attached to the base of the steering column support inside the car. That would put it just about in front of your knees in the drivers seat, up under the bottom edge of the knee panel. I hope this helps you.

Posted on Nov 23, 2008

emissionwiz
  • 75807 Answers

SOURCE: location of turn signal flasher for 1997 Buick skylark

the flasher is behind the dash where the steering column goes. It's hard to get at and harder to remove. They just can't make these things easy, can they?

Posted on Dec 02, 2008

jpstuhr
  • 49 Answers

SOURCE: turn signals and flasher problems

See Pic
8703010.jpg

Posted on Feb 13, 2009

  • 1 Answer

SOURCE: where is the turn signal flasher located on 1995 Buick Century

You have to take the gaurd off underneath the steering wheel to exspose the wires, You should see the fuse there.

Posted on Mar 16, 2009

  • 1 Answer

SOURCE: 1996 buick regal flasher location?

under dash near ashtray

Posted on Apr 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of the knock sensor on a 1992 Buick Skylark


Here's a link Jon to your knock sensor removal. SAVE 20 ON ONLINE SHIP TO HOME ORDERS OF 100 OR MORE

1992 Buick Skylark 2.3L MFI SOHC Quad 4cyl

The Knock Sensor is located: Under hood, driver side, upper engine area, below exhaust manifold, mounted in engine block

Jul 18, 2015 | Buick Cars & Trucks

1 Answer

Re: 1989 Oldsmobile cutlass supreme turn signal flasher unit location, any photos to support the location.


Flashers

Print
The turn signal flasher is mounted in a clip on the right side of the steering column support bracket. The hazard flasher is located in the component center, under the instrument panel, on the right side. Replace the flasher by unplugging the old one and plugging in the new one.

May 25, 2015 | 1989 Oldsmobile Cutlass Supreme

1 Answer

The turn signal flasher dont work,but the hazard lights work. i want to know where is turn signal flasher,where is this are found.


That would depend on your model make and year of vech. Also depending on vech., most vech's. use the same flasher for t signals and flashers. To hazard a guess, you may have a bad t. switch or wiring problem.

Mar 10, 2015 | 1989 Buick Skylark

1 Answer

Turn signals dont work on 1989 buick skylark,hazard lights work good.


the turn signal flasher is bad. it looks like the hazard flasher and only works the signals.

Mar 10, 2015 | 1989 Buick Skylark

1 Answer

Where is the signal flasher in a 1989 buick skylark,i know where the hazard flasher is.


Here you go Tom , The Flasher is located: Front seating area, driver side, under dash, above fuse block, mounted on kick panel
Application:
Turn signal

Mar 10, 2015 | 1989 Buick Skylark

1 Answer

The brake lights work but the turn signals don't!! Have checked the fuses and bulbs, but not finding the problem


Fuses and bulbs OK, but wires? Additionally I suggest keep in mind that turn signals work with FLASHER devices (two independent) on 1993 Buick Skylark..

Application: Turn signal
Flasher is located: Front seating area, driver side, under dash, driver side of steering column, mounted on support bracket

Application: Hazard flasher
Flasher is located: Front seating area, driver side, under dash, above kick panel, mounted in top of convenience panel

Hope this helps (remember to rate and comment this answer).

May 14, 2011 | 1993 Buick Skylark

3 Answers

Turn signals dont work on 1993 skylark. all bulbs are good. hazard lights blink fine. turnsignal dash light stays green and doesnt blink


There are 2 separate flasher relays. 1 for the turn signals and one for the hazards. I believe you have a bad flasher relay for the turn signals. The location of that is in the front seating area on the drivers side, under the dash on the drivers side of the steering column, mounted on support bracket. I provided a picture of what it should kind of look like although the picture I gave you is an aftermarket one so the color and such may be a little different but will look the same. Don't get it mixed up with the hazard relay which is located in the front seating area on the drivers side under the dash above the kick pane lmounted on top of the convenience. I am almost 100 percent sure the flasher and hazard relay are the same so if you want to just swap them out in order to have turn signals that should work. You won't have hazards however. I hope this helps you and good luck.


clifford224_215.jpg

May 07, 2011 | 1993 Buick Skylark

1 Answer

Where is fuse for blinkers on 1989 buick skylark


REPLACEMENT The hazard flasher is located forward of the console on all N-Body vehicles. The turn signal flasher is located behind the instrument panel, on the left side of the steering column bracket. Replace the flasher by unplugging the old one and plugging in the new one. Confirm proper flasher operation.

The flasher is located behind the dash (trim removed for clarity)


b8a3d29.jpg
PLEASE DON'T FORGET TO RATE!

Jul 15, 2009 | 1984 Buick Skylark

2 Answers

Location of turn signal flasher for 1997 Buick skylark


the flasher is behind the dash where the steering column goes. It's hard to get at and harder to remove. They just can't make these things easy, can they?

Dec 02, 2008 | 1997 Buick Skylark

1 Answer

Flashers Won't work


The turn signal flasher is in a clip attached to the base of the steering column support inside the car. That would put it just about in front of your knees in the drivers seat, up under the bottom edge of the knee panel. I hope this helps you.

Nov 23, 2008 | 1992 Buick Skylark

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...