Question about 1993 Chevrolet S-10

1 Answer

Clunking when shifting gears (standard trans)

Posted by on

  • mr-fixit37 Sep 18, 2008

    my automatic trany clunks when it changes gears from take off to the next gear right around 2200rpm's doesn't matter if you baby it or jack rabbit it.it amost "feels " like a u-joint going out but it's frt.wheel drv. It has a 6 cyl.180,000+ miles on it.

×

1 Answer

Have you checked your u joints?

Posted on Oct 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My transmission is clunking and grinding when I shift from park to reverse to drive


Does engage and drive normally? Because they only grind when you don't stop completely, gear grind. It is different to normal trans clutch plates engaging while you're riding on the brakes while shifting, they do make the 'clunk' - engaged - and then as you release the brake it grinds 'er er er er'.
So unless your trans doesn't drive normally, I'd say it's normal.

Apr 29, 2014 | Cars & Trucks

1 Answer

My 2003 Windstar seems to have what I am terming "loose" transmission. Must be very careful and deliberate (slow) when shifting gears. Lots of the time it will make the clunking sound when it...


you could try a transmission service, but what your are describing indicates a dirty or clogged throttle body. Try to have a facility that does a trans service to do a complete flush of the trans, and refill with Mercon V. If you let this go much longer you will end up replacing the trans.

Aug 06, 2011 | Ford Windstar Cars & Trucks

1 Answer

I have a 1994 gmc yukon and im having trans issues just changed the trans pan and seal thinking dirty fluid. Well it manual shift 1-2 than over drive than it seems its over idling and like im in...


you are right to think it is a sensor. trash can get into the shift solenoids and make a trans act funny. you could drop the pan and replace the solenoids located in the back of the valve body.

Jul 16, 2011 | GMC Yukon Cars & Trucks

3 Answers

When put my automatic 2001 Saturn SL1 into reverse it makes a Loud clunk noise before it reverses also it clunks before accelerating into the next gears..? why?


2001 Saturn SL1. Transmission (automatic) shifts hard when putting it in gear and every gear there after. The only codes I get is PO442 and PO410. Any help would be greatly appreciated.

Jul 08, 2010 | 1999 Saturn SL

1 Answer

1997 Cadillac Seville transmission does not engage any gears


it sounds like the problem started with the brake shift iterlock switch by forcing it he now broke the trans shift cable mech at the column

Mar 10, 2010 | 1997 Cadillac Seville

2 Answers

1997 ODYSSEY AUTO TRANS SHIFTS HARD BETWEEN 1st & 2nd, 2nd & 3rd


It has nothing to do with the transmission, it's your engine mount thats bad.

Jul 27, 2009 | 1997 Honda Odyssey

Not finding what you are looking for?
1993 Chevrolet S-10 Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...