Question about 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Brake and rotor replacement 2002 dodge ram sport 4 wheel drive

Was trying to find a manual i could look at to see what all i need to do to repalce all four rotors and brakes on my 2002 dodge ram sport 4 wheel drive. can seam to find anything on here that i dont have to pay for do i you know whare i can get something to look at and maybe print off ? thatnks Rob rockwell Vienna IL.

Posted by on

1 Answer

Autozone.com has free online manuals

Posted on Sep 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will not go in to four wheel drive


Dodge Ram 1500 Questions - 4WD not engaging all the ...

www.cargurus.com > Questions > Dodge > Ram 1500

CarGurusOct 18, 2013 - to get it into 4LOW is to 1st get it into HI and then stop and shift it intoLOW. ... I have a 98 Dodge Ram 1500 that I can not get the 4 wheel drive to ... what web site can i go to so i can see how the inside looks on timing gears.

Diagnosing 4WD Engagement Problems on Dodge Ram ...

dodgeram.org > Main > Tech > Maintenance
Nov 1, 2000 - This shift will be easier if you momentarily release the accelerator pedal. Apply a ... Do not attempt to shift to or from 4L while transmission is in gear or clutch is engaged. ... OK, now when you shift into 4WD it gets a little more complicated. .... I have a 97 RAM 1500 Club Cab Sport 4 X4 and I am having

2008 Dodge Ram 1500 Won't Engage 4 Wheel Drive: 20 ...

www.carcomplaints.com/Dodge/Ram_1500/.../drivetrain/wont_engage_4...
Ram 1500 Won't Shift Out Of 4 Wheel Low - Ram got locked into 4 wheel low. Found this ..... It would not go into full time 4 wheel drive or go into 2 wheel drive.

Software Update and Axle Disconnect Actuator ... - RepairPal

repairpal.com > Problems > Dodge > Ram 1500

Feb 08, 2016 | 2004 Dodge Ram 1500

1 Answer

How to change parking brakes on 2003 dodge ram


  • 1 Determine which type of emergency brakes your Dodge Ram will need. Emergency brakes typically function by activating the regular braking system on the driving wheels. The emergency brakes for the Dodge Ram have used rear disc brakes since 2001.
  • 2 Release the parking brake pedal completely and raise your vehicle. Remove the tire and wheel with a socket wrench and disconnect the brake caliper from the caliper adapter. Slide the rotor from the axle shaft.
  • 3 Install the new brake rotor onto the axle shaft and complete the installation by reversing the removal steps.
  • 4 Tighten the wheel mounting nuts in the proper sequence with a torque wrench until the nuts are torqued to 47.5 foot/pounds Repeat the tightening sequence to torque the nuts to 95 foot/pounds.
  • 5 Apply and release the park brake pedal to seat and adjust the parking brake cables. Road test the vehicle to ensure the vehicle's brake system is functioning.
  • 6 Place tool C-3919 or the equivalent over the park brake shoes and use the star wheel adjuster to lower the park brake shoes until the lining just touches the jaws on the tool.


  • Read more : http://www.ehow.com/how_4521030_replace-emergency-brakes-dodge-ram.html

    Dec 31, 2014 | Dodge Cars & Trucks

    1 Answer

    2002 Dodge Ram 2500 4X4, all 4 brakes locked up.


    that's odd ,try disconnecting the vacuum hose at the booster chamber and see if they release,had a truck do that once,the master cyl.seal at the booster failed and the brakes were applied.

    Dec 10, 2013 | 2004 Dodge Ram 2500

    1 Answer

    I need to know what is wrong with my dodge ram 1500 . When I brake the truck squeals and its not my brake pads cause they look like new .


    Did you install Dodge Replacement pads or aftermarket? With the size of the rotors and pads on your Ram it is not uncommon for aftermarket pads to have squeal. Did you install and use the anti-squeal material that should have come with the pads?

    May 15, 2012 | 2007 Dodge Ram 1500 Quad Cab Sport

    1 Answer

    Woking on my 2002 Dodge one ton dually 2 wheel drive. Brake pads had gotten really worn, to the metal and damaged the rotors. As I haven't used the truck much I put off the repairs. Recnelty I repalaced...


    Hello
    It sounds like you have a weak master cylinder.
    If there is no air in the system or you cant get the air out it is the master cylinder i would do next. Let me know if you need instructsions on replacemint or bench bleeding of the new part!
    Thanks

    Jul 14, 2010 | 2002 Dodge Ram 3500 Truck

    1 Answer

    Cant get the rotor off of a 99 , any suggestions


    Remove the brake caliper, and caliper holder if it goes over the rotor. If it's 2 wheel drive, remove the center cap, take out the cotter pin. Remove the nut holding on the rotor. If it's 4 wheel drive, once you remove the associated brake parts, spray some WD-40 around the studs and the center of the rotor, try striking the rotor with a rubber hammer. Often the rotor will rust to the hub, on the 4 wheel drives. The 2 wheel drives, have the rotor with the hub for the bearings together, the 4 wheel drive has a "top hat" type rotor.

    Mar 10, 2010 | 1999 Dodge Ram

    1 Answer

    Removing the rear rotors


    REMOVAL - REAR ROTORS
    (1) Raise and support the vehicle
    (2) Remove the tire and wheel assembly.
    (3) Remove the disc brake caliper, (Refer to 5 -
    BRAKES/HYDRAULIC/MECHANICAL/DISC
    BRAKE CALIPERS - REMOVAL).
    (4) Remove the caliper adapter bolts (Fig.
    61).(Refer to 5 - BRAKES/HYDRAULIC/MECHANICAL/
    DISC BRAKE CALIPER ADAPTER -
    REMOVAL)
    (5) Remove the retaining clips and rotor assembly

    (Fig. 61).
    c0d28fd.jpg

    You can get a factory service manual from Promanuals.net here is a link to the 2004 Dodge Ram Service Manual it was only 20 bucks and very informative.

    Sep 29, 2009 | 2004 Dodge Ram 2500

    1 Answer

    I need a diagram on front hub and brake assembly for 1999 dodge 1 ton dually 2 wheel drive. the front brake rotor is warped i need to replace it


    8–Stud Rotor
    1. Raise and support the vehicle.
    2. Remove the wheel.
    3. Remove the hub extension.
    4. Remove the brake caliper assembly.
    5. Remove the axle nut cotter pin. Remove the axle nut.
    6. Disconnect the ABS wheel speed sensor wire from under the hood. Remove the sensor wire from the frame and steering knuckle, if equipped.
    7. Back off the hub/bearing mounting bolts 1/4 inch each. Then tap the bolts with a hammer to loosen the hub/bearing mounting bolts.
    8. Remove the bolts and remove the hub/bearing assembly.

    Sep 16, 2009 | 2000 Dodge Ram 3500

    1 Answer

    2002 Dodge Ram 1500 4 w drive rear rotors


    Can't tell you exactly how because i don't know what axle you have, but usually just take the main nut in the center off will bring it right out. Remove the wheel, and the brake calliper first and see if it comes off then remove the center nut.

    Mar 20, 2009 | 2001 Dodge Ram 1500 Truck 2WD

    6 Answers

    Pull to the left, Brakes


    Sounds like it was pulling before the brake job...if so the only thing you didn't replace was the rotors, I assume you turned them? and did you see hard spots on the rotor? discolored area that didn't cut the same......switch the rotors left to right and see if the problem moves or just replace them if they've been cut twice.

    Nov 30, 2008 | 1999 Dodge Ram 2500 4WD

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    254 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts

    yadayada
    yadayada

    Level 3 Expert

    61168 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6812 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...