Question about 2001 Chrysler Town & Country

1 Answer

How do you get the cover off the blower motor of a 2001 chrysler town & country?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Chrysler Master
  • 680 Answers

It's not quite as simple as it seems. There are multiple hidden bolts and the plastic diverter to the passenger's side floor board is attached to the lower cover. It's a tedious process but the whole cover should be removed. Upper and lower. It's pretty much the only way to get to the 8 mm bolts on the inside that hold the diverter/door into place.

Posted on Mar 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Chrysler Town & Country air conditioner/heater blows on high only. We have replaced the front blower relay and it still doesn't work. The back blower is the same.


THE REASON THE BLOWER ONLY WORKA ON HIGH IS BECAUSE OF SOMETHING CALLED THE BLOWER MOTOR RESISTOR. THIS IS A BLOCK WITH ABOUT THREE DIFFERENT RESISTORS ON IT WHICH CONTROL THE AMOUNT OF VOLTAGE THAT REACHES THE BLOWER MOTOR THUS GIVING YOU YOUR DIFFERENT SPEEDS.
THIS BLOCK IS USUALLY LOACATED BEHIND THE GLOVE BOX AND IS BOLTED TO THE HEATER HOUSING.

Jun 09, 2010 | 2001 Chrysler Town & Country

1 Answer

1996 town & country van front heater blower


you will need to start by checking fuse,then power to motor,then blower motor resistor

Jan 29, 2010 | 2005 Chrysler Town & Country

2 Answers

Air conditioner only works on high 99 chrysler town and country van we change the switch and the motor and it still doen't work on lower settings


you need a blower resistor maybe a blower motor also but the resistor is for speeds and it usually goes when the blower motor starts to draw too much power the resistor is outside under the cowl on the passanger side you may need a connector pigtail also the dealer will have what you need

Sep 21, 2009 | 1999 Chrysler Town & Country

1 Answer

Cam sensor on 2001 Chrysler Town and country


depending on what size motor you have, the 2.4 has the sensor mounted on the rear of the cylinder head. the 3.3 & 3.8 engines have them mounted on top of the timing case cover, Good Luck!

Sep 19, 2009 | 2001 Chrysler Town & Country

1 Answer

2001 Town & Country lxi. Front blower worked last night but not this morning. Fuses and relays all OK (swapped known working etc) How to check beyond this? Power at blower motor? Where is blower motor?...


Ummm if the blower motor is bad it's a ***** to replace, I'd spring for a dealership repair to replace the motor
try this (But I doubt it) look under the hood on the firewall near the far right side, if you see the back of the blower motor, whack it with a hammer, this may work and it's tmporary at best, if you're very lucky the blower can be unbolted and removed on he engine side, but that's rare
Sorry

Aug 30, 2009 | 2001 Chrysler Town & Country

1 Answer

Describe your 2002 Chrysler Town &


first i will do to change the blower motor resistor and see what happen it is near the blower motor and see if any wires burned out

Jul 14, 2009 | 2002 Chrysler Town & Country

1 Answer

Where is the front blower motor on a 2004 Town & Country located and how do you get to it?


Behind glove box, look for cover over motor. Disconnect battery negative (-) first & wait a few minutes, (to avoid accidental deployement of airbag)then remove glovebox, and then you'll have access to cover on blower motor. Remove it, then motor. Why are you changing it if you don't mind me asking?

Jun 10, 2009 | 2004 Chrysler Town & Country

1 Answer

Heat/ac blower motor


ce the resister for blower motor.

Jun 05, 2009 | 2001 Chrysler Town & Country

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...