Question about 1997 Toyota RAV4

1 Answer

Wheels squeal when turning a corner and abs brake light comes on

Posted by on

  • vjuchau Aug 18, 2008

    What actually happened was that the differential lock button had been accidentally pushed. This was easily corrected.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My girlfriend had the same problem, though her car does not have abs, she took it to three different mechanics and none of them could find out what it was, i then had a look myself and when i removed the front wheel, i found that the split pin that holds the hub nut retainer had sheared off and the wheel nut was slowly coming loose, causing the brake disc to rub on the calliper intermitantly when turning, very dangerous situation you better go and have a look immediately.

Posted on Aug 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Abs light and esp light are on in my pegoet 308


If any of four abs sensors is not working then abs light comes up and subsequently affects car's stability (esp). OBD diagnostic scanner will find out that which sensor is causing it. If all sensors are fine then most probably there is a problem with your abs/esp unit in engine bay.
PEUGEOT announced a problem with the 308 vehicles and it has been identified that the operation of the ABS/ESP braking unit may be affected by the ingress of water. Previously, recall are announced to be affected vehicles to reinforce the resistance of the ABS/ESP unit to water.

Feb 11, 2015 | 2008 Peugeot 308 1.6

1 Answer

Abs for 2001 ford excape


The ABS is controlled from the sensors at the wheels . The sensors signal when the wheel stops turning and the ABS releases the brake pressure to that wheel to allow it to turn again while maintain pressure to the other brakes. It has nothing to do with weather conditions or road conditions-- just wheels turning under brakes Under normal driving and brake applications you will not notice ABS operation as it will not be working. You will only notice the ABS assistance when you are under very heavy brakes and the sensation is a pulsing in the brake pedal under your foot. Run the fault code to check for recorded faults in the ABS or have an accredited brake shop specialist check out your concerns

Feb 08, 2014 | Ford Cars & Trucks

2 Answers

I have abs and brake light warning lights on, however, when checked by mechanic the abs brakes are working fine. whats causing light to come on?


FOR ONE THING CHANGE MECHANICS ! HE SHOULD HAVE FIXED THE PROBLEM, YOU MAY HAVE A SERIOUS BRAKE ISSUE ! IF LIGHT IS ON IT WILL NOT PASS INSPECTION ! YOU MAY HAVE AIR IN SYSTEM, NEEDS BLEED ! FLUID COULD BE CONTAMINATED , NEEDS BLEED OUT, REPLACED W/ FRESH FLUID ! ABS REQUIRES THAT THE REAR BRAKE CIRCUIT OPERATES BEFORE THE FRONT BRAKES, THIS PREVENTS SKIDDING, THE PURPOSE OF ABS BRAKES, CORRECT ? MASTER CYLINDER HAS SEALS, CONTAMINATED FLUID AFFECTS SEALS, BRAKE LIGHT WILL STAY ON UNTIL PROBLEM IS RESOLVED !!! REAR BRAKES IF SHOES NEED ADJUSTED, CLOSER TO DRUM ! THIS WILL HELP, BUT BLEEDING OUT ALL BAD FLUID & AIR IN SYSTEM IS PARAMOUNT !!!!!! BRAKE LIGHT SWITCH MAY NEED REPLACED, PROPORTIONING VALVE WHICH SEPARATES FRONT FROM REAR BRAKES , IS OUT OF BALANCE, THE VALVE NEEDS TO BE @ A NEUTRAL OR CENTERED POSITION, COULD BE STUCK TOWARD EITHER BRAKE CIRCUIT, MORE FRONT THAN REAR, UNDERSTAND ? THINK I COVERED YOUR ISSUE, PLEASE RATE MAY ANSWER ! THANKYOU,

Apr 02, 2013 | 2002 GMC Safari

2 Answers

Esp and abs light on in 2009 ford transit how do i eliminate them


Anti lock brake system light comes up when there is issue with car brake systems.It can be low brake fluid or faulty ABS fuse or its issue with brake system or assembly.Your vehicles brake system needs inspection.

To troubleshoot these issue,i suggest you to refer the help links provided below.There are direct links with accurate solution,for these specif issue.

Click the link below and follow the procedure:------

All types of ABS LIGHT / brake problems and repairs

http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

-------------------


ABS light stays on but brakes work fine?

http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html

----------------
VCS and ABS lights go on and off intermittently on Lexus? http://howtobyme.blogspot.com/2011/11/vcs-and-abs-lights-go-on-and-off.html
-------------
The ABS and Traction Control Lights stays ON dash of car? http://schematicsdiagram.blogspot.com/2011/06/abs-and-traction-control-lights-stays.html

------------- ABS & Brake lights warning indicator steady on dash and speedometer not working for Dodge Ram?

http://howtobyme.blogspot.com/2011/11/abs-brake-lights-warning-indicator.html

-----------------------
Battery Light and ABS Light on Dash http://whoisbyme.blogspot.in/2012/07/battery-light-and-abs-light-on-dash.html

-------------
Sometimes ABS light comes on while Driving? http://howtobyme.blogspot.com/2011/12/sometimes-abs-light-comes-on-while.html
----------- How Anti-Lock Brakes Work?

http://technoanswers.blogspot.com/2011/11/how-anti-lock-brakes-work.html

-------------
Brake System Troubleshooting? http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

-------------
Anti-lock brake light stays on all the time?

http://technoanswers.blogspot.com/2012/01/anti-lock-brake-light-stays-on-all-time.html

-------------------

ABS light comes on and Car makes Grinding noise?

http://repairhelpcenter.blogspot.com/2012/01/abs-light-comes-on-and-car-makes.html

---------------
ABS trouble codes for all models?

http://repairhelpcenter.blogspot.com/2011/11/abs-trouble-codes-for-all-1994-00-acura.html
------------

2008 Toyota Highlander: ABS warning light Blinking and OBD Error codes Coming?

http://technoanswers.blogspot.in/2012/05/2008-toyota-highlander-abs-warning.html

--------------


2003 Lexus ES: VSC, TRAC OFF, ABS lights ON?

http://technoanswers.blogspot.in/2012/04/2003-lexus-es-vsc-trac-off-abs-lights.html

----------------
2008 Toyota Highlander Hybrid: Warning Lights Abs, Vsc & Brake Are On?

http://technoanswers.blogspot.in/2012/04/2008-toyota-highlander-hybrid-warning.html

-------------


ABS & Brake warning lights remains steady on dash? http://schematicsdiagram.blogspot.com/2011/12/abs-brake-warning-lights-remains-steady.html



------------
Can I drive the car without ABS fuse connected? http://schematicsdiagram.blogspot.in/2012/02/can-i-drive-car-without-abs-fuse.html

-----------
Where is ABS/TCS module located on 2005 Cadillac Deville

http://schematicsdiagram.blogspot.com/2011/12/where-is-abstcs-module-located-on-2005.html

------------------
ABS motor keeps running? http://schematicsdiagram.blogspot.com/2012/01/abs-motor-keeps-running.html

------------
When the car stops, abs pump turns ON? http://howtobyme.blogspot.com/2011/12/when-car-stopsabs-pump-turns-on.html

-----------
Replacing ABS unit on Buick Century? http://technoanswers.blogspot.in/2012/02/replacing-abs-unit-on-buick-century.html

----------------
2008 Toyota Tacoma: ABS causes Brake pedal fade? http://technoanswers.blogspot.in/2012/04/2008-toyota-tacoma-abs-causes-brake.html
-------------- Toyota Camry: Premature ABS Actuation? http://technoanswers.blogspot.in/2012/04/toyota-camry-premature-abs-actuation.html

-----------

How to replace ABS Modulator Control Unit on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-abs-modulator-control.html

----------------


How to replace ABS Pump Assembly on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-abs-pump-assembly-on.html

-----------


How to remove ABS Accumulator on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-abs-accumulator-on-acura.html

---------


How to remove ABS Control Unit on Acura Integra?
http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-abs-control-unit-on-acura.html

------------
These details will help.
Thanks.

Nov 24, 2012 | Ford Transit Connect Cars & Trucks

2 Answers

How to turn off yellow break light flashing on dashbord on 1999 audi a8


check the conections on the lomb clean the inside of the bulb holder might be a loose wire or conection if light still on the computer in the car is saying that there is a bulb blown if all else fails disconect the battery for half an hour if its still on pass might need reseting

Aug 24, 2012 | 1999 Audi A8

2 Answers

Anti-lock system light on


Anti-Lock Braking System (ABS)
Purpose Anti-lock brake systems (ABS) - generally also referred to as anti-lock
systems (ALS) - are designed to prevent the vehicle wheels from locking
as a result of the service brake being applied with too much force, especially
on slippery road surfaces.
The idea is to maintain cornering forces on braked wheels to ensure that
the vehicle or vehicle combination retains its driving stability and manoeuvrability
as far as physically possible. The available power transmission
or grip between tyres and carriageway should also be utilised as
far as possible to minimise the braking distance and maximise vehicle
deceleration.
Why ABS? Although today commercial vehicle brakes are designed to a very high
technical standard, braking on slippery roads often results in potentially
dangerous situations. During full or even partial braking on a slippery
road it may no longer be possible to fully transfer the braking force onto
the road due to the low coefficient of friction (friction coefficient (k)) between
the tyres and the carriageway. The braking force is excessive and
the wheels lock up. Locked wheels no longer provide any grip on the
road and are almost incapable of transferring any cornering forces
(steering and tracking forces). This often has dangerous consequences:
- The vehicle becomes unsteerable
- The vehicle breaks away in spite of countersteering, and starts to
swerve.
- The braking distance is significantly increased
- Tractor-trailer combinations or semitrailer trains may break away or
jackknife.
Load sensing valve influence On dry roads today's load sensing valves (ALB) alone are often capable
of preventing the wheels from locking if the vehicle is unladen; they also
help the driver to effectively grade the braking process on wet road surfaces,
but they are unable to prevent locking as such (no slip monitoring).
In addition, they are unable to counteract any overreactions on the
part of the driver, or any variances in frictional or adhesion coefficients
which may apply to different sides of the vehicle, or indeed to its different
axles (?-split road surfaces).
Benefits of ABS: Only the Anti-Lock Brake System (ABS)
- guarantees stable braking characteristics on all road surfaces.
- maintains steerability and generally reduces the braking distance
- prevents vehicle combinations from jackknifing
- reduces tyre wear.
Limits of ABS Although ABS is an effective safety device, it can not suspend the limits
defined by driving physics. Even a vehicle fitted with ABS will become
uncontrollable if driven too fast around a corner.
So ABS is not a licence for a maladjusted style of driving or failure to observe
the correct safety distance.
4
ABS Training Anti-Slip Regulation (ASR)
Anti-Slip Regulation (ASR)
Why ASR? Increasing the engine output (accelerating) on a slippery road surface
can easily lead to the maximum adhesion on one or all powered wheels
being exceeded causing them to spin, especially if the vehicle is unladen
or partially laden.
Spinning wheels when driving off or accelerating represent a safety risk
just like locked wheel do when braking.
Reasons - Wheels that spin transfer just as little cornering force as locked
wheels.
- They also no longer transfer any tractive power onto the road.
Consequences - Vehicles that do not move or get stuck.
- Vehicles that can no longer be steered, jackknife on uphill uphill
gradients, or swerve in corners.
Benefits of ASR ASR prevents the powered wheel from spinning and provides the following
benefits:
- Tractive power and cornering forces are maintained.
- Stable driving behaviour is ensured when moving off, accelerating
and negotiating corners on slippery roads.
- The indicator lamp (if installed) is used to warn the driver of slippery
road conditions.
- Tyre wear is reduced to a minimum, and the motor vehicle's drive
train protected
- The risk of accidents is further reduced.
ASR and ABS: ASR represents a worthwhile addition to an ABS-controlled braking system.
All that is required to turn ABS control into full ABS/ASR control is
an ECU with the additional ASR function and a few additional components
for controlling the differential brake and the engine. This why ASR
is only available in combination with ABS.
Even a differential lock for off-road use and ASR do not exclude but complement
each other.
Limits of ASR The traction capacity of an all-wheel driven commercial vehicle can not
be achieved by a motor vehicle with only one driving axle - not even with
optimal ASR.

anti-lock-system-light-vi1ay411tmzjz03ru4fkmxgj-5-0.jpg

anti-lock-system-light-vi1ay411tmzjz03ru4fkmxgj-5-2.jpg

Feb 28, 2012 | 1994 Cadillac DeVille

2 Answers

My abs warrning light is showing on my bmw 316 and does not go out..


On vehicles equipped with antilock brakes (ABS), a second warning light is provided to warn if a problem occurs within the ABS system. The ABS lamp comes on when the ignition is turned on for a bulb check, then goes out after the engine starts. If the ABS warning light remains on or comes on while driving, it indicates a fault has occurred in the ABS system.

What happens next depends on the nature of the fault. On most applications, the ABS system disables itself if the ABS warning light comes on and remains on. This should have no effect on normal braking. Even so, ABS will NOT be available in an emergency situation or when braking on a wet or slick surface.

CAUTION: If the brake warning light also comes on and remains on while the ABS warning light it on, it signals a serious problem. Your vehicle may not be safe to drive. The brakes and ABS system should be inspected immediately to determine the nature of the problem!

If the ABS light comes on momentarily then goes out, the nature of the problem is usually minor and the ABS system usually remains fully operational. Some vehicle manufacturers call this kind of fault a "nonlatching" fault (meaning it isn't serious enough to disable the ABS system).

Regardless of the type of fault that occurred to trigger the ABS warning lamp, a special "code" is recorded in the ABS module's memory to aid in diagnosing the problem. On some vehicles this code can be retrieved by putting the ABS system into a special diagnostic mode. The code is then flashed out through the ABS warning lamp. The code number refers to a diagnostic chart in a service manual that must be followed to pinpoint the faulty component. On other applications, a special "scan tool" must be plugged into the vehicle's diagnostic connector to read out the fault code.

Jun 07, 2011 | 1995 BMW 3 Series

1 Answer

I ve got a kalos 1.4sx 2008 and i ve got problems with the brakes. The brakes ''crunch'' when i m bringing the car to a halt,even on dry roads. The abs warning light has been on a couple of times but...


The Chevrolet/GM autos rely on a Kelsey ABS actuator system that is electronically controlled. I know its hard to describe sounds, but is it possible the crunch is a hum? If the ABS light comes on and goes off after restart it means one of two things. That the ABS controller is going bad or the speed sensors on the wheels have come loose or gone bad. Under your hood there is a fuse compartment that contains the fuse that controls the ABS system on your vehicle. Its a 60 Amp fuse and large.. Look in your owners manual for its location. . Check it with the vehicle OFF to make sure its not blown or cracked. Leave the fuse disconnected and start the car. The ABS light should STAY on as well as the parking brake light. Test your brakes by pressing down on them while the car is in park and not moving.. do you hear the sound. If you DONT hear the sound then the ABS control module is causing the brake pump to work continuously and thus your "noise". YOu can confirm by placing the fuse back in place and then listening to the car about where the drivers door is... do you hear a hum? If so you can leave the fuse disconnected to deactivate the ABS module. The brakes will still function you just WONT have ABS capability. Confirm this with a very slow roll from park or neutral and press brakes to stop. If you dont hear the noise or a hum, reconnect the fuse and take the car for a drive. Turn to the left and right while applying the brake at an intersection.. vehicle in motion slightly. Do you notice that the ABS light or noise occurs turning one way or the other or both? If it comes on during the turn then the ABS sensor in that wheel or both wheels need to be inspected and possibly replaced. Finally, you need to inspect the brake pads for wear..typically however brake pads have WEAR INDICATORS built in and will start to SQUEAL when you apply the brakes telling you time to replace pads. If its a squeal and not a crunch then have pads replaced. Finally, be sure and make sure you dont have any rocks or road debris within the brake area or between teh pads and the rotors. That would be your final area to review for a CRUNCH noise.

Jun 11, 2010 | 2008 Chevrolet Aveo5

1 Answer

1996 ABS light


the abs light will come on when you turn key on and go off after engine starts (3secs),it will also come on if you brake harder than required,to stop the wheels locking.If it comes on at other times it could be reservoir needs topping up or an abs fault(check it by standing on brake pedal at 30kph(wheels should not lock up until 3/5kph.)read antilock brakes or antiblocking brakes, 2 different systems.

May 21, 2010 | 1996 Chevrolet Blazer

2 Answers

ESP ABS LIGHT ON .AS WELL MY BREAK LIGHT FLASHING. AUDI A4 2 LITRE


i have seen this many times on VW passats which are on the same platform. You may need a new abs control unit. if the abs control unit cannot be scanned by a computer, check all fuses. if abs contol unit is needed, there is aftermarket places that can rebuild them, i recommend factory unit.

Jun 15, 2009 | 2001 Audi A4

Not finding what you are looking for?
1997 Toyota RAV4 Logo

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...