Question about 2007 Chevrolet HHR Special Edition

1 Answer

Rear turn light bulb will not come out. How do I do this with out breaking it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 492 Answers

Spray WD40 into the socket and wait an hour. Then spray again. use leather gloves to grip the bulb. Push and turn as usual. If the ***** thing does not come out you can twist the glass out of the brass part and use needle nose pliers to extract the rest. Good luck.

Posted on Mar 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2000 jeep grand cherokee none of the rear lights work


Check BackUp Module, generally is located in the rear quarter panel (drivers side).

Dec 23, 2012 | 2000 Jeep Grand Cherokee

1 Answer

1993 GMC sierra 1500 replaced rear turn signal bulb and break light bulbs..still no break light and turn signal still flashing fast..no hazzard light on same side


the break switch is damaged replace it then the hazzad light and the break light will be ok .. and about the indicator light its circuit's capacitor or the resistor is damaged please check that and replace the same it will be ok

Aug 24, 2012 | Cars & Trucks

2 Answers

No break lights ,tail lights on a 1999 suberban check the fuse and they are all good when i turn my lights on and put on the turn singal and press on the break they start blinking very fast when i thouch...


it sounds like a ground problem...sounds like the ground is trying to go through the bulbs to make connection....check all ground wires battery, engine and rear frame...

May 27, 2011 | 1999 GMC Suburban

1 Answer

My brake lights turn off when i hit the break with my lights on


the rear bulbs are burnt out all cars have two stage light bulbs in the rear just replace the bulbs and that should solve your problem

Mar 09, 2010 | 2003 Mitsubishi Eclipse Coupe

1 Answer

Bulb failures with no real pattern


check the front and rear turn signal and brake bulbs ,check for filament wear or drakness in bulb glass.if this is found replace bulb,you may also have a bad ground to a bulb socket, turn lights on (signal and break) and wiggle wires at bulb socket, watch light, if it dim any replace that socket and check the ground wire.

Mar 04, 2010 | 1989 Jaguar Vanden Plas

2 Answers

I need a FREE 1992 Toyota Camry taillight wiring diagram. My side rear park lights come on but my park lights that work with the brake lights don't. I changed the bulbs and tested everything. I narrowed it...


brown wire is your park LT yellow Left-turn green right-turn. Now the break light my be on it own wire it is red black is ground. but if you have a test light see if the brown wire turns on the test LT when you turn on the park LT or what wire light up when you step on the break pedal. and so on.

Feb 25, 2010 | 1992 Toyota Camry V6

2 Answers

Signal lights dont work when breaking


No,this is not normal,this normal when the emergency flashers are on,but not the turn signals.Check the bulbs(all of them)in the rear tail light assembleys.If you can not tell which bulbs are bad,replace them all.Does this vehicle have a trailer light plug?If it does,it could be in it.After the bulb replacement(look at bulbs in your hand to see if filiments are burned)replace the turn signal flasher.To find it turn key on,and left or right turn signal on,and listen,and feel for it under dash around the steering column.

Aug 23, 2009 | 1988 Jeep Comanche

1 Answer

Right read blinker/break light dont work, turn signal blinks rapidly


It's the bulb. There are two filliments in the bulb. One is for when you turn your lights on and the other is for breaking and blinker flashing. When the break filliment goes bad it causes the blinker to flash very rapidly. 100% the bulb. Change it and all will be good again. P.S. if it were a fuse none of the break lights or blinkers would work.

Apr 20, 2009 | 2005 Ford Explorer

1 Answer

Rear window break light


You either have a 'single filament' bulb installed in a 'dual filament' brake lamp socket ... OR .. you have a 'dual filament' bulb short circuited internally. Check your rear brake lamp bulbs (supposed to be 'dual filament' - two contacts on their bottoms). When you step on the brake pedal, do your dash lights LIGHT UP? A 'cross circuit' exists between brake lamp circuit and parking lamps circuit.

Apr 15, 2009 | 2001 Hyundai Elantra

1 Answer

Rear lights


Try removing the the bulbs from the left tail light and cleaning sockets and bulb bases (or replace them).
It sounds like a contact problem which may be exacerbated by having the tail light on when the brake light attempts to light.
There are probably also quick disconnects plugged onto the light fixtures that might be corroded but those are not as easy to clean.

Aug 20, 2008 | 1999 Jeep Cherokee

Not finding what you are looking for?
2007 Chevrolet HHR Special Edition Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...