Question about 2000 Ford Focus

2 Answers

I can not pot my ford focus in gear i dont now what is is as cant finf cluth cable and the cluth peddel got no preass be hind it and my car is 2001 and do u now where the cluth is in the engean

Posted by on

  • spud_man19 Aug 02, 2008

    i dont see a cable coming from the clutch peddle to the gear box should i see this

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 208 Answers

The Ford Focus does not have a clutch cable. It has a hydraulic clutch. There is a small reservoir on the firewall for BRAKE fluid for the clutch.

Posted on Aug 03, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 726 Answers

Yes the clutch is
well u have to take the gear box out
and the clutch is on the back of the engine


now the cable runs from the pedel to the gear box
if u look u will see a blck cable and you can adjust it
it might need adjusting

Posted on Aug 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO UNLOCK YOUR FORD TAURUS GEAR SHIFT


Search Results

    Ford Focus Questions - the car starts up but i cant get it out ...

    www.cargurus.com > Questions > Ford > Focus

    CarGurusJan 26, 2013 - the car starts up but i cant get it out of park the button on the shifterwont ... point the shift interlock will allow you to shift to neutral and other gears with ...That should expose your shift lock over ride button. .... Used Ford Taurus".

    97 Ford Taurus gear shift stuck in park - Car Talk

    community.cartalk.com/.../97-ford-taurus-gear-shift-stuck-in-park
    Feb 7, 2009 - Over the past week, it has been difficult to get the gear out of park. ... 97Ford Taurus gear shift stuck in park ... LOCK, then remove the key. 2.

    Why Wont My Car Shift Out of Park - Shifter Interlock ...

    ? 3:49
    https://www.youtube.com/watch?v=ZdDsfNrabsM
    Mar 21, 2014 - Uploaded by BleepinJeep
    Only problem is if it fails, you cant get your car out of park. ...Those interlocks seem like they might be a solenoid that slides alock pin out so that you can move the lever freely. .... Someone told me it was possibly the Passing gear cable ? ... Ford TaurusWon't Shift Out Of Park, Brake Lights Don't Work With ...

    Car stuck in Park, shifter won't move. - DoItYourself.com ...


Jan 18, 2016 | Ford Cars & Trucks

1 Answer

I have a 2002 ford focus 5 speed and it will not go into gear i press the cluth down all the way but still will not let me put in gear


I don't know if you have a clutch cable or a hydraulic clutch, but either way it is not working. In other words it is not disengaging the pressure plate from the flywheel and thus you can not place the vehicle into any gear. If it's hydraulic the master cylinder may be bad and leaking internally along with a bad slave cylinder down below. If a cable it is either to stretched or broken. This is where you need to start looking. Both are very inexpensive to replace.

May 11, 2011 | Ford Focus Cars & Trucks

1 Answer

Cant find fuel cut out switch on ford focus 1.8 tddi w reg. Not hind right side kick panel.


The inertia fuel shutoff switch is located in the front right-hand (Passenger side) foot well behind the cowl side trim panel
see diagram below. it is black box with a red button, this is a manufacture lay out of you vehicle fuel system the box marked number 3 is your switch
be8010c.gif
hope this helps it cannot be anywhere else for this year and model vehicle

Oct 18, 2010 | 2000 Ford Focus

1 Answer

Cluth peddel does not retract after you let your foot off it


The slave cylinder has failed leaving no fluid in the line. Check the clutch master cylinder as well for low fluid, they often leak too.

Jun 14, 2010 | 2001 Pontiac Grand Am SE

1 Answer

I adjusted my handbrake cable on my 2001 ford focus SE but it still acts like there is no brake. The cable tigtened so i dont think its broken but what is the solution to getting the "e-brake" to work?


The adjustment that you touched on the cable shouldn't be touched. Well it really only gets adjusted when new cable/s are installed or if after the drum brakes are adjusted and there is still play in the cable, then it is adjusted.

Apr 27, 2010 | 2001 Ford Focus

2 Answers

Clutch problems


IT might be that the pressure plate fingers broke or the cluth plate has disintegrated. You will have to take the gearbox out and inspect the clutch.

Sep 12, 2009 | 2001 Ford Focus

1 Answer

Gear Shift Handle


cord??dont you mean a cable ,this is the inhibitor so you cant put in gear without brake on .as button pushes in it pulls the cable up which in conjuction with brake releases the gearchange.it is possible to remove the lot just like the cars of yester year

Oct 25, 2008 | 2002 Ford SVT Focus

Not finding what you are looking for?
2000 Ford Focus Logo

526 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...