Question about 1998 Pontiac Bonneville

Open Question

Water coming out of the oil pan drain plug - 1998 Pontiac Bonneville

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 131 Answers

SOURCE: oil pan drain plug

Use a small amout of RTV

Posted on Jul 07, 2008

  • 25 Answers

SOURCE: my oil pan drain plug was stripped when i bought

you need to purchase a chiltons repair manual. no overly difficult but the front cv drive shafts and starter may need to be removed. be sure to drain all oil out of pan before removing. use a new pan and gasket. before to check the tightness of the new pan's drain plug before adding oil.

Posted on Mar 22, 2009

  • 17 Answers

SOURCE: Need specific location of oil drain plug to change oil

I have owned a 1999 intrepid for 9 years. And have changed the oil many times in the 170,000 miles I've owned it. This car comes mostly with a 2.7 liter motor. It does some times have a 3.5 liter. As you open the hood,there is a sticker that tells you what motor it has. If you have the 2.7, between the two front wheels you have a cast aluminum oil "pan" You will see a oil filter sitting vertical, towards the passenger side.The bottom of the filter is almost flush with the bottom of the oil pan. Just to the side of the filter,towards the driver side, is a hex head oil plug. It will take a 11/16" wrench to remove it.Hope this helps lbreen

Posted on Apr 22, 2009

  • 176 Answers

SOURCE: My oil drain plug was stripped from the engine oil

Tighten three oil pan/transmission bolts 45 Nm (33 ft. lbs.) Tighten all bolts oil pan/engine block cross over 15 Nm (11 ft. lbs.)

Posted on Jun 12, 2009

  • 14036 Answers

SOURCE: water running out of oil pan drain .

SOUND LIKE LEAKING HEAD GASKET.CHECK ENGINE COOLANT TO SEE IF LEVEL DROP OFF REAL REAL LOW.IF SO ITS HEAD GASKET LEAKING.

Posted on Oct 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Drain plug on 1992 chrysler lebaron


water drain, lower edge of engine block just above the oil pan surface nearer to back of engine, and is lower portion of side of radiator

oil drain, lower portion of oil pan

torque converter drain, found through a round cut out in flywheel

you must specify what you are wishing to drain

Aug 04, 2014 | 1992 Chrysler Lebaron

1 Answer

How to do a transmission fluid/filter change on a gmc 1500 2wd v8 350 step by step


Raise the vehicle. Refer to Vehicle Lifting. Place a drain pan under the transmission oil pan. Remove the oil pan drain plug. Remove the oil pan bolts. Remove the oil pan. Remove the gasket. Remove the magnet. Remove the oil filter. Remove the filter neck seal. The transmission oil pan gasket is reusable. Inspect the gasket and replace as needed. Clean the transmission case and the oil pan gasket surfaces with solvent. Install the filter neck seal. Install the oil filter. Install the oil pan gasket to the pan. Install the magnet into the bottom of the pan. Notice: Refer to Fastener Notice in Service Precautions. Install the oil pan to the transmission with seventeen bolts. Tighten the oil pan bolts to 11 Nm (97 inch lbs.) . Apply a small amount of sealant GM P/N 12346004 to the treads of the drain plug. Install the oil pan drain plug. Tighten the oil pan drain plug to 18 Nm (13 ft. lbs.) . Install Dextron Automatic Transmission Fluid. Lower the vehicle.

Jul 04, 2011 | GMC Sierra 1500 Cars & Trucks

1 Answer

How do i remove 2008 cobalt oil pan?


  1. Raise and support the vehicle.
  2. Place a drain pan under the oil pan drain plug.
  3. Remove the oil pan drain plug.
  4. Drain the engine oil.
  5. Remove the engine belt
  6. Remove the lower AC compressor bolt.Remove the 4 oil pan to transaxle bolts (1).
  7. Remove the oil pan bolts.

Jun 17, 2011 | Chevrolet Cobalt Cars & Trucks

2 Answers

I have oil around the area where my drain plug is but it istn coming from the drain plug and there isnt alot just a bit whats up with my truck?! I hope yall can help.


Could be the gasket for the whole oil pan that's leaking. That would let oil run down the oil pan, to where the drain plug is.

Feb 06, 2011 | Ford Ranger Cars & Trucks

1 Answer

Oil Pan drain plug is leaking. Dealer service replaced with oversized tapered plug but still leaking. How big of a job is it to replace oil pan?


you may be able to cure the leak with a thicker, softer gasket on the drain plug. Also the drain plugs come in several oversizes. So if the 1st one doesn't work you can try the next size.

http://www.cgenterprises.com/drain_plugs_oversize_repair.htm.

considering the cost of oil pan replacement I would just add a dab of RTV sealant to the drain plug washer next time I had an oil change.

Dec 30, 2010 | 1997 Toyota Corolla

1 Answer

Two questions: On A 2002 4x4 Blazer, is the oil drain plug on the oil pan? The only plug I see is under/behind the engine. Also does it turn counter clockwise to loosen, I was doing that and won't loosen.


Yes the oil drain plug is in the oil pan and the oil pan is on the motor.The plug is in the rear part of the oil pan and you need a 15mm wrench or socket to remove it.It does come off counter clockwise.Sometimes they are tightened to tight and can be hard to remove.Good luck.

Dec 07, 2009 | 2001 Chevrolet Blazer

1 Answer

Where is the oil drain plug? How do you distinguish it from the transmission plug?


the oil drain plug is the 14mm bolt on the bottom of the the big black oil pan. on a tacoma the oil pan is more in the front and tranny sits behind motor- therefore trans pan if further back. I also think the tranny drain plug is more of an alan hex head type bolt. If the fluid comes out red you got the wrong one.

Nov 30, 2009 | 2008 Toyota Tacoma

1 Answer

Replacing fluids 0n 1996 300zx


radiator antifreeze: open drain **** on radiator and drain refill with water re plug and leave radiator cap off. start vehicle. watch when coolant drops or rises drastically as that is the thermostat opening. at that time re open drain **** and fill radiator with hose water at the same time. when water coming out is completely clear again turn vehicle off and drain radiator again. fill with antifreeze and water mix. 50/50

oil: jack up car, find oil plug, directly behind steering rack on oil pan. undo plug and drain oil into container. while oil is draining remove oil filter. wait for oil to drain completely then re-install drain plug and new oil filter(filled with oil) undo oil cap and pour in oil 4.5 quarts on n/a and 5 for turbo. tighten cap and your done.

brake system: dont attempt, use an experienced mechanic as the lines need to be bled in numerous places including inside the car from the abs module mounted behind the passenger seat.
easy brake system: individually bleed brakes while adding fluid until clear fluid comes out. (not efficient)

a/c: do not attempt unless you have an evac pump for ac systems.

clutch: same as easy brake except using the bleed valves at the slave cylinder and on passenger side fender well.

washer fluid: add fluid and squirt a little to make sure there is no air in the line

Jul 18, 2009 | 1996 Nissan 300ZX

1 Answer

How do you change the engine oil


losen the drain plug with a oil pan close by then let drain into pan until no more oil comes out tighten plug back to bottom of the motor. find oil filter and losen the filter with drain pan underneath let drain and replace with new oil filter then wipe everything clean and then start filling motor with new oil ...... easy maintanence

May 17, 2009 | 2007 BMW 335i Coupe

1 Answer

Oil pan


You dont need to change the oil pan.Goto an auto parts store and ask for a universal drain plug.They come in a red package and the word 'HELP' on them.

Jul 19, 2008 | 2001 Chevrolet Monte Carlo

Not finding what you are looking for?
1998 Pontiac Bonneville Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...