Question about 2006 Ford F-150

1 Answer

Metty@att.netFuel pump not working - 2006 Ford F-150

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 984 Answers

Did you check the Fuel Inertia Switch in the passenger side kick panel ?

If you did, and it is not tripped, might want to check the FPDM ( Fuel Pump Driver Module ) to see if it has corrosion built up behind it, and cracked the PC board.

Here is what mine looked like on my 2006 ( salt in winters )
metty@att.netFuel pump not working - sscullys_144.jpg

This is the wide picture showing location.

The FPDM is mounted to the cross member, just in front and above the spare tire under the rear of the truck ( drop the spare tire to see it ) .. This picture is taken from the rear bumper, facing the front of the truck. The cable on the right is the spare tire lift and the tire on the left is the driver's side rear tire.
sscullys_145.jpg

The new PFDM has stand offs to stop corrosion from cracking the modulmetty@att.netFuel pump not working - sscullys_146.jpg"http://i.fixya.net/uploads/images/sscullys_146.jpg" alt="sscullys_146.jpg" class="h_mi" />

Check the P/N tmetty@att.netFuel pump not working - sscullys_147.jpge are no new revisions
sscullys_147.jpg

Posted on Mar 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Buick Century oil pump location


Oil pumps are located inside your oil pan. You'll have to remove the oil pan to see it.
I hope I answered your question.
If you like, you can email me and let me know.
TIMLSU@att.net

Oct 11, 2016 | Buick Century Cars & Trucks

1 Answer

Not getting fire


You may be geting gas from the fuel pump but are the injector working or do they have power going to them. You can check the dark green & orange wire at any injector. Also check for power at the plug of the coil (there are two together but both get power from one place). The power wire for the coil also happens to be dark green and orange. If you are not getttting power to either one, check the auto shutdown relay (ASD). This relay stops power to the injectors and the coil but the fuel pump will still work. It doesn't shut down the fuel pump. You can let me know here or you can email me directly at csautomotivecars@att.net with all your information and I will be happy to help and no there is no cost. Just need to be sure if this is the case first (the ASD relay) to go any further. Also if you have a turbo this information isn't correct as far as the wire coloring goes.

Apr 05, 2012 | 2007 Chrysler PT Cruiser Touring Hatchback

1 Answer

Need to replace my 04 mustang fuel pump


Your fuel pump is in the gas tank on the vehuclie. You will need to lower the gas tank in order to gain access to it. If you are in need of something like instructions with some pictures, feel free to email me at csautomotivecars@att.net and I will be happy to make you up some instructions and maybe some tips as I have done to many of them. Have you checked your fuel pump cut off switch ? Also there is a fuel pump relay that should be checked befire going ahead with replacing the pump. If you do need instructions, I do need to know your engine size and remind me of the year and model of your vehicle. Yes the help would noy cost you anything, I don't mind helping.

Jan 10, 2012 | Cars & Trucks

1 Answer

Where is the oil dipstick on my 2000 expedition located and also what color is the the fuel pump reset switch?


Below is a picture of the location of both the oil dipstick and the fuel pump cut off switch. In Fords the fuel pump cut off swtich is either white or red. I believe but not 100 percent sure that your's is white. This should be in your owners manual if you have one. If you do not and would like a copy, you can email me at csautomotivecars@att.net with your make, model and year and I will be happy to email you a copy. I hope this helps and good luck.


clifford224_415.jpg

clifford224_416.jpg

Aug 31, 2011 | 2000 Ford Expedition

1 Answer

ATT.NET7.3 POWERSTROKE WONT IDLE 99 MODEL


According to my Haynes Diesel Engine Repair manual this is a list of possible causes.
1.Slow idle incorrectly adjusted
2.Fast idle is inoperative
3.Restricted fuel return system
4.Glow plugs turn off too soon
5.Insufficient fuel suuply to injector pump
6.Injector pump malfunction
7.Incorrect, contaminated or poor quality fuel
8.Air in fuel.
The manual is part number 10330 anywhere they sell Haynes manuals ($20). It has a very good section on the 7.3 especially if you don't want to spend money at a diesel shop every time it needs work. Hope this helps.

Jun 19, 2011 | 2003 Ford F350 Super Duty DRW SuperCab

2 Answers

NEED FUSE PANEL DIAGRAM 98 FORD F150,THANX!!


These are for the fuse panel inside the truck not the power distribution box located in the engine compartment. This should be in your owners manual if you have one. If you need an owners manual feel free to email me at csautomotivecars@att.net with your make, model and year and I will be happy to email you a copy. Don't worry, no cost. I hope this helps and good luck.


clifford224_147.gifclifford224_148.gifclifford224_149.gifclifford224_150.gifclifford224_151.gifclifford224_152.gif

Apr 14, 2011 | Ford F-150 Cars & Trucks

1 Answer

New fuel pump not working. have 12vdc at pump leads but when i connect leads to pump motor i get 0 vdc


hey rick,got same problem spending lots of moneystill not fixedafter a week of steady work my deal is if you find problem email clydesgirl33@att.net send your email to this email if i find problemi will share info because no onf knows the problems Thanks the Clyde

Feb 15, 2011 | 1994 Ford Thunderbird

1 Answer

The car is turning over but will not start and run


chek the gasoline pump in the tank souns like its not working open the trunk and in front off the spare tire under the floor carpet you will se a litel plate that is bolted whit 2-4bolts thake them out and lift the plate and ther is going tho be a cabel and the cabel is conected tho the pump thurn on the ignition and att the same time listen tho were the cabel is conected if it works you are going tho here a small buzzz if you dont its ded

Oct 20, 2009 | 1996 Nissan Maxima

Not finding what you are looking for?
2006 Ford F-150 Logo

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...