Question about Land Rover Freelander

Open Question

Cylinder head torque settings for 1.8 petrol freelander 1999. i need stages 1,2 and 3

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 15 Answers

SOURCE: replacement of cylinder head gasket freelander 1800 petrol

DEFINITELY NEW BOLTS.
1ST STAGE 20 NM
2ND STAGE 180 DEGREES
3RD STAGE 180 DEGREES.....JOB DONE.

Posted on Jul 06, 2009

NismoMaster
  • 146 Answers

SOURCE: torque settings for cylinder head nissan sentra

Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees

Posted on Jul 26, 2009

  • 115 Answers

SOURCE: cylinder head torque settings for a toyota 1493cc

If you have a vehicle application for the motor you can get a Haynes or Chilton manual from your local auto parts store. They usual run around $30.

Posted on Sep 04, 2009

  • 1 Answer

SOURCE: torque setting cylinder head bolt 4 cylinder KIA sportage

I need the torque settings and pattern for a Kia Sportage 2.2

Posted on Jan 28, 2010

TDISLine
  • 1874 Answers

SOURCE: Hi, I`m looking for the

Cylinder head instructions for Audi A4 1.8 (1997)

Tightening sequence:

9c9e892.jpg
Renew cylinder head bolts: Yes
Stage 1 - Tighten: 40 Nm

Stage 2 - Tighten: 60 Nm
Stage 3 - Tighten: 90 degrees
Stage 4 - Tighten: 90 degrees

Posted on Sep 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the cylinder head bolts torque setting for a ford fiesta 1999 1.25?


Hello friend,
Copied from here
http://www.fordownersclub.com/forums/topic/6527-fiesta-zetec-125-tourqe-settings-help/

You will have to use an online converter from Ft/lbs to Nm if you want Imperial.

'the sequence is as follows...

8 - 6 - 1 - 3 - 9
10-4 - 2 - 5 - 7

STAGE 1: tighten to 15Nm
STAGE 2: tighten to 30Nm
STAGE 3: tighten 90 degrees

the camshaft carrier/capa are tightened to 15Nm.'

Sep 11, 2014 | Cars & Trucks

2 Answers

Citreon xsara 1999 1.8 16 valve cylinder head torque settings


If yours is an Xu series engine, you need to use a torque wrench and an angle dial wrench. Tightening is in 3 stages.
  • Stage 1: Tighten up to 60Nm (44 lb/ft) then fully loosen
  • Stage 2: Tighten up to 20Nm (15lb/ft) change to angle dial wrench
  • Stage 3: Angle tighten to 300 deg.
To avoid confusion, do stage 3 in 3 steps, tighten 100 deg each round and repeating the cycle until 3 rounds.

07718717-6a90-48f5-a87c-bc1ff81d67bd.jpg

04a9b611-4f0b-4da6-9052-a1cb2e517c02.jpg

Jun 13, 2014 | 1998 Citroen Xsara 1.6

1 Answer

Hi I need the torque settings for both the cylinder head and the bottom end bearings for a 1997 Toyota Prado (3.4litre petrol). Thanks


1997 Toyota Prado 5VZ-FE
Cylinder head bolts:

Tighten the cylinder head bolts in criss cross manner inside out, in four stages as under:
Stage 1. Torque the bolts up to 17 Nm.
Stage 2. 34 Nm.
Stage 3. Rotate all the bolts 90 degrees.
Stage 4. Finally rotate all the bolts further 90 degrees.

Main Bearings:
Tighten the main bearing bolts in two stages, as under:
Stage 1. 61 Nm.
Stage 2. Rotate the bolts further 90 degrees.

Big end bearings:
Tighten the big end bolt of connecting rods in two stages as under:
Stage 1. 25 Nm.
Stage 2. Rotate the bolts further 90 degrees.

Feb 27, 2014 | Toyota Land Cruiser Cars & Trucks

1 Answer

I HAVE AN AUDI A4 TDI X REG, IVE GOT THE CYLINDER HEAD OF. WHAT IS THE HEAD BOLT TORQUE AND IS THERE A SEQUENCE TO TORQUE THEM CHEERS.


Audi A4 1.9 TDI-PD (Pumpe Duse)

Cylinder head tightening sequence:

tdisline_853.jpg
Renew bolts!

Torque settings:
1. Stage 1 = 40 Nm
2. Stage 2 = 60 Nm
3. Stage 3 = 90 Degrees
4. Stage 4 = 90 Degrees

Please do rate my response. Thanks!

Sep 01, 2011 | Audi A4 Cars & Trucks

1 Answer

What are the torque settings for a 1997 audi a3 1.6 cylinder head


The torque settings for a 1997 Audi A3 1.6 cylinder head:

1. Tightening sequence
tdisline_167.jpg
2. Cylinder head instructions:
2.1. Renew bolts: Yes.

3. Tightening torques:
3.1. Stage 1 - Tighten: 40 Nm.
3.2. Stage 2 - Tighten: 90 degrees.
3.3. Stage 3 - Tighten: 90 degrees.


Please do rate my response. Thanks!

Jan 22, 2011 | Audi A3 Cars & Trucks

1 Answer

Need torque settings for cylinder head bolts on a 52 reg skoda fabia 1.4 16v any help much appreciated thanks


Torque settings for cylinder head bolts for Skoda Fabia 1.4 16v

Cylinder head bolts tightening order:

tdisline_116.jpg

IMPORTANT NOTE: RENEW BOLTS!

Stage 1: Tightening torque = 30 Nm
Stage 1: Tightening torque = 90 Degrees
Stage 1: Tightening torque = 90 Degrees

Please do rate my response. Thanks!

Dec 17, 2010 | Volkswagen Polo Cars & Trucks

1 Answer

Hi, I`m looking for the torque settings for the cylinder head on an audi a4 1.8 1997 petrol


Cylinder head instructions for Audi A4 1.8 (1997)

Tightening sequence:

9c9e892.jpg
Renew cylinder head bolts: Yes
Stage 1 - Tighten: 40 Nm

Stage 2 - Tighten: 60 Nm
Stage 3 - Tighten: 90 degrees
Stage 4 - Tighten: 90 degrees

Sep 21, 2010 | 1998 Audi A4

1 Answer

Cant find out the cylinder head torque settings for a 1997 2.0L ptrol 24 valve vitara


Cylinder head instructions
Cylinder head
Renew bolts No
Stage 1 Tighten 35 Nm
Stage 2 Tighten 75 Nm
Stage 3 Tighten 105 Nm

Feb 13, 2010 | 1999 Suzuki Vitara

2 Answers

Replacement of cylinder head gasket freelander 1800 petrol


My advice would be to replace them. This is also stated by the manufacturer.
Look how long they are, and keep in mind what would happen if one broke. It may not break when being installed, but down the road? I stated this to also help ease the 'sting', when you go to buy these bolts! Kind of an 'Ouch'!

May 17, 2009 | Land Rover Freelander Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...