Question about 2001 Chrysler Town & Country

1 Answer

SPEEDOMETER JUST QUIT. I REPLACED BOTH INPUT & OUTPUT SENSORS. I WAS TOLD THAT IF ONE OF THE SPEEDOMETER SENSORS GO OUT THE ENGINE LIGHT WILL COME ON. MY ENGINE LIGHT DID NOT COME ON. NOW I'M WORRIED.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The same happened on my Chrysler voyager just quit you have to reset it that was all it was on mine. I think my husband held the button in on the speedo/milage counter until you have lots of lights come up on your dash board it looks very pretty. This should reset your speedometer it did mine. Good luck

Posted on Mar 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced input and output speed sensors for erratic speedometer. Now the speedometer remains at 0. Anyone have a suggestion on what else could be wrong?


input and out put speed sensors tell the TCM and the ECM the difference between engine rpms and transmission input roms so that the correct gear ratio can be selected
A speedo sensor reads the out put shaft (drive line ) shaft and refers to road speed for speed and odometer readings and to calculate the fuel consumption rate
it is possible that you have replaced the wrong sensor
Talk with an accredited transmission specialist shop and have the problem diagnosed

Aug 10, 2015 | 2003 Dodge Neon

1 Answer

Have replaced speed sensor and speedometer, but speedometer still does not work. Do you have any suggestions on what to try next?


There are usually TWO speed sensors on modern day vehicles, INPUT and OUTPUT. You may have changed one of these , but you may need to change the other. Ask your parts supplier, they will help you with the other. GOOD LUCK FRIEND.

Nov 08, 2014 | 2001 Nissan Maxima

1 Answer

2005 Dodge Stratus Speedometer and idle problems


P0700 states Trans Control system Malfuntion

Jun 19, 2013 | Dodge Stratus Cars & Trucks

1 Answer

Odometer still doesn't work ! is there something i need to do that i haven't


-Is it drive by a cable...? If so the cable is broken or mis align.

mai lor

Apr 03, 2013 | 1989 Dodge Dynasty

1 Answer

Yamaha yfz r125 engine light on constantly, but engine runs ok


Close but not quite.
ECU handles tacho not speedo.
Speedo has it's own pickup usually on rear wheel hub or hall sensor on output shaft if not flexible cable direct drive from front wheel

Apr 16, 2017 | Cars & Trucks

2 Answers

P0720 speedometer and car speed problems


if it worked for a short time then check the wiring around the sensor you would have moved them around changing the sensor

Aug 12, 2012 | 2002 Ford Escape

1 Answer

My 2009 Hyundai Sonata quit accelerating while driving in town. The ESC and check engine light came on. I was able to turn the car off and back on and the ESC light went off and acceleration worked...


This may not be your problem but it does bring the vehicle in fail safe you may have a warranty
Group TRANSAXLE
Number 09-AT-016
Date AUGUST, 2009
Model
1999-SONATA
2001-ELANTRA, SANTA FE & XG
2003-TIBURON
2005-TUCSON
2006-AZERA
2007-ENTOURAGE

Subject
AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODES P0715, P0716, P0717, P0720, P0721 & P0722

An improperly functioning input speed sensor or output speed sensor may result in the following conditions:
^ "Check Engine" light on
^ Harsh P-R or P-D engagement shock
^ Transaxle in 3rd gear fail-safe
^ Diagnostic trouble codes 1. Using a GDS, check for DTCs in both the "Engine" and "Automatic Transaxle" menus. Record the DTC and description.
2. From the GDS, select:
^ Vehicle
^ "Auto Transaxle" menu
^ "Current Data"
^ "Input speed sensor" and "output speed sensor". Drive the vehicle and monitor the input and output speed sensors. If the sensors show:
^ Continuous output, the wiring currently has no open/shorts. Go to Step 6.
^ No output, go to Step 3
3. Check the wiring harness visually for an open circuit or short circuit to ground. Check for a pinched harness at the PCM/TCM attachment bolts.
4. Disconnect the connectors at the input and output speed sensor and PCM/TCM. Check for bent pins or pins not fully inserted into the connector.
5. If a harness open/short is found, repair or replace the ECM control harness between the PCM/TCM and transaxle and go to Step 8. If not, go to Step 6.

Aug 22, 2011 | Hyundai Sonata Cars & Trucks

2 Answers

Speedometer quit working and my transmission quit shifting at the same time,It has a 2.7 liter


Have the vehicle scanned and you will probably find that the output shaft speed sensor. This controls the signal for the speedometer and the shifting.

May 24, 2010 | 1997 Dodge Intrepid

1 Answer

1995 Maxima SE tach does not work at all. Car runs/ drives fine but no tach. 2 check engine light codes one for knock sensor(which I think is actually the o2 sensor from what I have read) the other from...


I am not familiar with this particular car, but the tach problem may be due to the speed sensor. I'd find the speed sensor and have it checked or replaced. My transmission has an input and output sensor. The input sensor feeds the tach (and the computer), the output sensor feeds the speedometer (and the computer). Also the knock sensor is critical to keep the car running efficiently without damaging itself.

Nov 14, 2009 | 1995 Nissan Maxima

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

259 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...