Question about 2001 Suzuki Swift

2 Answers

How do I check the transmission oil's level? - 2001 Suzuki Swift

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

How do I check the transmission oil's level? - ste_signum_t_4.jpg
Looking from under the car you will see the drain plug 25-30NM and the filler level plug above
Regards
Steve.
Please vote.

Posted on Mar 20, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, What transmission oil do I use for a suzuki swift , manual box 2001-2002 yr,any good branded make.?

Posted on May 02, 2011

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 65 Answers

SOURCE: how to check trans oil level

I assume that you have a 6 cyl.There are two plugs on the trans pan.the big one is the drain and the small one is the check plug.There is a fill on the side.The trans uses ws fluid which is what you need to use.What i do is remove the check plug and add fluid until it comes out.Then start the engine and let it warm up, the recomended temp is 97 to 115 degrees f or 36 to 46 degrees c.As it warms up the fluid will come out,once it reaches the temp range put the plug back in.I use a computer to monitor the temp but a temp gun on the pan will do.

Posted on Nov 28, 2008

66 chrgr
  • 1011 Answers

SOURCE: automatic transmission oil level

there is no dip stick but there is a bolt on the trans.that you take out to check level car needs to be on a rack up in the air i could find the bolt to pull out but it is hard to tell you were it is because some year it is in a different place,car has to running. if there are no leaks you wont need to check your fluid level! the bolt should be 7/16 head

Posted on Jan 25, 2009

michigan man
  • 3533 Answers

SOURCE: oil level

first start car and let it warm up and the transmission stick is under the hood up by the firewall

Posted on Jan 25, 2009

awcforever
  • 359 Answers

SOURCE: transmission oil level

If it is an automatic, I'm sure you can see the yellow dip stick under the hood, if its a manual.........you will have to jack the car up, and you will see two bolts on the side of the transmission, some have bolts, some have square holes, and some have allen key bolts, non the less, you will see two of them, one on the side about half way up, and one on the bottom for draining. The purpose of this is that when you take the one off of the side, if no fluid comes out, you can add some until it starts to dribble out, the hole is the full mark for lack of better terms. Hope that helps. If you have the square holes, a socket extension for a ratchet fits great....

Posted on Feb 15, 2009

  • 583 Answers

SOURCE: checking Manaul transmission oil level on 2001

there is a plug about 1/2 way along the side of the gearbox about 1/2 way from bottom to top undo that plug and the oil level is the bottom of that hole . put your finger in and oil should be right at that edge. it is difficult to do on the ground it is best on a hoist or a ramp or over a pit . there is no dip stick for this job .
"youdoit"



Posted on Nov 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission


There are two types of transmissions in 1991 Toyota Corolla. Manual Transmission and Automatic Transmission.
1. Manual Transmission:
The transmission oil is checked through a level bolt which is provided to the left CV joint side in the middle of transmission. To check the oil level, park the car on a level floor, remove the level bolt with 22 mm or 24 mm spanner. If the oil starts coming out of this hole the oil level is considered OK. If not, top up the oil till it starts coming out and tighten the bolt. The recommended manual transmission oil grade is 75W/ 90W and total capacity is 2.4 Litres.

2. Automatic Transmission:
Warm up the engine, park the car on level floor, pull up the hand brake, gear lever stick in P, keep the engine start, let the radiator fan come on, take the auto-transmission stick out, wipe it with a clean dust free cloth, insert it in, again take it out, keep the stick in horizontal position and check the oil level. At operating temperature the auto-transmission oil level should be at upper level (Hot). If not, add oil to mach the mark. The recommended auto-transmission oil is Automatic Transmission Fluid (ATF) Dexron II, and total (drain and refill) capacity is 1.4 Litres.

Oct 09, 2013 | 1991 Toyota Corolla

1 Answer

How many qts of oil do i need


Depends on your engine.

1980 JEEP CJ-7 2.5L 4-cyl Engine Code [B]
CAPACITIES
Engine, GM without filter..........2.4 quarts[1]
Wix Filter ........ 51040
Cooling System, Initial Fill..........8.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....25 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 4.2L 6-cyl Engine Code [C]
CAPACITIES
Engine, without filter..........5.0 quarts[1]
Wix Filter..... 51522
Cooling System, Initial Fill..........11.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....30 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 5.0L 8-cyl Engine Code [H]
CAPACITIES

Engine, without filter..........4.0 quarts[1]
Wix Filter..... 51258
Cooling System, Initial Fill..........13.0 quarts
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A904, 30RH..........7.0 quarts
3 speed A999, 32RH..........8.4 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

Oilman

Feb 02, 2013 | 1984 Jeep CJ7

1 Answer

How do i check a volvo 850 turbo's transmission fluid? do i have engine running? off? in park or neutral? thanks


Check the oil level as follows:

Park the car on a level surface with the engine idling . Slowly move the gear selector lever through all the shift positions and then to position P. Wait 3 minutes before checking the oil level.
As the illustration shows, the dipstick has a COLD and a HOT side. The oil level should between the MIN and MAX marks. Wipe the dipstick with a clean cloth.

WARNING! The oil may be very hot.



Do not use rags that could leave lint on the dipstick. The transmission is topped up via the dipstick tube. The space between the MIN and MAX marks on the dipstick corresponds to 0.5 US qt. (0.5 liter). Do not fill the transmission with too much oil, since this can result in oil being ejected from the transmission. Too little oil, on the other hand, can negatively affect transmission operation, particularly in very cold weather.

A Cold transmission: oil temperature 105° F (40° C). This is a normal temperature for the transmission after idling for about 10 minutes. At oil temperatures below 105° F (40° C), the level may be below the MIN mark.
B Warm transmission: oil temperature 169° F (80° C). This temperature after driving for about 30 minutes. At oil temperatures above 190° F (90° C), the level may be above the MAX mark.

Fluid type: ATF Dexron IIE and Mercon.

May 28, 2011 | Volvo 850 Cars & Trucks

1 Answer

I have an orange light with a oil can picture but its not the oil light an the coolant and windscreen wash is at the right level thanks


transmission fluid level is low, if it isn't the oil light, but as a precaution, check the oil level anyway just to be sure. If it is an automatic transmission, I do believe it would be the transmission fluid being low. check your fluid levels.

Nov 25, 2010 | 1994 Toyota Celica

1 Answer

Won.t shift into grear, how do i replace the tansmission filter?


TO DO A TRANSMISSION FLUID CHANGE YOU NEED HAVE TRANSMISSION FLUID ON HAND YOU NEED TRANSMISSION FILTER AND GASKET.YOU NEED 3/8 WRENCH THE RATCHET TYPE WITH METRIC SOCKETS. YOU NEED JACK TO RAISE VECHICLE SUPPORT VECHICLE ON JACK STANDS.YOU NEED A DRAIN PAN. ONCE YOU GET VECHICLE OFF GROUND.PLACE DRAIN PAN UNDER TRANSMISSION OIL PAN REMOVE OIL PAN DRAIN BOLT.LET FLUID DRAIN OUT IN DRAIN PAN THEN SCREW DRAIN PLUG BACK IN PLACE DONT OVER TIGHTEN.REMOVE OIL PAN AND GASKET. BESURE TO HAVE PAPER TOWEL ON HAND.MAKE SURE TRANSMISSION OIL PAN GASKET SURFACE CLEAN BEFORE INSTALLING NEW PAN GASKET. ONCE TRANSMISSION OIL PAN REMOVED. REMOVE THE OLD TRANSMISSION FILTER INSTALL THE NEW FILTER.THEN WITH NEW GASKET ON OIL PAN IN PLACE.OIL PAN NEED TO BE CLEAN SO THE GASKET ADHESIVE WILL HOLD PAN GASKET IN PLACE WHILE INSTALLING PAN AND GASKET TO TRANSMISSION.INSTALL OIL PAN BOLTS INSTALL THEM CRISS CROSS TORQUE PAN BOLTS TO 7 TO 10 FT LBS. LOOK IN OWNERS MANUAL FOR TRANSMISSION FLUID CAPACITY.BUY 10 QUARTS .TO BE ON SAFE SIDE SO YOU WILL HAVE ENOUGH FLUID ON HAND. IF YOU DONT HAVE NO TRANSMISSION FLUID CAPACITY. ADD 7.5 QUARTS FLUID.WAIT FOR 2 MINUTES.CHECK TRANSMISSION FLUID LEVEL ON DIP STICK. SHOULD BE ON THE FULL MARK.CRANK VECHICLE UP.LET IDLE FEW MINUTES CHECK TRANSMISSION DIP FLUID LEVEL IF DROPPED ADD LITTLE MORE.WHILE ENGINE IDLING GETTING WARM UP. KEEP EYE ON FLUID LEVEL.WHEN FLUID LEVEL STOP DROPPING. APPLY BRAKES HOLD FOOT ON BRAKES SHIFT THROUGH ALL GEARS TWO TIMES. THEN CHECK FLUID LEVEL SHOULD BE ON FULL MARK.CHECK FOR LEAKS WHILE ENGINE RUNNING.

Nov 19, 2010 | 1996 Ford F250 Crew Cab

1 Answer

Checking oil and transmission levels


you will check the oil with then engine off. Pull the oil dipstick (yellow one) and wipe clean. Reinsert the dipstick and pull out. The oil level should be in the hash marks. If the level is below the hash marks than start by adding one quart and recheck. One quart will change the oil level from the bottom of the hash marks to the top of the hash marks.

The transmission fluid needs to be checked with the engine running. Preferably warmed up to operating temperature. With your foot on the brake engage the transmission through all the gears and then back into park. With the engine still running remove the transmission dipstick (red one) and wipe clean. Reinsert the dipstick and pull out. The fluid level should be in btween the hot marks. If it is low start by adding 1/2 quart at a time through the transmission dipstick tube. You will need a funnel small enough to fit in the tube to do this. It will take a while for the fluid to drain out of the tube. Recheck check the fluid level and continue adding in 1/2 quart increments until the level is in between the hot marks.

Oct 27, 2010 | 1999 Saturn SL

1 Answer

Where is the transmission dipstick in my manual 1.3 liter 1993 suzuki swift located and where do i fill it up?


LEVEL CHECK With Oil Level Gauge Fig. 1: Manual transaxle oil level check - with level gauge 84241046.gif
  1. Drive the vehicle to bring the transmission up to operating temperature.
  2. With the engine stopped, remove the oil level gauge front the side case of the transaxle.
  3. Check the color and smell of the oil. If it is black in color or smells burnt, further transmission service is needed.
  4. Wipe off oil level gauge with clean cloth.
  5. Fit the oil level gauge to the transaxle side case so that the threads rest on top of the case.
  6. Remove the gauge and check oil level. The level should be between FULL and LOW level line.
  7. If the level is below LOW mark, add oil until the proper level is reached.
With Oil Level/Filler Plug
  1. Drive the vehicle to bring the transmission up to operating temperature.
  2. Raise and support the vehicle safely.
  3. Remove the transaxle oil level/filler plug.
  4. Check the color and smell of the oil. If it is black in color or smells burnt, further transmission service is needed.
  5. Transaxle oil level should be even with the bottom of the plug hole. If oil level is low, adjust oil level accordingly.
  6. Install transaxle oil level/filler plug and tighten to 40 ft. lbs. (54 Nm).
  7. Lower the vehicle.

Oct 17, 2010 | 1993 Suzuki Swift

1 Answer

Transmission fluid level check


The owner of the car should be able to check the oil fluid and coolant levels .get a clean peace of cloth.tools for removing trans axle /differential filing plugs. so that when the oil or fluid and coolant levels are checked they must be on desired levels.Locate the oil metering rod or dipstick and measure the lubricating oil level. Remove the transmission filler plug and check oil level. Remove differential oil filler plug and check oil level .Check fluid level .check coolant level.Observe all safety rules .Use the correct preventive maintenance procedures. If the owner can't do it then it is suggested that he should go to a car mechanic and the mechanic will do the job.

Oct 01, 2009 | 1999 Daewoo Lanos

1 Answer

Transmission stuck in neutral (automatic) won't engage drive or reverse


first i would check the transmission oil, do this by starting the engine and leave it running, select all the gears (park, Reverse, neutral etc) then put it back to neutral, leave engine running then locate the transmission dipstick in the engine bay, remove and wipe the dipstick, replace then pull out again, if the oil is showing between the cold and hot marks then level is ok. I shoing lower or none, top up the oil level with automatic tansmission oil, keep rechecking the oil level as adding oil as to ensure it is not over full. will need to select all gears again before checking oil level again.
If the oil level is correct than quite likley a Transmission failure will require mechanic.

May 02, 2009 | 1988 Nissan Pulsar

1 Answer

Where can I check the transmission fluid level on my Kia Rio 2001


On your trany u got a plug just like a transfercase on pick ups.. thats how u check the oil level..

Mar 29, 2009 | 2001 Kia Rio

Not finding what you are looking for?
2001 Suzuki Swift Logo

930 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...