Question about 2006 Chevrolet Impala

Open Question

How do i reset the low oil pressure sensor on a 2006 chevy impala?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

DAD5bbbbg
  • 111 Answers

SOURCE: low tire pressure light is on all tire pressure is

Turn off the radio and turn the key to the on postion. push the bottom knob ( to turn the station). Hold it in intell the info comes on. in the window it will show all the things you can reset. using the arrows to the right of the knob find tire reset the push on the station knob. this will reset it. then go back to the arrows and find end. push on the knob one more time and you will be done.( you have to make sure the radio is off). I hope this helps.

Posted on Feb 28, 2009

  • 10 Answers

SOURCE: 2000 chevy impala a/c low pressure port

PASS SIDE BY THE DRYER NEAR FIRE WALL.

Posted on Jun 28, 2009

  • 39 Answers

SOURCE: reset message center window

THIS SHOULD HELP YOU

Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three times within five seconds. If the CHG OIL SOON light flashes two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHG OIL SOON light comes back on, the system has not reset, repeat the procedure. Follow this procedure to reset the GM Oil Life System using the DE 100 Series Radio®. Turn the ignition to ACC or ON and the radio off. Press and hold the DISP button on the radio for at least five seconds until SETTINGS is displayed. Press the SEEK up or down arrow to scroll through the main menu. Scroll until OIL LIFE appears on the display. Press the PREV or NEXT button to enter the submenu. RESET will be displayed. Press the DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second. Once the message has been reset, scroll until EXIT appears on the display. Press the DISP button to exit programming. A chime will be heard to verify the exit.

Posted on Jul 02, 2009

  • 1 Answer

SOURCE: Reset my engine oil low in 2007 chevy impala

you sould be able to reset that from the dash ,these options beside the dash go to the end and when you get to oil and % press on the checkmark and that would do the trick.

Posted on Jul 18, 2009

  • 1 Answer

SOURCE: Need to find Low Pressure A?C Port 2001 Impala 3.8

The low pressure port is against the fire wall, look straight back and you will see it.
Greg

Posted on Aug 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What does low oil pressure on 2008 Chevy Impala 3.5 V6 LS


Do you mean what causes low oil pressure? This is a very reliable engine for the most part. If the oil light is on or gauge is reading low, have the oil pressure sensor inspected for failure. These sensors do go bad.

Jan 27, 2016 | Cars & Trucks

1 Answer

I have a 2006 impala. On the highway the dinging wont go off on the oil light. It says oil pressure low turn off engine but I changed oil today. The dinging just wont stop!! What's wrong??


Hi stevie, your Impala probably has a defective sensor, often called a "switch" that senses the oil pressure. The oil light and chime is a result from a false signal from the bad sensor.
But one cannot take a chance. If the sensor is acting properly, and pressure is low, it could really damage your engine to have low oil pressure and oil not pumping properly. Have it checked now. A new sensor should cost about 60 dollars & takes only a few minutes to install.

Good luck. i hope this helps. Please rate me a FixYa.

Jul 01, 2011 | 2006 Chevrolet Impala

1 Answer

My 2006 chevy impala 9:57:21 AM keeps saying oil pressure low and shut engine off how do I fix it


chec the oil level on dipstic -if ok then the pump in the pan may be failin or theres a clog in the block passages--cud be a faulty intrument too

Jan 19, 2011 | 2006 Chevrolet Impala

1 Answer

A light comes on in my car that says oil pressure low stop engine now but i have oil in my vehicle and even had the car checked for my 2006 chevy impala


If the light is only turning on during acceleration or deceleration and then goes off, this is normal. If the light is constant, and you are sure you have oil that is up to the "full" or "max" level on the dipstick while hot, then it might point to a faulty oil pump or worn gaskets that will no longer prevent the oil from staying in place in the engine. Is this light accompanied by a check engine light. If so what is the code. You may also have a faulty oil sensor. Hope this helps

Apr 09, 2010 | 2006 Chevrolet Impala

2 Answers

OIL PRESSUE LOW


At some point, your engine is registering low oil pressure and warning you the oil pressure is insufficient to lubricate the engine properly.

How does the engine know this? What causes it? Excellent questions. The engine 'knows' this because there is one or more sensors that read the oil pressure all the time. The sensors report to the computer which reports to you. They could be faulty. On the other hand, there could be times when oil pressure IS low. Your oil pump may be mal-functioning. Normally, I would expect the oil pump to either do its job properly or NOT do it properly but not act intermittently. It may warrant being checked by a professional. Another reason for this condition could be the oil itself, though you report you just had it changed. Presumably, whom ever did the change put in the proper oil grade, service and weight, recommended by GM.

Another thought, is this warning seen by you immediately after you start the car? If yes, it is normal for oil to take a second or two to build the proper pressure, particularly in cold weather. Where I am at, it is cold. Oil doesn't like to move when it is cold (like me) so it takes a bit of time to get up pressure (like me).

If this continues, you may want to have this problem looked at by a professional, as I said.

Thanks for your interest in FixYa.com

Feb 18, 2010 | 2006 Chevrolet Impala

1 Answer

Like 3 days after i got my oil changed in my 2006 chevy impala the low oil pressure shut off engine light comes on


This is an idication of a severe oil leak. Check the oil level in your engine to see if there is any in it. Add to the full mark and return to the oil change shop and ask them to see where the leak is. Do not operate without oil. Severe engine damage will occur. Hope this helps Moe

Apr 28, 2009 | 2006 Chevrolet Impala

2 Answers

TPMS on 2006 Chevy Impala


I have an 05 impala and there is a setting in the Radio to reset the oil life and TPMS system, I'd look in the owners manual to see how to access this feature on the 06 but it should be there.

Oct 03, 2008 | 2006 Chevrolet Impala

Not finding what you are looking for?
2006 Chevrolet Impala Logo

Related Topics:

324 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...